0784231602430

Lithonia Lighting

Model 1233 RE

Internet #202994372

Store SKU #565027

2-Light White T8 Fluorescent Residential Shop Light

$15.97 /each
  • 4-3/4 in. reflector
  • 5 ft. power cord
  • Requires two 32-Watt T8 fluorescent bulbs (sold separately)

Frequently Bought Together

Product Overview

The 2-Light White T8 Fluorescent Residential Shop Light from Lithonia Lighting is an economical and Energy efficient task and general purpose lighting solution for work and storage areas. It comes fully assembled and ready to install. This fixture also comes with a 5 ft. power cord so no wiring is required.

  • Energy efficient T8 fluorescent technology
  • 4-3/4 in. reflector
  • 5 ft. power cord
  • Requires two 32-Watt T8 fluorescent bulbs (sold separately)
  • CUL listed to US and Canadian safety standards
  • Mount suspended from ceiling using the included mounting chains
  • Mounting hardware included

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

28 Questions100 Answers

Customer Questions & Answers

2-Light White T8 Fluorescent Residential Shop Light
2-Light White T8 Fluorescent Residential Shop Light

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
This question is from 2-Light White T8 Fluorescent Residential Shop Light
 
8 answers

Can this fixture be wired as opposed to using the plug/cord?

This question is from 2-Light White T8 Fluorescent Residential Shop Light
Asked by
McMurray, PA
Read all my Q&A
August 18, 2014
I have my present light wired in from romex. Hoping I can do the same with these as I have no where to plug it. Thank you
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (8)

Asked by
whitehall, ny
Read all my Q&A
January 17, 2016
Answer: 
You can hard wire it if thats what you want, however, its just as easy to install an electrical box on the ceiling and just plug it in. That way its also easier to move if/when it quits and you need to replace it. I wired my tool shop with outlets on the ceiling knowing I was going to use this style lighting
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
NorCal
Read all my Q&A
Home Improvement Profile: DIYer
September 23, 2015
Answer: 
If you have a least minimal electrical experience, you can remove the cord and wire it with Romex. However, I personally prefer to run the Romex to a single gang box and install an outlet. That makes the installation much more flexible and easy to install, replace or relocate if needed down the road.
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0

Asked by
somewhere in the Mojave
Read all my Q&A
April 28, 2015
Answer: 
if you are confident doing basic wiring then yes.
0points
1out of 2found this answer helpful.
Was this helpful?helpful1unhelpful1

Asked by
Norwalk, CT
Read all my Q&A
February 4, 2015
Answer: 
yes
0points
1out of 2found this answer helpful.
Was this helpful?helpful1unhelpful1

Asked by
Norwalk, CT
Read all my Q&A
February 4, 2015
Answer: 
Yes, it is very easy
0points
1out of 2found this answer helpful.
Was this helpful?helpful1unhelpful1

Asked by
Dallas
Read all my Q&A
December 10, 2014
Answer: 
IT would require some dis assembly. I did not try to disassemble mine, so I am not sure how difficult it could be. I do not recall any punch outs for a wire connector. Since they are designed to handg from the ceiling rather than mount directly to it, the cord seems appropriate. You could cut the plug off the existing wire and connect directly. I would recommend using the existing cord and install a Read More
IT would require some dis assembly. I did not try to disassemble mine, so I am not sure how difficult it could be. I do not recall any punch outs for a wire connector. Since they are designed to handg from the ceiling rather than mount directly to it, the cord seems appropriate. You could cut the plug off the existing wire and connect directly. I would recommend using the existing cord and install a duplex outlet for easiest access and maintenance. Read Less
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
Texas, USA
Read all my Q&A
Home Improvement Profile: DIYer
August 25, 2014
Answer: 
This does not come with a direct wire option. Your best bet is to bring the romex to an electrical box you install in the ceiling with an outlet.
+3points
3out of 3found this answer helpful.
Was this helpful?helpful3unhelpful0

Asked by
Atlanta, GA
Read all my Q&A
Home Improvement Profile: Professional
August 20, 2014
Answer: 
Hi nards01,
I'm Travis from The Home Depot. Thanks for visiting our site.
Altering the electrical wiring on any light or appliance is discouraged by The Home Depot.
Yes, the plug-in cord can be cut and spliced, or removed and hardwired to the romex as it was on the previous fixture, but in doing so, you will void all warranty that exists for the light fixture and if wired incorrectly, could cause a Read More
Hi nards01,
I'm Travis from The Home Depot. Thanks for visiting our site.
Altering the electrical wiring on any light or appliance is discouraged by The Home Depot.
Yes, the plug-in cord can be cut and spliced, or removed and hardwired to the romex as it was on the previous fixture, but in doing so, you will void all warranty that exists for the light fixture and if wired incorrectly, could cause a fire hazard.
Make all electrical connections inside an approved junction box and adhere to all local codes that may apply in your area.
Thank you for asking,
-Travis Read Less
+3points
3out of 3found this answer helpful.
Was this helpful?helpful3unhelpful0
This question is from 2-Light White T8 Fluorescent Residential Shop Light
 
8 answers

How do you turn it on and off? Pull chain/cord?

This question is from 2-Light White T8 Fluorescent Residential Shop Light
Asked by
Bob
Woodland, CA
August 10, 2013
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (8)

Asked by
Lindsay, Ca
Read all my Q&A
Home Improvement Profile: DIYer
March 2, 2016
Answer: 
There is no switch, chain or cord. You have to pull the plug from the wall.
0points
1out of 2found this answer helpful.
Was this helpful?helpful1unhelpful1

Asked by
NorCal
Read all my Q&A
Home Improvement Profile: DIYer
September 23, 2015
Answer: 
This fixture has no on/off switch. You will have to switch the power to the outlet on and off.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Puerto Rico
Read all my Q&A
May 3, 2015
Answer: 
Pull cord.
-4points
0out of 4found this answer helpful.
Was this helpful?helpful0unhelpful4

Asked by
somewhere in the Mojave
Read all my Q&A
April 28, 2015
Answer: 
power cord is wired direct to fixture with NO inline switch
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
Norwalk, CT
Read all my Q&A
February 4, 2015
Answer: 
no switch, just plug it in
+3points
3out of 3found this answer helpful.
Was this helpful?helpful3unhelpful0

Asked by
Dallas
Read all my Q&A
December 10, 2014
Answer: 
The lights come with a 5 ft 3 prong AC cord. No switch. I wired the outlet to a wall switch.
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0

August 14, 2013
Answer: 
This fixture does not have an integrated switch. This light plugs into a standard outlet and the assumption is that the outlet is switched as opposed to the light itself. I have 4 of these in my shop, each plugged into their own outlet in the ceiling. All 4 outlets are on a single switch on my wall. By doing it this way, I can turn all 4 on and off at once.
+3points
3out of 3found this answer helpful.
Was this helpful?helpful3unhelpful0

August 13, 2013
Answer: 
This fixture comes equipped with a 5’ power cord to turn it on and off. Thanks for your question.
-2points
0out of 2found this answer helpful.
Was this helpful?helpful0unhelpful2
This question is from 2-Light White T8 Fluorescent Residential Shop Light
 
8 answers

Does this light come with a plug on the end of the power cord, or just bare wire?

This question is from 2-Light White T8 Fluorescent Residential Shop Light
Asked by
kenball1980
Lancaster, PA
May 3, 2013
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (8)

Asked by
NorCal
Read all my Q&A
Home Improvement Profile: DIYer
September 23, 2015
Answer: 
It comes with a standard 3-prong AC plug, ready to plug into an outlet.
+5points
5out of 5found this answer helpful.
Was this helpful?helpful5unhelpful0

Asked by
Puerto Rico
Read all my Q&A
May 3, 2015
Answer: 
2 prongs and no ground prong .Simple plug..
-3points
0out of 3found this answer helpful.
Was this helpful?helpful0unhelpful3

Asked by
somewhere in the Mojave
Read all my Q&A
April 28, 2015
Answer: 
comes with grounded 3 wire plug.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Norwalk, CT
Read all my Q&A
February 4, 2015
Answer: 
yes, 3 prong
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Dallas
Read all my Q&A
December 10, 2014
Answer: 
5 ft cord and 3 prong AC plug.
+4points
4out of 4found this answer helpful.
Was this helpful?helpful4unhelpful0

Asked by
Read all my Q&A
June 24, 2014
Answer: 
Comes with a plug.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

July 15, 2013
Answer: 
It comes with a 3 prong, 110v AC plug. This light will require a ground, so make sure you have a well wired outlet with a proper ground in it.
0points
1out of 2found this answer helpful.
Was this helpful?helpful1unhelpful1

May 7, 2013
Answer: 
The power cord does come with a plug on the end.
+1point
2out of 3found this answer helpful.
Was this helpful?helpful2unhelpful1
This question is from 2-Light White T8 Fluorescent Residential Shop Light
 
8 answers

Lithonia Lighting 2-Light White T8 Fluorescent Residential Shop Light Model # 1233 RE Store SKU # 565027

This question is from 2-Light White T8 Fluorescent Residential Shop Light
Asked by
Jim
Houston
December 3, 2012
the description says depth 48 in assembled width 16 in...the picture shows what looks to be a fixture that is about 5 inches wide which uses 2 ea 48" T8 bulbs. I'm looking, for a fixture that takes 2 ea 48" T8 bulbs

Store SKU # 565027
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (8)

Asked by
85,000 acre marsh, CA
Read all my Q&A
Home Improvement Profile: Professional
January 16, 2016
Answer: 
Baldy (and others) asked the difference between T8 And T12 tubes. Think in octavos - that is 1/8ths. So then T8 = 8 eighths or 1 inch, while T12 = 12 eighths, yes, 1-1/2" pretty basic once you know the lingo.
+3points
3out of 3found this answer helpful.
Was this helpful?helpful3unhelpful0

Asked by
somewhere in the Mojave
Read all my Q&A
Home Improvement Profile: DIYer
July 30, 2015
Answer: 
this fixture usses 2 48" T8 bulbs
+3points
3out of 3found this answer helpful.
Was this helpful?helpful3unhelpful0

Asked by
Riverside, Ca
Read all my Q&A
Home Improvement Profile: DIYer
February 10, 2015
Answer: 
what is the difference between a T8 and T12 bulbs
0points
6out of 12found this answer helpful.
Was this helpful?helpful6unhelpful6

Asked by
Norwalk, CT
Read all my Q&A
February 4, 2015
Answer: 
Does take T8s. It is about 48"x4". minimal hood size. Hood doesn't even come below the bulbs but light does work well.
+3points
3out of 3found this answer helpful.
Was this helpful?helpful3unhelpful0

Asked by
Dallas
Read all my Q&A
December 10, 2014
Answer: 
This takes 2 T8 bulbs.
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0

July 15, 2013
Answer: 
It's 48ish inches long and about 4.5 inches wide. I think that the 16 inch number is the height from the reflector to the ceiling when it's hanging from it's chains. This light takes 2ea T8 48" bulbs.
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0

Asked by
Maine, USA
Read all my Q&A
April 9, 2013
Answer: 
The fixture is 5" wide has 2 T8 48"bulbs
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

December 4, 2012
Answer: 
The width dimension for this fixture is a misprint. The product has the dimensions as suggested by the photo so please disregard the printed width dimension. This is the correct fixture that you are looking for. Thank you for pointing out this misprint to us.
Thank you!
+3points
3out of 3found this answer helpful.
Was this helpful?helpful3unhelpful0
2 3 »
  • 2016-09-08 T11:41:26.275-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_202994372, prod, sort_default
2 3 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 295ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 4.3 out of 5 by 41 reviewers.
Rated 5.0 out of 5.0 by great lights for the price I was very skeptical about these lights due to price. Dont be. I have a 30x25 shop that i needed lights up in the ceiling area. I installed 9 of these (6 woulda been sufficient). I used the Philips daylight 6500k bulbs T8. All i can say is WOW! It lit it up! I opted to flush mount them by removing deflector there are pre drilled holes under it. Instructions say not to but they work well. Had 1 light that didnt work. But after removing deflector I found a wire un hooked. Hooked up and problem solved. I would buy again. March 22, 2016
Rated 5.0 out of 5.0 by Best light and a very reasonable cost. Lights came with everything needed to hang and are a nice size for a home office or craft room. August 9, 2016
Rated 5.0 out of 5.0 by very good value easy to install nice length on cord with plug...... June 24, 2016
Rated 5.0 out of 5.0 by lights I bought these lights for my storage bldg and they worked out perfectly. very good lights. May 17, 2016
Rated 4.0 out of 5.0 by Shop Light The Shop Lights were easy to install without any modification and did not require any calls to an electrician. I opened one fixture to see the installed ballast. The ballast rating allows for the use of a single or pair of 25 Watt T8 bulbs, a single or pair of 32 Watt T8 bulbs, or a single 40 Watt T8 bulb. The ballast information is far more flexible in use than the packaging claims for supporting the use of just a pair of 32 Watt bulbs. The T8 bulb offers the consumer a choice in power (25, 32, or 40 Watts) and operating temperature from warm to cold. This fixture, as built, offers a much wider flexibility in bulb selection and the number of installed bulbs than advertized. The value of this product is far greater than advertized. November 4, 2014
Rated 5.0 out of 5.0 by great product , even at the price paid!! I put two of them in my shop. Took about 15 minutes star to finish. I am going to get a couple more. April 13, 2016
Rated 5.0 out of 5.0 by Great unit Came right on and bright with recommended bulbs!!! April 7, 2016
Rated 4.0 out of 5.0 by Nice light Easy to install. Was used in a recessed area and provided good illumination. March 29, 2016
  • 2016-09-08 T11:59:20.445-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_41, tr_41
  • loc_en_US, sid_202994372, prod, sort_default
2 3 >>
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 33ms
  • REVIEWS, PRODUCT