Model # 35100

Internet #203596490

Store SKU #400603

Latex-ite Pli-Stix 4 lb. 30 ft. Medium Gray Permanent Concrete Joint and Crack Filler


Pli-Stix 4 lb. 30 ft. Medium Gray Permanent Concrete Joint and Crack Filler

  • Fill your concrete joints & cracks permanently
  • Lifetime Guarantee…works on faded blacktop as well
  • Just pack and melt
$1599 /each
store icon Loading Buying Options...
package icon Loading Buying Options...
Sorry, but we ran into issues loading these options. Please try refreshing.

Frequently Bought Together

Product Overview

Introducing the only permanent filler for concrete joints and cracks: 30 ft. Pli-Stix medium gray permanent concrete joint and crack filler. This product originated from federally specified highway jobs but the only difference is you do not need a 200 Gal. melter to apply it. Pli-Stix is permanent because it is applied with heat (a simple hand held torch) and it bonds to the sidewalls of the crack. Cracks open up because they expand and contract with freeze or thaw cycles - but Pli-Stix will expand and contract right along with mother nature. Medium Pli-Stix is designed for joints and cracks 1/2 in. to 1 in. in Dia.

  • For concrete joints and cracks 1/2 in. - 1 in. (12.7 mm - 25.4 mm) in Dia
  • Hot applied, self-leveling, gray, rope-like filler bonds to sidewalls for a permanent seal
  • 30 ft. (9.1 m) of medium gray Pli-Stix
  • Traffic ready in approximately 20 minutes
  • For deep cracks or joints, before you begin fill the crack using closed cell high heat backer rod, sand, or stone dust but leave enough room for product
  • Chlorine resistant - great for pool deck concrete joints
  • No volatile organic compounds
  • Prevent slip, trip and fall accidents

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.




Warranty / Certifications

More Products With These Features


Customer Questions & Answers

Can I use a long household lighter to melt this or does it have to be a torch (which I dont have)

Asked by: Jose
The lighter will not be enough.
Answered by: DrivewayDan
Date published: 2016-12-13

Can this product be used for 1/8 crack. I will need to open crack a small bit to get all concrete...

Can this product be used for 1/8 crack. I will need to open crack a small bit to get all concrete chip, dirt and debris out.
Asked by: Tberry
too big for 1/8 crack
Answered by: Tim
Date published: 2017-06-12

Hydrostatic pressure

I'm in a situation where water seeps through a crack in my basement floor in severe weather due to hydrostatic pressure. Will this product solve my problem?
Asked by: Davidh
no this will not!!! look to the concrete crack fillers , home depot sells. i have read reviews on them and they seem to work alot more work mabey a professional job but sadly thier are no promises no matter what you do! A cracked wall is a cracked wall! if someone telles you they can fix it take it with a grain of salt!!!
Answered by: Tim
Date published: 2017-06-12

If you have a little bit left in a package, can it be heated

Asked by: Wendy
It cannot be used in that manner.
Answered by: CommunityAnswer
Date published: 2016-06-29
  • y_2017, m_7, d_19, h_15CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_12
  • loc_, sid_203596490, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 97ms

Customer Reviews

Pli-Stix 4 lb. 30 ft. Medium Gray Permanent Concrete Joint and Crack Filler is rated 3.7 out of 5 by 27.
Rated 3 out of 5 by from In areas where the sun shines and you have a... In areas where the sun shines and you have a slope, as the sun hits it, then the product will slowly ooze away, down the slope each time. Likely works well for flat areas. Did not work for my needs.
Date published: 2017-07-11
Rated 5 out of 5 by from Worked extremely well. Easy to use. I'm a 62 yr... Worked extremely well. Easy to use. I'm a 62 yr old lady who enjoys DIY jobs. Would highly recommend.
Date published: 2017-05-02
Rated 1 out of 5 by from does not flow like black product!!! does not flow like black product!!!
Date published: 2017-06-12
Rated 4 out of 5 by from The repair of 1 inch gaps in my concrete. This is the first time using this product. The gap that I was trying to fill was 1 inch in width in most of the places I needed to repair. I had to apply the PLI-Stix several times in order to fill the cracks. First I layed the PLI-stix in the bottom of the crack and melted the material. I added more to it to bring it the the top surface of the concrete. The material was very easy to melt using a hand held propane torch. I just need to see how this material will react with the freezing cycle in this location. One plus, I will be able to melt the material again next year if needed.
Date published: 2014-10-13
Rated 4 out of 5 by from Good, Not Great With a long driveway, I've had a fair amount of experience withe Latex-ite products. I especially like the asphalt version of the Pli-Stix, which give a lasting fix better than any cold repair product. I was hoping for the same with this concrete (gray) version but was somewhat disappointed. It's less forgiving and requires low, steady heat and doesn't flow as readily and evenly as a result. Too much heat will cause it to bubble and burn and you'll end up spending more time correcting the damage. It's likely to work best on joints and relatively deep cracks since it is not as self-leveling as they claim, and you can't use high heat to spread the product out as is possible with the asphalt version. Overall this stuff is tenacious and provides a strong repair when used properly, but care needs to be exercised if appearance is important.
Date published: 2013-05-04
Rated 1 out of 5 by from Would not recommend. This product was very difficult to melt. (However this same product in black was very easy to work with.)
Date published: 2016-07-27
Rated 4 out of 5 by from Good product, but too shiny after heating This is a good product. We used a heat gun at high temperature. It took a while to do just one strip across the sidewalk but it filled well and did adhere to the sides of the concrete. It takes a lot more product than I thought. I foolishly filled the deeper cracks with backer rod which just melted and turned black long before the Pli-Stix melted. I've not used any other filler product so I can't compare but this is a good one if you have the patience to wait for it to melt. I think using a blow torch would be a better option. It looks shiny after heating it. I would take the advice of several reviewers and sprinkle sand on top of the Pli-Stix before it cools so it matches the concrete better. It looks great that way.
Date published: 2016-07-01
Rated 1 out of 5 by from Big disappointment The only thing that was accurate in the literature was the color of the material!! It required double the amount of rope to fill a 1/2" crack. It states on the package, "MEDIUM SIZE FILLS CRACKS1/2" - 1" WIDE". It does NOT melt evenly and does not harden with a smooth surface.. I ordered material for 155 feet of 1/2 inches of crack. I have completed 9 1/2 feet in 4 hours of uninterrupted work in 80+ degree weather. The cracks have been back filled to a depth of 1/4" with sand prior to laying the material and melting it. Have lots of Propane and time on hand.! The concept is great.
Date published: 2015-07-02
  • y_2017, m_7, d_19, h_3
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_27
  • loc_, sid_203596490, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 125ms