Model # K664-2

Internet #100595265

Store SO SKU #117341

Lincoln Electric Aluminum Feeding Kit

Lincoln Electric

Aluminum Feeding Kit

$7600 /each

Frequently Bought Together

Product Overview

With this Lincoln Electric Aluminum Feeding Kit you can use .035 aluminum wire with a MIG welder. The kit is designed for use with a variety of Lincoln Electric welders. The kit includes a non-metallic cable liner and an aluminum wire spool.

  • Enables you to weld with aluminum wire using your MIG welder
  • For use with Lincoln Electric welders such as Weld-Pak 100, Weld-Pak 155, Pro-Core 100, Pro 100, Weld-Pak 3200HD, Weld-Pak 5000HD, SP-135T, SP-175T and others
  • You'll be stackin dimes in no time with the K664-2 aluminum feeding kit
  • Includes .035 drive roll, 6 contact tips, a liner, guide tubes, and 1 lb. spool of SuperGlaze 4043 0.035 aluminum MIG wire

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.




More Products With These Features


Customer Questions & Answers

will this fit my weld pak 125hd?

i bought this as the homedepo website list my weldpak 125HD to work with this kit. the instructions are showing a different drive unit? the roller seem to be smaller than what is inplace already so im abit confused. is there a way to use this? will even the gun liner fit or am i out 85$? thanks for the replys back
Asked by: Jimmy
This was a reply from lincoln: The WP125 with the gas kit installed uses a spool gun, K3269-1 to weld aluminum. It does not use the older K664-2 feeding kit. Don't do what I did and wast 90$ because your welder is listed to work on homedepot website and sold as so.
Answered by: Jimmy
Date published: 2015-11-07

Will this work with my Pro-MIG 135 ?

Asked by: Madreup
Yes it should, but you may be limited on thickness of metal welding due to the lower amperage rate. You will have to convert to argon gas to weld with the aluminum wire.
Answered by: HarleyRyder
Date published: 2017-01-22

Will this work with 140 hd

Asked by: Anonymous
For the 140 you can get a spool gun that plugs right in . On ebay for around 200 . Yes I think this kit will work on 140 machine all it is is Teflon Liner and new roller .
Answered by: Lpro
Date published: 2016-09-27

Would this work on a 100 HD weld pack Lincoln

Asked by: dave
Yes it will.
Answered by: WeldingExperts
Date published: 2017-06-05
  • y_2017, m_6, d_23, h_11CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_26
  • loc_, sid_100595265, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 96ms

Customer Reviews

Aluminum Feeding Kit is rated 3.2 out of 5 by 22.
Rated 5 out of 5 by from Lincoln aluminum wire feed I was pleased at how well the aluminum fed. Had now issues at all. Took about 20 minutes or so the first time to set it all up, but I believe that time will be cut in half the next time I use it.
Date published: 2017-03-14
Rated 3 out of 5 by from This kit was delivered on time and in good condition. It worked as advertised but I feel (as I d... This kit was delivered on time and in good condition. It worked as advertised but I feel (as I did when I purchased it) that the price was too high.
Date published: 2017-02-22
Rated 1 out of 5 by from Easy to install, but incredibly difficult to feed wire. Became... Easy to install, but incredibly difficult to feed wire. Became jammed everytime used. Returned item, bought spoon gun instead.
Date published: 2017-02-28
Rated 5 out of 5 by from Straight forward installation and feeds the wire without birdnesting now... Straight forward installation and feeds the wire without birdnesting now I just need to do my part to get the weld right!
Date published: 2017-04-12
Rated 3 out of 5 by from I installed one of these kits on my Pro-Mig 175 to try my hand at welding aluminum. I've been wel... I installed one of these kits on my Pro-Mig 175 to try my hand at welding aluminum. I've been welding steel for many years. This kit was easy to install, and since you're using the same gun, it has the same familiar feel as welding steel, so that's a plus. In the beginning it took a little time to get the settings right, temp, speed etc, but within an hour I was running beads on some 3/16 inch and 1/8 inch aluminum plate without any difficulties. I felt pretty confident with my welds and they way they were coming out. First, I ran a few beads on flat stock to get the feel. Then I tried several samples at different settings on lap joints, corner joints, butt joints, etc. all with great results. Confidence was building and then it happened, the dreaded "bird nest" at the roller as the wire enters the sleeve. I tried everything I could to rectify the problem. I reset the roller and pressure, checked and cleaned the liner, tip, and diffuser to see if anything was causing an obstruction. I started in again it would weld for a minute or two then bird nest again. I made sure the cable and liner was straight when welding, I tried the various speeds I had experimented with. I even chamfered the back side of the contact tip smoother and moved the outer jacket as close to the rollers as possible to help eliminate any open space from the rollers to the feeder/liner. It came with the same results, would work for a few minutes then bird nest. I finally gave up and put it away thinking I would tackle it another day. I was not going to give up because I am certain that once I figure out why its doing the bird nest thing, it will be back to welding as it was when I first started. The welds looked great and when they were cleaned up they looked just a good as any steel weld I've done over the years. UPDATE: Soon after my experience with this kit, I got to use a neighbors spool gun setup and I was hooked! I'm not going to try and make this kit work. Instead I am going to get a spool gun and go that route. It is more expensive, but the simplicity of the spool gun was well worth it. If it hadn't been for the spool gun experience, I would still be working on making the Aluminum Feeding Kit work to my expectations.
Date published: 2017-01-22
Rated 5 out of 5 by from Good product Fast shipping This kit is good for new or beginner welders . Takes 20 min to set up . I use 5356 wire .30 stiffer for small dia. No issues . Good apperence . Med strengh with my machine only weldpak 100 . 100 percent Argon and c 9 setting welding 3/16 - 1/4 material . Tested in vise it passed welds did not break and bent parent material .
Date published: 2013-03-19
Rated 5 out of 5 by from Great Aluminum Feeding Kit Not hard to install, had a little trouble with the non-metallic cable liner making the bend at the handle. After the install, it took me a few days to get the hang of it, but it all changed when I exchanged the gas to 100% Argon. Over all I would recommend this kit over any other expensive kit, unless you plan to do a lot of aluminum welding. This kit was installed on a Weld Pack 100 Purchased at Home Depot around 10 years ago, and this welder is now even more versatile with this Aluminum Feeding Kit.
Date published: 2011-11-23
Rated 5 out of 5 by from DO NOT WELD ALUMINUM WITHOUT THIS KIT I have been using my welder like a mig for steel on aluminum and it has been very difficult. With the steel set up, aluminum will bunch up at the feeding wheels and you will have to cut and pull out the mess then pull the wire from the cable. The kit is a huge time saver and also saves lots of wire from being wasted. The kit does seem very expensive for just a liner, wheel, few tips and an extra roll of wire, but try welding aluminum without it and you will be back on here hitting the check-out button. This kit will make your little welder weld just as good as a spool gun without the weight of holding up the spool gun and getting it to tight places.
Date published: 2014-05-20
  • y_2017, m_6, d_23, h_24
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_22
  • loc_, sid_100595265, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 108ms