Rated 4.3 out of 5 by 12
Rated 4.0 out of 5.0 by Mikey95 Nice alternative to a Mustee fiberglass sink
Nice tub, smooth finish, installed fairly easily (tho this was only the second sink, I'd ever installed). Good installation instructions. Installer has to drill a faucet opening and it was very easy using a new (sharp) hole saw. The sink looks a bit more upscale than a Mustee fiberglass tub, but at a reasonable price point. Shipped in a corrugated box with corrugated corner protectors so there is low risk of shipping damage. The drain fitting is plastic and has an old style rubberish stopper; functional enough but I wonder how long it will hold up.
November 21, 2013
Rated 4.0 out of 5.0 by Verified Reviewer Self rimming laundry tub
Nice sink. Shiny white finish. VERY hard Fiberglas material. I drilled out the knockouts, and it took a while. Used a 1/4" bit, making lots of holes in a circle, then broke out the pieces between the holes. Then I cleaned up the holes with a coarse half round file. A hole saw would have worked better, but would have dulled quickly from the hard Fiberglas.
Also, the sink is 13-1/2" deep, not 15" as stated. It is about 15" to the bottom of the drain fitting, but that is not sink depth.
Was shipped to ak for free!!
February 26, 2013
Rated 5.0 out of 5.0 by Maxim solid A
good quality, heavy duty, rigid construction. tough fiberglass material. much better than cheaper sinks with legs.
January 13, 2015
Rated 4.0 out of 5.0 by hookemhitz Nice looking tub
I guess I was thrown off by the word "stone" in its name. I was thinking something that had a stone finish or look. When I opened the box, and saw a shiny finish, I thought they had shipped me the wrong product. Then, after going back to the website and reading other reviews, they all commented on the shiny finish. SO, once I got over the shock of it looking like a higher quality plastic tub, and not a "stone" material tub, I like it. What is more important, my wife LOVED it, and she did not know about the stone deal. She was thrilled with the quality and "shine". The drain is really old school, though, and a bit of a disappointment. Functional, but not appropriate for the extra money we paid for the "stone" material. It is installed level, but water remains around the drain when emptied. It will require drying that out each time it is drained, or it will cause problems. This tub should have had a traditional drain installed, like a kitchen sink drain.
July 22, 2014
Rated 4.0 out of 5.0 by Larry This laundry tub has a nice shiny finish and the shape fully utililizes the space it is installed in.
This is an excellent product and looks great installed in my new cabinet. This is a much better tub than I found available in local store stock at several locations. It would be easier to install if it came with a template. It fits fine in a 24 inch countertop. The soap tray at the back is smooth for easy cleaning but, it could be a little wider to hold soap dish on it.
March 7, 2014
Rated 4.0 out of 5.0 by wvwoodhacker Well made utility tub.
Fit and finish was as expected, with easy installation in my shop built laundry stand. All plumbing fixtures installed perfect, leak free by following the drain instructions as provided. I drilled out the knockouts for the faucet installation because my faucet was center hole only. Would like to see manufacture provide better hold down hardware, but I constructed my stand with extremely tight tolerances and hold downs were eliminated.
December 12, 2012
Rated 4.0 out of 5.0 by 1234 Great product. Exactly what I needed to fit my cabinet.
Great product. Perfect fit looks look in my utility room.
June 3, 2014
Rated 5.0 out of 5.0 by DinoDave Just what I wanted, looks great.
Installs as expected in minimum 27" cabinet. I used it in a 24" cabinet and had to cut out some side at the top but I expected to. Finishes off great with the self rimming edge. Accepts 4" and 8" faucet sets and is marked out for you. Had this job done quickly and easily with no surprises because of design. Looks great in my new laundry room. Includes drain assembly and plug.
February 5, 2013