Liquid Nails 10-oz. Paneling and Molding Construction Adhesive-LN-606 at The Home Depot

Liquid Nails

Model # LN-606

Internet # 100165601

Store SKU # 211334

10-oz. Paneling and Molding Construction Adhesive

Liquid Nails 10-oz. Paneling and Molding Construction Adhesive

This item has been discontinued.
The Home Depot no longer carries this specific product.

$3.67 / each


Model # LN-606

Internet # 100165601

Store SKU # 211334

The LIQUID NAILS 10 oz. Paneling and Molding Construction Adhesive has a strong waterproof impact resistant bond and a stain free guarantee that will help keep your project mess free.

California residents: seeProposition 65 information

  • Recommended for the interior bonding paneling, wainscoting, corkboard, MDF board, as well as, wood, foam and plastic molding
  • Advance adhesive technology
  • Set time of 10 minutes and a cure time of 24 hours
  • Waterproof and impact-resistant bond
  • Reduces nailing
  • 10 minute working time
  • Provides an impact-resistant bond.
  • Precision placement
  • Note: Product may vary by store.
  • Click Here to learn more about Liquid Nails Products

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.


Adhesion level  High  Adhesive Product Type  Construction Adhesive 
Assembled Depth (in.)  1.853 in  Assembled Height (in.)  11.264 in 
Assembled Width (in.)  1.853 in  Construction adhesive type  Specialty 
Curing time (hours)  24  Dries clear  No 
Drillable  No  Indoor/Outdoor  Indoor 
Manufacturer Warranty  Limited warranty  Moisture Resistant  Yes 
Paint Product Type  Construction Adhesives  Product Depth (in.)  1.853 
Product Height (in.)  11.264  Product Width (in.)  1.853 
Recommended surfaces  Woodwork  Sandable  Yes 
Solvent resistant  No  UV/sunlight resistant  No 


Rated 2.5 out of 5 by 2 reviewers.
Rated 3 out of 5 by Not great for foam crown molding Bought some of this to try after I ran out of Loctite PowerGrab for paneling while hanging some high density foam crown molding. It initially does not adhere very well to horizontal surfaces which made hanging the molding more difficult than it needed to be since I had to use nails to anchor the molding and hold it in place while the adhesive cured. It sets up rather quickly. The product label says it has a ten minute working time. That's being generous - it starts to set up in a few minutes at which point removing any excess with a sponge and water becomes difficult. It has a stronger odor than the Loctite adhesive...not bad, but not good, either. It dries brown (blech!) which means as much excess needs to be removed as quickly as possible. The Loctite is more forgiving: it dries clear. Overall, the Liquid Nails for paneling did its job, but there are other adhesives which are better suited to this type of molding. August 18, 2012
Rated 2 out of 5 by high VOC content Liquid Nails has a reputation for being the best adhesive available; well, it might be somewhat overrated at times. I used LN Paneling and Molding before - while it does the job well, it also has a strong odor. Consulting the technical datasheet reveals: LN contains a good amount of VOC (43 g/L) including Formaldehyde - stuff you certainly don't want yourself or your family exposed to. For this reason the product label clearly says USE ONLY WITH ADEQUATE VENTILATION. Having a toddler and an infant in the house, I was looking for a 'greener' alternative and opted for OSI GreenSeries F-38 Drywall & Panel Adhesive. It worked just as well for gluing molding to drywall as Liquid Nails does but it contains a lot less volatile chemicals (< 2 g/L). Liquid Nails might be a good choice for new construction; for projects in occupied structures I'd rather stay away from. March 10, 2014
1-2 of 2


Store Exclusive. This item is available for purchase in select stores only.