0745973724224

Lithonia Lighting

Model 3348 2L32W WRAP

Internet #100654395

Store SKU #802542

2-Light White Utility Light

$20.97 /each
  • Interlocking design for easy install, lamp access and cleaning
  • Slim, wraparound design fits narrow ceiling areas
  • Requires two 32-Watt T8 straight tube lamps

Frequently Bought Together

Product Overview

The Lithonia Lighting 2-Light Utility Light uses a clear, prismatic acrylic lens with white steel end plates to provide widespread illumination. This light features a continuous-interlocking design for easy installation. Lamp access and cleaning.

  • Uses a clear, prismatic acrylic lens with white steel end plates
  • Diffuser features a continuous-interlocking design for easy installation, lamp access and cleaning
  • Slim, wraparound design fits narrow ceiling areas
  • Requires two 32-Watt T8 straight tube lamps
  • Energy Star qualified to meet or exceed federal guidelines for energy efficiency for year-round energy and money savings
  • UL listed

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

23 Questions59 Answers

Customer Questions & Answers

2-Light White Utility Light
2-Light White Utility Light

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
This question is from 2-Light White Utility Light
 
10 answers

can these fixtures be wired in tandem? Can they be wired straight through using a chase nipple?

This question is from 2-Light White Utility Light
Asked by
Buffalo, NY
Read all my Q&A
October 9, 2012
+1point
1out of 1found this question helpful.
Was this helpful?helpful1unhelpful0

Answers (10)

Asked by
Schenectady, NY
Read all my Q&A
Home Improvement Profile: Other
April 30, 2015
Answer: 
Fixture has no punch outs. You can't wire through the chassis. All wiring is meant to be done outside the fixture.
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0

Asked by
San Antonio, Texas
Read all my Q&A
December 1, 2014
Answer: 
yes, these units can be installed in tandem, ( check amp draw to your supply for maximum number to be wired ) and yes, you can use chase nipple(s) for wiring.
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0

Asked by
Orange, TX
Read all my Q&A
May 8, 2014
Answer: 
You would have to get a knock-out set or a drill bit to set these lights up that way but yes, it can be done.
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0

Asked by
Corvallis, OR
Read all my Q&A
January 31, 2014
Answer: 
These fixtures do not contain provision for making connections internal to the fixture. They do not have
knockouts at the ends, there's only one knockout, in the center of the fixture. The fixture contains a
label saying that connections must be made in an external junction box. Assembling and wiring
these fixtures in tandem would require modification and it wouldn't comply with the
Read More
These fixtures do not contain provision for making connections internal to the fixture. They do not have
knockouts at the ends, there's only one knockout, in the center of the fixture. The fixture contains a
label saying that connections must be made in an external junction box. Assembling and wiring
these fixtures in tandem would require modification and it wouldn't comply with the installation
requirements of their UL listing.
Read Less
0points
1out of 2found this answer helpful.
Was this helpful?helpful1unhelpful1

Asked by
San Jose, CA
Read all my Q&A
January 2, 2014
Answer: 
Not sure what a chase nipple is, but I plan to wire two together. Simple parallel connections to have them run off the same switch.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
New Hampshire, USA
Read all my Q&A
November 5, 2013
Answer: 
no knock-outs provided for end to end tandem mounting or side to side for that matter. Holes could be drilled.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
New Mexico
Read all my Q&A
August 7, 2013
Answer: 
The fixtures do NOT have holes (knockouts) for series installation but you can drill or punch a 1/2" hole and use a connector or half a spacer to series them yourself. You will also need to provide your own wire. Take care to make holes exactly in the same location to mating fixture so the tandem arrangement looks clean.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

April 2, 2013
Answer: 
Yes but don't buy them MTBF of ballast is about 1 year
0points
1out of 2found this answer helpful.
Was this helpful?helpful1unhelpful1

Asked by
Joshua Tree, CA 92252, USA
Read all my Q&A
January 15, 2013
Answer: 
All wiring should be done outside thefixture. Wire leads are long enough to accomodate wiring in the box. Lamps cannot be linked together, One lamp, wired to one box.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

October 10, 2012
Answer: 
No. unfortunately neither wiring option will work for this fixture.
Thank you!
0points
2out of 4found this answer helpful.
Was this helpful?helpful2unhelpful2
This question is from 2-Light White Utility Light
 
7 answers

Can you plug these into an outlet?

This question is from 2-Light White Utility Light
Asked by
BYC
Read all my Q&A
September 15, 2014
Does it come with a plug at the end, that it could be plugged into an outlet?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (7)

Asked by
Schenectady, NY
Read all my Q&A
Home Improvement Profile: Other
April 30, 2015
Answer: 
Short answer is no. These are meant to install over an electrical box. The fixture is not recommended to have electrical terminations within the fixture.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
San Antonio, Texas
Read all my Q&A
December 1, 2014
Answer: 
Yes, you can plug into the outlet, however, you will need to purchase the wiring suitable for outlet usage.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Toledo, OH, USA
Read all my Q&A
October 27, 2014
Answer: 
Yes.
-1point
0out of 1found this answer helpful.
Was this helpful?helpful0unhelpful1

Asked by
LaOtto, IN
Read all my Q&A
Home Improvement Profile: DIYer
October 18, 2014
Answer: 
No these are hard wired.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
Dallas Texas
Read all my Q&A
September 24, 2014
Answer: 
Yes you could wire it up to plug in to an outlet but it's not like that out of the box
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

September 16, 2014
Answer: 
No, this fixture is designed to be directly wired.
0points
1out of 2found this answer helpful.
Was this helpful?helpful1unhelpful1

Asked by
Oak Ridge, TN
Read all my Q&A
September 16, 2014
Answer: 
No- this product doesn't have a plug.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
This question is from 2-Light White Utility Light
 
7 answers

what are the balysts or replacement balyst that fit in the fixture. mine conked out. and how much does t cost in store? and what is the model number?

This question is from 2-Light White Utility Light
Asked by
imore
August 15, 2012
-1point
0out of 1found this question helpful.
Was this helpful?helpful0unhelpful1

Answers (7)

Asked by
Schenectady, NY
Read all my Q&A
Home Improvement Profile: Other
April 30, 2015
Answer: 
You need a ballast for 2 lamps 32 watt 4 ft T8. I like the GE 71037. They should be in the store in shrink wrap for about $20. If you had 100 of these on one circuit I would be a little more selective. For a house, shop, whatever, this is usually better than what you started with. Store Sku #126532.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
San Antonio, Texas
Read all my Q&A
December 1, 2014
Answer: 
Ballast are the internal units used in fixtures to create voltage and current in order to start and illuminate the florescent lamp. Best way to insure correct replacement is to remove clear plastic cover and obtain the model number and brand of ballast ( usually a rectangular white or black box ). Home depot can help you find the correct ballast with the information you provide them.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Orange, TX
Read all my Q&A
May 8, 2014
Answer: 
Your typical ballasts will run between $20 to $30. The model number will be listed on the ballast. At the store you will find a cross-reference sheet by the ballasts listing the replacement numbers from different manufactures.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
New Hampshire, USA
Read all my Q&A
November 5, 2013
Answer: 
My experience: cheaper to buy a whole new unit. We throw things away now-a-days, thats what landfills are for. Parts, nobody stocks all the parts...buy a spare unit if you want parts, probably cheaper too !
+1point
2out of 3found this answer helpful.
Was this helpful?helpful2unhelpful1

April 2, 2013
Answer: 
I bought 3 of these and within 2 years the ballasts on all 3 have failed.
They are garbage, get rid of them and buy something that isn't a Lithonia.
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0

Asked by
San Diego, CA, USA
Read all my Q&A
September 25, 2012
Answer: 
Get the information off the ballast itself. Then go to the store and buy the corresponding ballast.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

August 21, 2012
Answer: 
Please provide the ballast part number and we can further instruct you on how to replace it.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
This question is from 2-Light White Utility Light
 
5 answers

Are these fixtures wired for instant start ballast or rapid start ballast?

This question is from 2-Light White Utility Light
Asked by
T
September 19, 2013
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (5)

Asked by
San Antonio, Texas
Read all my Q&A
December 1, 2014
Answer: 
these units come with instant start ballast, however, before purchasing you may check the unit to verify the type of ballast available.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
LaOtto, IN
Read all my Q&A
Home Improvement Profile: DIYer
October 18, 2014
Answer: 
Yes they are instant start and I believe the box stated to -10 degrees.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Orange, TX
Read all my Q&A
May 8, 2014
Answer: 
The fixtures are instant start. These are equipped with electronic ballasts so as soon as you switch them on they light. The older fixtures you are used to that flickered in cold weather and started a little slower were equipped with magnetic ballasts.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Corvallis, OR
Read all my Q&A
Home Improvement Profile: DIYer
January 31, 2014
Answer: 
The fixture contains an electronic ballast that can be called "instant start".
I don't have long experience with this fixture, but I've found that lights come
on immediately even at 35F temperature in my shop. This fixture doesn't
have provision for making connections inside the fixture, it needs an external
junction box, which can be a hassle for some installations.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

September 19, 2013
Answer: 
This fixture uses a residential electronic ballast (120 volt, 60Hz) for instant on. Thanks for your question!
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
2 »
  • 2016-09-08 T13:35:51.026-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_100654395, prod, sort_default
2 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 119ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 3.5 out of 5 by 155 reviewers.
Rated 4.0 out of 5.0 by Economically priced/ hard to match ballasts up I purchased this about 5 years ago, & just recently had a ballast fail. Was hard to find matching ballast, & paid more for a replacement ballast than what the complete fixture was worth. Hopefully this is a better quality ballast. Decided to replace the ballast instead of the lamp, because old fixture already has my holes drilled for mounting purposes. Also found that new bulbs have a "break in time" to obtain maximum output. April 9, 2016
Rated 3.0 out of 5.0 by Average It's sad that I had a question to ask about the product after installing it, called two different Home Depot to talk to someone with an electrical background and there was no one available. August 3, 2016
Rated 5.0 out of 5.0 by replacement I bought this to replace the light in our utility room. It is the perfect replacement! July 25, 2016
Rated 4.0 out of 5.0 by 4' LIGHT FIXTURE REPLACEMENT FOR SIMILR FIXTURE...LAST VERSION LASTED 3 YEARS BEFORE FAILURE. THEY HAVE IMPROVED THE CONNECTION ENDS...THEY LOCK INTO POSITION...MUCH NICER. July 12, 2016
Rated 5.0 out of 5.0 by Good product Exactly as shown. Cheap and practical, easy to install. June 24, 2016
Rated 5.0 out of 5.0 by Love it Excellent product,would buy again and probably will in the future June 24, 2016
Rated 1.0 out of 5.0 by Poor quality Bought this 4 ft light for closet ceiling. Worked well for one week. Now you turn it on and it comes on at 1/3 power. This is with two new bulbs bought at the same time. Tried taking the bulbs out and putting them back in. The plexiglass cover is difficult to install - not easy as you have to force bend the ends to keep it closed. Instalation was easy but I am returning this product and buying another brand product. I recomend DO NOT buy this. May 10, 2016
Rated 2.0 out of 5.0 by 2 fixtures in 4 years The first burned out in 3 years, the 2nd in 1 year. I'll try something else. May 4, 2016
  • 2016-09-08 T15:42:28.537-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_155, tr_155
  • loc_en_US, sid_100654395, prod, sort_default
2 3 4 5 6 >>
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 61ms
  • REVIEWS, PRODUCT