Model # R50-08827-CW4

Internet #100356848

Store SKU #249285

Store SO SKU #162677

Leviton Plastic Pull-Chain Lampholder
0078477103128

Leviton

Plastic Pull-Chain Lampholder

$3.29 /each

Frequently Bought Together

Product Overview

Leviton offers a complete line selection of incandescent, fluorescent, and specialty lampholders designed to the highest standards of quality, dependability and performance. A variety of types styles have been custom designed for any application. Leviton Lampholders offer a safe and efficient lighting of closets, garages, utility rooms, basements, attics and other indoor closed spaces.

California residents: see   Proposition 65 information

  • White finish
  • 660-Watt/250-Volt
  • 1-piece, pull chain, top wired, medium base
  • Single circuit, outlet box mount incandescent lampholder
  • Box mount
  • 660-Watt / 250-Volt

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

5 Questions9 Answers

Customer Questions & Answers

Plastic Pull-Chain Lampholder
Plastic Pull-Chain Lampholder

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
This question is from Plastic Pull-Chain Lampholder
 
2 answers

is the outlet hot all the time .?,and can you change it to either -or?

This question is from Plastic Pull-Chain Lampholder
July 3, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
Detroit, MI
Read all my Q&A
Home Improvement Profile: Professional
October 18, 2016
Answer: 
It all depends on how the light is wired up. To be on the side I would have someone that knows how to do this type of stuff to help you out.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

July 8, 2016
Answer: 
The outlet is always hot.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
This question is from Plastic Pull-Chain Lampholder
 
2 answers

Can I string 3 of these lights on the same power line?

This question is from Plastic Pull-Chain Lampholder
Asked by
Read all my Q&A
December 23, 2015
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
Detroit, MI
Read all my Q&A
Home Improvement Profile: Professional
October 18, 2016
Answer: 
You should be able too. Again, with any electrical work it all come down to how the line is wired for the box and if anything else is connected to that line.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

January 6, 2016
Answer: 
You can use the 8827-CW4 for your application.
-1point
0out of 1found this answer helpful.
Was this helpful?helpful0unhelpful1
This question is from Plastic Pull-Chain Lampholder
 
2 answers

I have several of these mounted on the wall. Is there a clip of lamp shade that will work with this fixture?

This question is from Plastic Pull-Chain Lampholder
Asked by
Read all my Q&A
October 6, 2015
I am looking for a shade that can be mounted over the bulb, ideally looking like a wall sconce. I have seen clip on shades that mount over a bulb that hangs down or points up, but not one coming out from the side. Is there anything that will go with this fixture if it is wall mounted?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
Detroit, MI
Read all my Q&A
Home Improvement Profile: Professional
October 18, 2016
Answer: 
Not real sure but over the many years that I have been around them I have never seen one.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

October 9, 2015
Answer: 
Unfortunately we do not have anything that will work for that application.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
This question is from Plastic Pull-Chain Lampholder
 
2 answers

i have a room with no light fixture, how can i mount a light bulb on ceiling with a on/off switch?

This question is from Plastic Pull-Chain Lampholder
Asked by
new york
Read all my Q&A
November 20, 2014
the light bulb needs a pull string and to have a long plug cord ? like the plastic pull chain lamp holder... but its missing a long cord to plug in wall.. is there such a thing?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
Garden Grove
Read all my Q&A
Home Improvement Profile: DIYer
November 30, 2014
Answer: 
1. Shut off the circuit breaker, find a near-by outlet or other power source you can splice into with new wire.
2. Select desired switch and light fixture for the room and pencil their locations. Verify mounting holes can safely be drilled into the desired spots marked in pencil without damaging existing piping or wiring within the walls.
3. Run new wiring out from power source to the penciled locations
Read More
1. Shut off the circuit breaker, find a near-by outlet or other power source you can splice into with new wire.
2. Select desired switch and light fixture for the room and pencil their locations. Verify mounting holes can safely be drilled into the desired spots marked in pencil without damaging existing piping or wiring within the walls.
3. Run new wiring out from power source to the penciled locations of the light fixture and switches, do not connect the wires yet.
4. Following mounting directs for the fixture and switches carefully.
5. Once hardware is in place, connect the wires according to the lighting/switching configuration you desire exactly as instructed by manufacturers installation information provided.
*If successful, you should now be able to turn the breakers back on and use the new light as normal.
Any problems along the way should be addressed by a licensed electrician. Read Less
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Orange,Calfornia
Read all my Q&A
Home Improvement Profile: Professional
November 22, 2014
Answer: 
Hi wenn,
This fixture, one of the oldest types around, requires you to hardwire it, or install it on the wall or ceiling in an approved junction box.
If you need something that has a plug that will go into the wall, I'd recommend you buy that does have that included; if the image doesn't have it or in the item description, then it doesn't have a plug attached to it (like this item).
We carry a good Read More
Hi wenn,
This fixture, one of the oldest types around, requires you to hardwire it, or install it on the wall or ceiling in an approved junction box.
If you need something that has a plug that will go into the wall, I'd recommend you buy that does have that included; if the image doesn't have it or in the item description, then it doesn't have a plug attached to it (like this item).
We carry a good selection of work lights and temporary plug in lighting here online and at your local Home Depot store.
Joseph Read Less
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
2 »
  • 2016-10-30 T23:39:16.872-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_100356848, prod, sort_default
2 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 43ms
  • QUESTIONS, PRODUCT

Customer Reviews

Plastic Pull-Chain Lampholder is rated 2.4 out of 5 by 21.
Rated 2 out of 5 by from Very disappointed with directions I wanted to use the sealed screw areas because the hole in ceiling was smaller and I thought they would have designed it to punch out but they were impossible to remove. Illustrations on package were poor and there should be a simple video on how to install. Instead of having all these foreign languages on the package, put more detailed directions on it instead. The directions were a joke!
Date published: 2016-09-20
Rated 1 out of 5 by from The price reflects the quality. In 7 years, had to replace it twice in our basement. The pull cha... The price reflects the quality. In 7 years, had to replace it twice in our basement. The pull chain mechanism is cheap plastic. Hoping to have the basement finished before the 3rd one breaks.
Date published: 2016-10-28
Rated 4 out of 5 by from Great for the price They changed them up from years ago. Now they have a tab that pushes down on the wires instead of trying to wrap the wire around the screw.
Date published: 2016-10-18
Rated 4 out of 5 by from Easy installation and works great. No problems. Easy installation and works great. No problems.
Date published: 2016-10-25
Rated 5 out of 5 by from Simple to install. Simple to install.
Date published: 2016-11-22
Rated 4 out of 5 by from Easy to Install . Easy to Install .
Date published: 2016-10-26
Rated 1 out of 5 by from Not worth buying. Chain Breaks Bought this to replace a very old pull chain fixture. Very difficult to turn on and off. Suddenly, while pulling on chain to turn off, the chain snapped off the fixture...No way to turn off the light. Have to unscrew light to turn off. Now need to buy a new fixture..Unit to cheap to repair. .I highly recommend buying something other than this product.
Date published: 2016-05-11
Rated 1 out of 5 by from Very Disappointing Had to replace two of three within two years. Unless China has fixed, pull chain operated very hard and did not last with normal use. Store does not stand behind this basic product, which should last for years, after it fails in a couple.
Date published: 2016-01-13
  • y_2016, m_12, d_9, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_21
  • loc_, sid_100356848, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 57ms
  • REVIEWS, PRODUCT