Model # D66320C-W-TS

Internet #202200630

Store SKU #385531

Store SO SKU #1000669179

Liberty 20 in. Side Mount Drawer Slide (1-Pair)


20 in. Side Mount Drawer Slide (1-Pair)

  • European style drawer slides
  • Mounts to the side of the drawer
  • White finish blends well into light cabinets
$698 /each

Frequently Bought Together

Product Overview

Liberty 20 in. Side Mount Drawer Slides (2-Pack) hold up to 100 lbs. including a drawer and its contents. When installed, the left and right slides and hardware allow smooth opening/closing. These slides are designed for easy installation.

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.




Warranty / Certifications

More Products With These Features


Customer Questions & Answers

My drawers have 3/16" clearance on either side. What is the minimum clearance for this slide kit

The opening for the drawer is 20". The drawer is 19-5/8" wide
Asked by: mad58285
Each kit is a little different. You would need to open the install instructions on this model to tell. To see a similar model video that gives reference to the clearance refer to :
Answered by: ceramicbrad
Date published: 2016-10-19

Does the white paint on the Euro Slide contain lead?

Asked by: Rae
No lead paint used in the US (legally) since 1978
Answered by: ron
Date published: 2016-12-07

I'm planning to build my own drawers with melamine boards for my pantry. will these work?

the shelves will be 11 3/4" deep so I need to know if these are 18" fully closed.
Asked by: rob
you can cut them to length if you buy longer than needed. If unsure measure length needed to close drawer(from drawer end to inside face of drawer). Also video installation tips on youtube and on this site under european drawer slide.(see
Answered by: ceramicbrad
Date published: 2016-10-19

Have a Hampton model HWH36D vanity . Will these be a replacement for the drawer slide . There are...

Have a Hampton model HWH36D vanity . Will these be a replacement for the drawer slide . There are two drawers on the right side and the bottom one is defective .
Asked by: Mick
According to the instructions on that vanity it looks like they use ball bearing slides similar to our D806, not roller slides like these. Unfortunately they do not specify a length, size or supporting hardware. Glacier Bay (a Home Depot brand) may be able to provide more information.
Answered by: LibertyHardwareSupport
Date published: 2016-11-14
  • y_2017, m_5, d_25, h_24CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_6
  • loc_, sid_202200630, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 102ms

Customer Reviews

20 in. Side Mount Drawer Slide (1-Pair) is rated 2.4 out of 5 by 16.
Rated 1 out of 5 by from Worst ever First of all these notthe size they mention theyare all a half inch off.
Date published: 2016-12-30
Rated 1 out of 5 by from Nice slide but screws are terrible The slides are nice but the screws supplied are terrible. They are supposed to have a phillips slot in the screw head but for many screws in the package, the slot is either too shallow or non-existent. The screws are soft and strip or break easily. There is no economy when you have to buy your own screws. This is poor quality control. You have to be very careful buying your own screws because Home Depot's store sold screws have too big a head for the slide.
Date published: 2016-08-23
Rated 1 out of 5 by from Poor Quality drawer slides Left and right case slides did not match in that the front rollers were 1/8 inch different vertical location. Screw did not match phillips bits so had to be replaced. In summary slides are knockoffs of a Very Poor quality that caused considerable waste of time on install.
Date published: 2016-07-22
Rated 1 out of 5 by from Screws are junk Screws supplied have heads that are too small for the smallest holes in the slide.
Date published: 2016-10-18
Rated 5 out of 5 by from Works well. It is so nice to have drawers instead of shelves in the pantry and under the new range top stove. They slide out nicely with this product and make things much easier to get out, use and put away again.
Date published: 2012-06-08
Rated 1 out of 5 by from WRONG DESCRIPTION ON HOME DEPOT WEBSITE Home Depot website says these have a 100 lb. capacity. Interior packaging says 50 lbs. Not good enough for our application. Hardly worth the trip to return; will go elsewhere.
Date published: 2016-10-20
Rated 1 out of 5 by from Bowed under weight These slides bowed under the weight of a single layer of canned goods I had put on a sliding shelves in my pantry. I had to reinforce them with stock between the slides and the cabinet wall.
Date published: 2016-05-03
Rated 3 out of 5 by from They work OK. The only complaint I have it that the screw heads tend to stick out to far and the roller hits them as the drawer goes in or out. Besides that they work fine.
Date published: 2013-04-30
  • y_2017, m_5, d_25, h_6
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_16
  • loc_, sid_202200630, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 93ms