Rated 4.1 out of 5 by 27
Rated 5.0 out of 5.0 by 1111 match
matched an existing one that was broken xxxxxxxxxxxx
January 5, 2016
Rated 4.0 out of 5.0 by BobsMom Good for my project
I used these to install a slide out table in a cabinet I custom built for my camper. These were perfect for that use because I didn't need something that was going to be used everyday or would support a bazillion pounds. The steel frame work that actually does the business end of the support work is good. Do I think the 'wheels' that the drawer rolls out on would stand up to daily use in my kitchen with heavy pots and pans? Nope. I'd go for Blum every time for an application like that. But for occasional and light use these are great. Super simple to install and have held up well to the camper which rattles around a bit on the road.
December 4, 2014
Rated 3.0 out of 5.0 by Bruce They work just fine
They do their job. I wish I knew if the weight limit were for the closed position or if that were for the leading edge at full open. (I'd really doubt the latter, but who knows?) It handles my 35# leading edge working load just fine. But I also put a roller in, just in case.
July 12, 2016
Rated 5.0 out of 5.0 by Jenna Easy to use
These drawer slide are easy to install and have a smooth glide. This comes as a pack of 2. One slide set for each side of a drawer.
September 22, 2015
Rated 5.0 out of 5.0 by JF This will become my standard drawer slide
There is nothing fancy about these slides, all they do is work as described, and that they do very well.
I just finished a 4- drawer utility cabinet with the 18 inch slides yesterday, and I'm looking forward to the 7-drawer-12-inch project that's on my list for today.
Just follow the (very simple) instructions. These slides almost extend full length, are self-closing and run smoothly, for a fraction of the costs of telescoping slides.
They are also really easy to install: If you build a cabinet, you can install the halves that go on the side walls first, before assembling the cabinet, while the work piece iis still flat on your workbench. Same for the halves that go on the drawers - mount them on your workbench, and then just slide the drawer into the cabinet..
July 7, 2016
Rated 4.0 out of 5.0 by HandymanC Good product
The only thing that can be improved upon is better guidance for selecting the proper length. I was unsure what the actual size would be for my situation. I probably could have used the next size, but made these work.
May 10, 2016
Rated 5.0 out of 5.0 by RealPersonJacob Excellent (IF YOU INSTALL CORRECTLY)
These will make your drawer slide gently and freely like air! BUT, only if you install it correctly, meaning make sure you them exactly lined up, and make sure they are level. Our house came with these on all the drawers, and many of our drawers have problems because whomever installed them did a bad job, not because of the rails. MAKE SURE THE rails ARE LEVEL and have the appropriate amount of space between themselves and the drawer/wall (or mounting stud), and they will work PERFECTLY like an expensive set of steel ball bearing slides for a fraction of the cost. Of course, I built my own drawers and the rails I mounted them on, so I was easily able to adjust those factors. I turned some fake drawers into real drawers in my kitchen using these rails. I would recommend these rails (just make it a perfect fit and also level and your drawer and it will glide perfectly using these rails)
January 29, 2014
Rated 5.0 out of 5.0 by Pepi Good cheap product that works
My son's computer desk had a fancier system with ball bearings. The grease made a mess when it broke.
This is easier, cleaner and actually feels stronger. Have the same on my desk and it's been working fine for 15 years.
Screws seem a little iffy, but with drilling a pilot hole first, seem to hold fine.
December 7, 2015