0081483010731

Lifetime

Model # 60075

Internet # 202956726

8 ft. x 15 ft. Storage Shed

$1,599.99 /each

Frequently Bought Together

Product Overview

The Lifetime 8 ft. x 15 ft. Outdoor Storage Shed features 5 small skylights, 2 shatter proof polycarbonate windows, 2 screened vents, 1 90 in. x 9 in. shelf, 2 30 in. x 10 in. shelves, 2 corner shelves, and a 10-year limited warranty. This shed consists of model 6402 and a 6422 extension kit. Floor and installation hardware included. Comes in 3 boxes. 108.75 sq. ft. (749 cu. ft.).

  • Double-wall, high-density polyethylene (HDPE) panels with steel wall supports for added strength
  • Steep angle allows for the quick drainage of rain and snow, and provides a spacious, walk-around interior, heavy-duty steel trusses increase strength
  • Steel-reinforced doors provide an extra-large opening, sturdy structure, and exterior padlock loop
  • Oil, stain and slip-resistant floor surface does not crack, chip, or peel
  • Screened vents provide airflow and keep pests out
  • UV-protected to help prevent fading and cracking, stain-resistant exterior never needs painting
  • High-impact polycarbonate skylights help illuminate interior
  • Windows open for increased air circulation and securely lock
  • Skylights included
  • All necessary hardware included

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Approximate Depth (ft.) 
15 
Approximate Width (ft.) 
Assembled Depth (in.) 
178 in 
Assembled Height (in.) 
96 in 
Assembled Width (in.) 
94 in 
Door Opening Height (In.) 
76 
Door Opening Width (In.) 
56 
Door Opening Width (ft.) 
Exact Width x Depth 
7 ft 10 in x 14 ft 10 in 
Sidewall Height (in.) 
70 

Details

Assembly Required 
Yes 
Color Family 
Browns / Tans 
Floor Options 
With Floor 
Maximum Roof Load (lb./ sq. ft.) 
3312 
Maximum Wind Resistance (mph) 
65 
Number of Doors 
Number of Windows 
Product Weight (lb.) 
697 lb 
Returnable 
90-Day 
Roof Color Family 
Gray 
Roof Pitch 
6:12 
Shed Door Type 
Double 
Shed Features 
Door Latch,Lockable Door,Shelving,Vents,Windows 
Siding Color Family 
White 
Storage Capacity (cu. ft.) 
749 

Warranty / Certifications

Manufacturer Warranty 
10-Year Limited Warranty 

More Products With These Features

Search

Customer Questions & Answers

38 Questions84 Answers

Customer Questions & Answers

8 ft. x 15 ft. Storage Shed
8 ft. x 15 ft. Storage Shed

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
This question is from 8 ft. x 15 ft. Storage Shed
 
5 answers

Can the doors and windows be in the back rather than the ends? Then, can a slit opening be cut in the front almost the length of the shed?h

This question is from 8 ft. x 15 ft. Storage Shed
Asked by
Doc
Clearwater, Fl.
July 16, 2013
Clearwater Audubon is planing to build a bird blind and your product,if adaptable,might be just what we are looking for. If this can be made we could show pictures of the blind at various ornithological meetings here in Florida.
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (5)

Asked by
Spring, TX, USA
Read all my Q&A
September 7, 2013
Answer: 
The door can only be installed in front or back, but the windows can be installed in the back and anywhere on either side wall. All the vertical panels are the same size. if it is installed in the back the shelves will be in front of the window.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
Virginia Beach
Read all my Q&A
July 17, 2013
Answer: 
No you can move the windows on the side from front to the back the door has to go on the end
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
ct.
Read all my Q&A
July 16, 2013
Answer: 
The window panels can be placed in various locations along the 15' span but not on the 8' ends. The door location must be on an 8' end. Not quite sure what you mean about a slit opening.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Norman, OK, USA
Read all my Q&A
July 16, 2013
Answer: 
No, they can be adjusted on the sides, 1 on each, 2 on the same, moved up or down the length of the unit but not on the ends of unit, different panels. i would not advise cutting slits without some kind of reinforcement, however, cutting peepholes with a hole saw would be ok strength wise.
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0

July 16, 2013
Answer: 
For shed customization questions you will need to contact our customer service department to see what your options are. They can be reached at 1 800 225 3865 or email customercare@lifetime.com.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
This question is from 8 ft. x 15 ft. Storage Shed
 
4 answers

can you mount this on a wood floor.

This question is from 8 ft. x 15 ft. Storage Shed
Asked by
pavo, Georga
Read all my Q&A
June 21, 2014
if i build a wood floor with 2x4s and 3/4'' plywood set on 4x4 runners, can I mount the building to this.
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (4)

Asked by
McKinney, Tx
Read all my Q&A
June 24, 2014
Answer: 
Yes no problem. We just happen to mount it to a cement slab. The wood floor would work just as well.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
Utah
Read all my Q&A
June 23, 2014
Answer: 
This shed must be built on a flat level foundation of wood or concrete (not included). It is designed with a slight indentation in each corner of the floor so that you can drill through the flooring to secure it to the foundation. Anchoring hardware depends on the type of foundation you have and is therefore not included in the shed kit. Not including the installation of the foundation, you can expect Read More
This shed must be built on a flat level foundation of wood or concrete (not included). It is designed with a slight indentation in each corner of the floor so that you can drill through the flooring to secure it to the foundation. Anchoring hardware depends on the type of foundation you have and is therefore not included in the shed kit. Not including the installation of the foundation, you can expect assembly of the shed itself to take 2 adults up to 6 hours. Read Less
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0

Asked by
Colorado
Read all my Q&A
June 22, 2014
Answer: 
yes just make sure the floor is level. I also added a small ramp at the door to pull in my lawnmower, etc.
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0

Asked by
Colorado
Read all my Q&A
June 22, 2014
Answer: 
Yes, I built my base with a 2x4 frame and 3/4 plywood. Once the shed is built on top of it, you can screw through the floor to hold it in place. The shed comes with the screws for this.
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0
This question is from 8 ft. x 15 ft. Storage Shed
 
4 answers

Actually if the door is on the end I would be erecting on side against a brick wall. Is this do able?

This question is from 8 ft. x 15 ft. Storage Shed
Asked by
needs to know
Colorado
September 7, 2013
Sorry to not have looked at the picture better before I asked my question
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (4)

Asked by
ct.
Read all my Q&A
September 8, 2013
Answer: 
If your asking, can you install door on the side of shed instead of the end, you can't.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Spring, TX, USA
Read all my Q&A
September 7, 2013
Answer: 
If I understand you correctly you want to install the shed with one of the sides against the wall.The roof overhang is about 2 inches about 6 ft off of the ground but it will not interfere if you have 3 inches from the shed to the wall. Also note that the bottom panel extends about an inch around the building. The only other concern is getting the roof panels down so they can be screwed down, but you can Read More
If I understand you correctly you want to install the shed with one of the sides against the wall.The roof overhang is about 2 inches about 6 ft off of the ground but it will not interfere if you have 3 inches from the shed to the wall. Also note that the bottom panel extends about an inch around the building. The only other concern is getting the roof panels down so they can be screwed down, but you can probably use a small step stool and install them from the inside. Also you can install the window panels anywhere on the building except the front. All the side and back panels are the same. Read Less
User submitted photo
User submitted photo
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0

Asked by
Virginia Beach
Read all my Q&A
September 7, 2013
Answer: 
The door can be put on either end but they do go only go on the end in this model , they have other models that the door is in the middle hope this answer your question .
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Charleroi, PA 15022, USA
Read all my Q&A
September 7, 2013
Answer: 
Yes, same results as back. But I would suggest putting both window walls on the outside. This is an option and will allow for more light.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
This question is from 8 ft. x 15 ft. Storage Shed
 
4 answers

Can this be built against a solid brick wall?

This question is from 8 ft. x 15 ft. Storage Shed
Asked by
needs to know
September 7, 2013
I need to be able to have the back of this against or no more than about 3 " from a solid brick wall. Can the back be put together and then stood up in place without access to the back side?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (4)

Asked by
ct.
Read all my Q&A
September 8, 2013
Answer: 
You do need to be on the outside to snap wall panels to the floor, however, you should be able to install the back panels with the floor away from your brick wall then slide floor into position.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Spring, TX, USA
Read all my Q&A
September 7, 2013
Answer: 
I think you will be fine putting it against a wall.The back is installed by putting the panels into the bottom panel. It requires a nominal amount of down force which can be aided by a soft hammer and board to avoid damage to the panels. The top panel is dropped in and installed from inside the building similar to the front upper panel. Everything is done from the inside. Start installing the vertical Read More
I think you will be fine putting it against a wall.The back is installed by putting the panels into the bottom panel. It requires a nominal amount of down force which can be aided by a soft hammer and board to avoid damage to the panels. The top panel is dropped in and installed from inside the building similar to the front upper panel. Everything is done from the inside. Start installing the vertical panels from the back and work your way forward. Note, be careful when you assemble the roof supports to install the nuts in the correct orientation. and don't forget the cross braces under the roof panels. (experience) the roof panels do need someone outside to push them down from the sides into position . Read Less
User submitted photo
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Virginia Beach
Read all my Q&A
September 7, 2013
Answer: 
No but you can get help and slide the thing over in place after you have the walls up they lock into the floor panels and you must have the room to lock them together .
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Charleroi, PA 15022, USA
Read all my Q&A
September 7, 2013
Answer: 
There is an eave that is about 1 1/2". This would prevent it from being completely against the wall but within your 3". Yes you should be able assemble and put in place. Once built you would not need to get to the back for anything other than power washing.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
2 3 »
  • 2016-07-22 T14:44:23.427-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_202956726, prod, sort_default
2 3 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 93ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 4.2 out of 5 by 38 reviewers.
Rated 4.0 out of 5.0 by great shed! good value for the money. it took 2 people 7 hours to put together. went together fairly easily - we used motorcycle straps to hold up one side of the wall and one end while the other walls were being put together, worked great. hubby built a 10x20 platform out of 2x12s and 2x6 floor joists and 5/8" plywood decking so we had a solid foundation. only problem we had was the doors won't latch and lock together - no matter how hard we tried. having to resort to a hasp and staple attachment to the door to be able to lock it. June 14, 2016
Rated 5.0 out of 5.0 by Great Shed Great shed for the price. You definitely need two people to assemble this shed. It took a little longer than I anticipated when assembled the wall (not as easy). But overall...great PRODUCT....just as advertised. June 21, 2016
Rated 5.0 out of 5.0 by tough I bought mine in 2007. it is placed on a flat surface of gravel. The roof is still keeping dry. The snow weight over the years reformed the roof a bit, but still holding. The door latch broke after a few years. Then recently the door hinge and the door dead bolt. I called and it is still under warranty. They are sending the parts free. March 29, 2016
Rated 5.0 out of 5.0 by Great Shed! High quality shed, easy to assemble and rugged. Love this shed! April 10, 2016
Rated 4.0 out of 5.0 by Very good shed for what I needed. Has lots of room for storage. Not the best for hanging heavy lawn tools, like a weed eater. Needs at least 2 persons who know what they are doing to put it together. Needs a level surface or the doors don't hang correctly. April 5, 2016
Rated 4.0 out of 5.0 by Great Product, real good material. Real good product, the material is of real good quality, and it was easy to assemble. February 23, 2016
Rated 5.0 out of 5.0 by Great quality, value, and ease of setup - Great Product! Unfortunately the prior owners of my house left a 'death pit' on the side of the house with no use I could think of. Decided a shed would do the trick, and after a lot of research decided this shed would fit the area and be of great use. Took 3 guys a little over 4 hours to complete the whole install including caulking around all the bottom edges. Add a couple hours to build the frame. Can't say enough how happy I am with this shed, and how much more sturdy is than I originally thought. Definitely would recommend this anyone. June 17, 2014
Rated 5.0 out of 5.0 by Excellent Shed I ended up assembling this shed by all by myself in about 12 hours over two days on a concrete slab. And amazingly everything fit and worked flawlessly. The doors were a little tricky to install by myself, but a few clamps fixed this for a third hand. Way better than the two metal sheds I have put up before (with two people). Highly recommended. October 30, 2013
  • 2016-07-22 T14:53:41.746-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_38, tr_38
  • loc_en_US, sid_202956726, prod, sort_default
2 >>
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 42ms
  • REVIEWS, PRODUCT