Rated 4.4 out of 5 by 35
Rated 4.0 out of 5.0 by James My experience with Liberty Mission style bail pulls
We had our Kitchen cabinets made into a craftsman design and this hardware was an affordable alternative to the more expensive hardware. I installed them over a year ago and they still look as great as the day I installed them. The only thing wrong with them is the mfg. didn't include a 3/4" screw and I had to place them in a vice with a nut over the screw, cut it off and thread the nut off the screw to rethread it. Please include the additional size.
April 10, 2013
Rated 5.0 out of 5.0 by Jeff Great design to fit arts & crafts style
These handles look great, just like the ones we had been seeing in restoration magazines. Even though this was new construction we still wanted to obtain the arts & crafts look.
I really liked the fact that the threaded part of the handles recessed into the doors. By doing so the handles stay firmly in place, even if the screw were to loosen a little. This required more drilling; drilling a hole all the way through the door for the screw and then with a larger drill bit countersinking to receive the handle itself. More work, but love the result.
The only negative that I ran into was, even though there were two lengths of screws in the package, neither were 3/4 inch, the length required for a 3/4 inch thick door. I had to cut down the screws to length.
October 3, 2012
Rated 5.0 out of 5.0 by Julie Perfect for my rustic home
These are perfect for our custom log-style home. They are good quality and you can't beat the price!
July 1, 2015
Rated 4.0 out of 5.0 by dqubed Love the look of these handles!
Only reason not a 5 all the way around is because the holes don't line up with standard spacers. Otherwise they are fabulous!
May 27, 2015
Rated 3.0 out of 5.0 by LaVergne No template provided; screws are too short/long
I love the look and feel of these pulls, but just like other reviewers, there is no template provided for these. They are longer than the average pull, so they did not fit into the current cabinet holes. Also, the website states that screws are NOT included, so I ordered them. When my order arrived, each pull comes with 2 different screw sizes. Unfortunately, one size is too short and the other was too long requiring them to be cut off. These turned out to be a bit more of a hassle than they should be. The website needs to be updated to state that they DO include the screws.
February 11, 2014
Rated 3.0 out of 5.0 by Handycouple Good for moderate use cabinets
The pulls are middle of the road in regard to quality, they feel like they might break if they were subjected to heavy usage. They are very attractive in their styling and look great on our oak entertainment cabinet for the price.
The on-line description says, 'Requires #8-32 x 1 in. machine screws (sold separately)', but most other cabinet pulls include the screw, so we ignored it. As predicted, they were packaged with the screws, but unfortunately, each came with a 2 inch screw that was way too long. We ended up having to buy a bag of shorter screws.
April 24, 2012
Rated 4.0 out of 5.0 by Gustav1 Price is unbelievably low
Has the look of hardware that is 20 times the price, but there are some shortcomings... Be careful in measuring your on center when drilling pilot holes. Some of the backplates have a barely noticeable curve or bend to them yet when measured space at 4.25 " If you drill your hole 1/8 inch higher for the curved backplate allowance when applicable you should be OK. At least that was the case with 2 of the 4 I received when I mounted them. They look like original hardware on my glass front red oak built ins next to the fireplace
June 11, 2013
Rated 5.0 out of 5.0 by LEWG100 FANTASTIC W/ A WEE BIT OF WORK !!
I SAW THESE IRON BLACK METAL MISSION STYLE PULLS (BOTH THE VERTICAL & HORIZONTAL) ON ANOTHER "SPECIALTY" WEBSITE FOR $13.25 ea ! WHEN I SAW THEM ON HOME DEPOT.COM for $2.20 ea I PUT THEM INTO MY CART RIGHT AWAY. THEY ARRIVED IN 10 DAYS. MY HUSBAND & I THOUGHT ABOUT BUYING A NEW HUTCH TO MATCH OUR NEW MISSION STYLE SLAT BACK CHAIRS, HOWEVER, I THOUGHT TO SIMPLY REPLACE THE HARDWARE & REPAINT THE METAL ON THE BEVELED GLASS. THIS PULL IS VERY STURDY, GOOD LOOKING, & COMES W/ SCREWS. DEPENDING ON YOUR PREVIOUS HARDWARE HOLES, YOU MAY HAVE TO DRILL NEW HOLES & CUT OR USE WASHERS W/ THE SUPPLIED SCREWS TO HAVE THE HARDWARE TIGHTEN DOWN. IT TOOK US 3 HOURS TOTAL TO DRILL NEW HOLES, ADD WASHERS, & APPLY 8 NEW PULLS. WE LOVE, LOVE THE NEW LOOK !....AND ALL FOR $24 !!! THANK YOU HOME DEPOT..............WE WILL BE BACK FOR MATERIALS FOR OTHER RENOVATIONS !!
July 13, 2014