Model # R50-08829-CW4

Internet #100356849

Store SKU #249408

Store SO SKU #162677

Leviton Plastic Keyless Lamp Holder
0078477103180

Leviton

Plastic Keyless Lamp Holder

  • Compatible with a dimmer and LED/CFL bulbs (sold separately)
  • An affordable way to replace an outdated or inefficient holder
  • Backed by a 1-year limited warranty
$139 /each

Frequently Bought Together

Product Overview

Leviton offers a complete line of incandescent, fluorescent and specialty lamp holders designed to the highest standards of quality, dependability and performance. A variety of types and styles have been custom-designed for any application. Replacement accessories and extended pull chains allow you to easily update or retrofit existing fixtures.

California residents: see   Proposition 65 information

  • White finish coordinates with any surroundings
  • Installs in closets, garages, basements, utility rooms and attics
  • Suitable for indoor use only
  • For use with a standard wall switch
  • 600-Watt
  • Meets UL and CSA quality and safety standards

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

How Many of these can you safely wire together, assuming they will be plugged into a normal 120 outlet?

Asked by: chuck
That depends on the amps/amperes of that circuit, most common are 15 or 20 amps....15amp ×120volts gives you 1800 watts....from there add up your wattage on that circuit....you should be able to run quite a few low watt light bulbs. Most electricians stay under 80 percent of that max.
Answered by: RCA
Date published: 2017-01-07

Ground screw?

With only one brass + silver terminal, where would I wire the ground from my 14/2?
Asked by: lovinNC
There is no ground screw on this fixture because there are no metal parts that can be accidentally electrified, only the metal parts that conduct electricity to the lamp and attached to the hot and neutral conductor. now the bare ground wires in the box may still need to be attached to the box if it is metal.
Answered by: Reddog
Date published: 2016-06-02

what are the extra terminal screws for?

four terminal screws, two for power source and the other two i assume can be wired to provide power to another lamp holder if needed. correct? thanks.
Asked by: Franco
I don't believe that these screw terminals should be used under normal conditions as a termination point to feed through to other devices. The only reason for them is to create a tamper resistant configuration like that used in fire alarm systems, so as to open the monitored circuit when removed and cause a trouble alarm at the monitoring device. I would wire-nut the through wires together inside the box and tail-out the appropriate conductors for the individual light fixture to be terminated on one set of the screws, and tightening the other set as to avoid accidental contact.
Answered by: Reddog
Date published: 2016-06-02

Will these accommodate LED's and dimmer?

Will these accommodate LED's and dimmer?
Asked by: Alberto
Yes, you can wire a dimmer to control the bulb (incandescent, CFL, or LED).
Answered by: levitonProductExpert
Date published: 2017-02-10
  • y_2017, m_5, d_25, h_9CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_7
  • loc_, sid_100356849, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 33ms
  • QUESTIONS, PRODUCT

Customer Reviews

Plastic Keyless Lamp Holder is rated 4.6 out of 5 by 5.
Rated 5 out of 5 by from Good value Good value. 100% fit for the job. Easy to connect and install.
Date published: 2011-12-08
Rated 5 out of 5 by from Easy to install and effective, just what I needed. This product did just what I needed it to. I needed to replace some old light fixtures that were wornout, broken or damaged during my garage remodel and this product did that with an effortless install. The product is inexpensive which for me was an added bonus.
Date published: 2011-12-06
Rated 4 out of 5 by from works as promised... simple installation. need new light over kitchen sink, replacing old long fluorescent tubes. easy install and used led kit. worked out great.
Date published: 2014-08-26
Rated 5 out of 5 by from Excellent The two (2) I purchased worked very well in the light box for tracing I made my Wife for Christmas. God Bless Home Depot and thank you for being there for me.
Date published: 2012-01-17
Rated 4 out of 5 by from product good picture does not depict actual product. This product does not have a pull chain! Its plastic not porcline.
Date published: 2011-09-20
  • y_2017, m_5, d_24, h_22
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_5
  • loc_, sid_100356849, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 18ms
  • REVIEWS, PRODUCT