Rated 4.1 out of 5 by 44
Rated 5.0 out of 5.0 by DaninKaty Easy install smooth movement
Very easy to install both parts of the slide. Easy to disconnect to remove the drawer. The drawer work smoothly empty and when full. Installation only a matter of minutes. Very nice product for the price. Will purchases drawer slides again.
August 1, 2016
Rated 5.0 out of 5.0 by KAT Perfect for the repair
Used to repair keyboard tray on my desk. good quality slider!
May 10, 2016
Rated 4.0 out of 5.0 by HEADKNOCKER Nice "Heavy Duty" Drawer Rail
I bought "ONE" of these to replace the drawer slides of my garbage can holder in my custom Haas cabinets, which BTW lasted 20+ years, I worked pretty good other than the inner most brackets where different but all the rest exactly the same, So I dismantled each slide & put the old brackets on & reassembled & simply screwed the units in place, The other inner rails were just screwed to the drawer assembly with supplied screws..
Slid together & it's working great & hopefully will be going for another 20 years, You gotta figure the garbage can gets open about 100 times a day & being the last one lasted 20 years that's way over a million openings & has about 20 pounds hanging on it at all times..
Great Item at a great price..
March 16, 2016
Rated 5.0 out of 5.0 by Doresoom Heavy Duty
These drawer slides were the perfect solution for adding a drawer to a tool cart I had built for the garage. There was a ton of space being unused, but a shelf would have been too awkward to access.
The full extension feature allows for easy access, even at the back of the drawer, and the 100 lb capacity of the pair means I can pack a ton of tools into it without having to worry about it collapsing.
Installation was easy, and the drawer slides even seemed to be pretty forgiving for small misalignments. I think my setup was actually 1/8" out of square over the 20" span from front to back, but I haven't experienced any binding. The drawer snaps close with a satisfying clunk. They're not self-closing, but they do have good retention when they're closed.
We'll see how they hold up over time, but for now they're doing great!
April 30, 2016
Rated 4.0 out of 5.0 by Dfwbassist beware the top rail
These slides are well made and quite durable. However, I purchased 8 pair of these and 5 were square and flat along the top (perfect for setting a level on) and the other 3 were beveled along the top and level wouldn't sit flush. Hardly a reason to pass up on a great drawer slide, just wanted to give a heads up
August 4, 2016
Rated 3.0 out of 5.0 by BruceB Full Extension, Yes - Easy close, No
The drawer slide is heavy duty as represented and does allow full extension of the drawer as I needed. However, to completely close the drawer the last half-inch or so, it requires what I think is too much pushing on the drawer. I would have expected the drawer to close more easily at the very end of its slide. For that reason, I rated it average.
July 6, 2016
Rated 5.0 out of 5.0 by Jonathan Great product
I purchased 6 sets of these slides for a tool cabinet that I built for the garage. I chose these slides over some less expensive ones for the 100 lb. rating and heavy duty requirements. Easy to install and work great!
July 5, 2016
Rated 4.0 out of 5.0 by Follis Isn't there an easier way to install drawer slides?
These drawer slides are of good quality and no worse to place than others I have done. The problem, as always, is spacing them so they are exactly parallel. If your normal tolerances are 1/16, think 1/32. The width between door slides on the cabinet needs to be equal between the front and back. The door needs to be square with the same width from to back within 1/32. If you meet these tolerances, they will slide like a dream. If you don't, add lots of time and frustration to the project.
July 15, 2014