Rated 4.1 out of 5 by 27
Rated 3.0 out of 5.0 by Bruce They work just fine
They do their job. I wish I knew if the weight limit were for the closed position or if that were for the leading edge at full open. (I'd really doubt the latter, but who knows?) It handles my 35# leading edge working load just fine. But I also put a roller in, just in case.
July 12, 2016
Rated 5.0 out of 5.0 by JF This will become my standard drawer slide
There is nothing fancy about these slides, all they do is work as described, and that they do very well.
I just finished a 4- drawer utility cabinet with the 18 inch slides yesterday, and I'm looking forward to the 7-drawer-12-inch project that's on my list for today.
Just follow the (very simple) instructions. These slides almost extend full length, are self-closing and run smoothly, for a fraction of the costs of telescoping slides.
They are also really easy to install: If you build a cabinet, you can install the halves that go on the side walls first, before assembling the cabinet, while the work piece iis still flat on your workbench. Same for the halves that go on the drawers - mount them on your workbench, and then just slide the drawer into the cabinet..
July 7, 2016
Rated 4.0 out of 5.0 by HandymanC Good product
The only thing that can be improved upon is better guidance for selecting the proper length. I was unsure what the actual size would be for my situation. I probably could have used the next size, but made these work.
May 10, 2016
Rated 5.0 out of 5.0 by RealPersonJacob Excellent (IF YOU INSTALL CORRECTLY)
These will make your drawer slide gently and freely like air! BUT, only if you install it correctly, meaning make sure you them exactly lined up, and make sure they are level. Our house came with these on all the drawers, and many of our drawers have problems because whomever installed them did a bad job, not because of the rails. MAKE SURE THE rails ARE LEVEL and have the appropriate amount of space between themselves and the drawer/wall (or mounting stud), and they will work PERFECTLY like an expensive set of steel ball bearing slides for a fraction of the cost. Of course, I built my own drawers and the rails I mounted them on, so I was easily able to adjust those factors. I turned some fake drawers into real drawers in my kitchen using these rails. I would recommend these rails (just make it a perfect fit and also level and your drawer and it will glide perfectly using these rails)
January 29, 2014
Rated 5.0 out of 5.0 by 1111 match
matched an existing one that was broken xxxxxxxxxxxx
January 5, 2016
Rated 5.0 out of 5.0 by Pepi Good cheap product that works
My son's computer desk had a fancier system with ball bearings. The grease made a mess when it broke.
This is easier, cleaner and actually feels stronger. Have the same on my desk and it's been working fine for 15 years.
Screws seem a little iffy, but with drilling a pilot hole first, seem to hold fine.
December 7, 2015
Rated 4.0 out of 5.0 by Homeowner Trash bin drawer
The slides work well when installed and were easy to implement. I had no problems.
December 15, 2015
Rated 5.0 out of 5.0 by Userlevel6 good basic drawer slides
Easy enough to install with a level, pencil, and electric screwdriver. Just mount the rails on the drawer and follow the instructions for mounting the front of the slides to the opening. You can then slide in the drawer while supporting the back of the drawer and rails, level, mark the holes, remove the drawer and mount the backs. Economical and solid, but be careful not to strip the tiny philips head mounting screws.
June 20, 2012