Model # P30046C-SN-E2

Internet #100115774

Store SKU #134483

Store SO SKU #1000668482

Liberty 3 in. Satin Nickel Raised Oval Cabinet Knob Backplate
0885785148693

Liberty

3 in. Satin Nickel Raised Oval Cabinet Knob Backplate

  • Decorative oval backplate with satin nickel finish
  • Installs behind a cabinet knob
  • Cover existing holes or simply add an elegant accent
$1.69 /each

Frequently Bought Together

Product Overview

Cover an existing hole when mounting a new kitchen cabinet knob with the Liberty 3 in. Raised Oval Backplate Knob. This high-quality die cast zinc backplate features a satin nickel finish and a traditional design. Rear mount installation.

  • Covers existing holes to mount a new knob
  • High quality die-cast zinc base
  • Satin nickel finish
  • Traditional design

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

6 Questions15 Answers

Customer Questions & Answers

3 in. Satin Nickel Raised Oval Cabinet Knob Backplate
3 in. Satin Nickel Raised Oval Cabinet Knob Backplate

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
 
4 answers

is this backplate raised in the middle or is it flat.

This question is from 3 in. Satin Nickel Raised Oval Cabinet Knob Backplate
Asked by
JAM
Avon
July 20, 2012
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (4)

Asked by
Windsor, CA
Read all my Q&A
Home Improvement Profile: DIYer
June 15, 2016
Answer: 
It is flat.
User submitted photo
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0

Asked by
Akron, OH, USA
Read all my Q&A
December 20, 2012
Answer: 
Slightly raised.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Richardson, TX
Read all my Q&A
September 9, 2012
Answer: 
This backplate is pretty flat.
0points
1out of 2found this answer helpful.
Was this helpful?helpful1unhelpful1

July 20, 2012
Answer: 
Flat
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
 
3 answers

I need to know the height & width of the backplate as you look at it on a drawer. Thank you. Carol

This question is from 3 in. Satin Nickel Raised Oval Cabinet Knob Backplate
Asked by
Read all my Q&A
May 30, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (3)

Asked by
Windsor, CA
Read all my Q&A
Home Improvement Profile: DIYer
June 15, 2016
Answer: 
3/16" high X 1" x3"
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

June 2, 2016
Answer: 
Dimensions
Product Depth (in.)
4.3
Product Width (in.)
3
Product Height (in.)
0.1
-1point
0out of 1found this answer helpful.
Was this helpful?helpful0unhelpful1

May 31, 2016
Answer: 
The dimensions of the backplate are:
Depth (in.)
4.3
Width (in.)
3
Height (in.)
0.1
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
 
3 answers

Will this cover 3" center to center holes?

This question is from 3 in. Satin Nickel Raised Oval Cabinet Knob Backplate
Asked by
ladylinen
USA
August 3, 2012
I want to use these to cover 3" drawers holes. Will this work?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (3)

Asked by
Fort Wayne, IN
Read all my Q&A
Home Improvement Profile: Other
December 21, 2015
Answer: 
NO! I bought these with the intention of covering 3" on center holes and they DO NOT! They are exactly 3 inches from tip to tip and that does not allow for covering the holes.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
Akron, OH, USA
Read all my Q&A
December 20, 2012
Answer: 
Yes, I used this backplate to cover 3-inch drawer holes. The tough part is keeping the backplate straight while you're attaching it. I recommend two people for this project - one to make sure the plate stays straight.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

August 3, 2012
Answer: 
It should. The length of this backplate is exactly 3".
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
2 answers

I need the actual full length measurement?

This question is from 3 in. Satin Nickel Raised Oval Cabinet Knob Backplate
Asked by
Virginia
Read all my Q&A
April 7, 2016
According to Liberty's website these are 3" center to center. If true, then two screws will go in from back of plate and center screw goes in hole in front as pictured. This would make the actual length slightly longer than 3 inches. I need to cover up old existing 3 inch center to center holes, so I'm hoping the outside length is closer to being 3 3/4 to 4 inches longer. Any answers are appreciated! Thanks!
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
Windsor, CA
Read all my Q&A
Home Improvement Profile: DIYer
June 15, 2016
Answer: 
3"
User submitted photo
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

April 12, 2016
Answer: 
Thank you for your interest in our product. This back plate is 3" over all size with only one hole for a pull. We do apologize for your inconvenience. Kind Regards, emccollum
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
2 »
  • 2016-10-30 T23:10:14.603-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_100115774, prod, sort_default
2 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 72ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 4.9 out of 5 by 14 reviewers.
Rated 5.0 out of 5.0 by Beautiful These are just perfect to "beef" up the small knobs on my gigantic wall of cabinets. June 15, 2016
Rated 5.0 out of 5.0 by Great backplates! These look great with the Liberty crystal knobs we bought! January 26, 2016
Rated 5.0 out of 5.0 by Nice Addition to the Cabinets We had planned to change out our old kitchen cabinets for new ones but with the cost of other updates and the great shape the old cabinets were in, we decided to try replacing the hardware first. Glad we did! These backplates along with the new knobs that matched perfectly (and available in-store) added a whole new look to the kitchen. Perfect match for stainless steel appliances too. Easy to install and look great. November 3, 2015
Rated 5.0 out of 5.0 by Looks good Previous owner had drilled an extra hole in each cabinet, so we had to get the backplates. Looks like brushed nickel and goes well with the knobs we selected, also from Home Depot. Very easy and quick to install. Husband used his own phillips head screws. September 1, 2015
Rated 5.0 out of 5.0 by Best what you can get Good design and quality for very reasonable price. July 28, 2015
Rated 5.0 out of 5.0 by Good Quality and a Nice Finish I searched high and low for these and was happy to be able to order then to be shipped to my local store. They have a nice, satin finish, are not flimsy at all and are exactly what I was looking for. They match my knobs perfectly. Thank you, Home Depot! November 11, 2014
Rated 5.0 out of 5.0 by Great purchase Product looks great. Updates my kitchen and came promptly. August 13, 2014
Rated 5.0 out of 5.0 by Quality Product. I replaced the grab handles on our kitchen drawers to satin nickel knobs with matching backplates to cover the holes in the drawer fronts. These backplates are not flimsy, but are made of heavy guage metal. Very satisfied with the purchase. September 13, 2011
  • 2016-10-30 T21:22:51.922-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_14, tr_14
  • loc_en_US, sid_100115774, prod, sort_default
2 >>
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 38ms
  • REVIEWS, PRODUCT