0745977021497

Lithonia Lighting

Model # LKA3P

Internet # 202199128

Store SKU # 388948

3 in. Recessed New Construction Pan Accessory

$2.97 /each

Frequently Bought Together

Product Overview

The Lithonia Lighting 3 in. Recessed New Construction Pan Accessory is designed to convert a 3 in. remodel kit to new construction. The metal pan slides over the housing and snaps into place without the need for tools. Hanger bars accessory required for conversion (sold separately).

  • Frosted and clear stripe glass creates delicate contrast and diffuse light
  • Versatile design inspires creativity for quick and easy home upgrades
  • Standard fitter size accommodates a wide range of light fixtures
  • Thumbscrew installation is fast and simple (hardware not included)

Specifications

Dimensions

Product Depth (in.) 
Product Height (in.) 
2.1 
Product Width (in.) 

Details

Number in Pack 
Product Weight (lb.) 
1 lb 
Returnable 
90-Day 

Warranty / Certifications

Certifications and Listings 
1-UL Listed 
Manufacturer Warranty 
1 year 

More Products With These Features

Search

Customer Questions & Answers

2 Questions1 Answer

Customer Questions & Answers

3 in. Recessed New Construction Pan Accessory
3 in. Recessed New Construction Pan Accessory

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
 
1 answer

How does this allow access?

This question is from 3 in. Recessed New Construction Pan Accessory
Asked by
Buffalo, NY
Read all my Q&A
November 10, 2015
Once you put in wires and clamps, it's almost impossible to get the box through the hole. The picture in the directions for how to do this looks like it was drawn by a 7th grader on pot. If you use more than one knock-out, there's no way to get it in and out if this pan. The design is questionable here. It would have been much better to put two hole in the back of the junction (the part that sticks up when you are pulling it out, than to put three perpedicular to the pan when you trying to get it out.
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

November 18, 2015
Answer: 
Install NEW CONSTRUCTION ADAPTER ( purchased separately) by positioning the LKABH BAR HANGERS (purchased separately) between the ceiling joists and nailing in the attached nails to secure in place. Disconnect all power prior to installation. Pull supply wire through ADAPTER hole. Remove the appropriate pry-out knockout on junction box with screw driver. Open snap on cover on junction box by depressing Read More
Install NEW CONSTRUCTION ADAPTER ( purchased separately) by positioning the LKABH BAR HANGERS (purchased separately) between the ceiling joists and nailing in the attached nails to secure in place. Disconnect all power prior to installation. Pull supply wire through ADAPTER hole. Remove the appropriate pry-out knockout on junction box with screw driver. Open snap on cover on junction box by depressing spring and allow cover to hang. Using the provided wire connecters, make all connections inside the Junction box. Bring supply wires into Junction box by shielded cable or Romex cable and connectors (Purchased separately). Connect the 120V HOT wire black to black; NEUTRAL wire white to white; GROUND bare wire to ground, push wires carefully back into junction box. Close snap on cover in place. REMOVE the (3) SPRING CLIPS from the REMODEL FIXTURE and discard. Tilt Fixture junction box up through hole and position adapter spring clips with alignment grooves and rectangular openings on REMODEL CAN HOUSING. Push up for spring clips to securely snap in and lock in place. After electrical inspection is approved, complete ceiling installation, with the following cut out openings to:
 LKA3 = 3 1/4 inch diameter cutout
 LKA4 = 4 1/4 inch diameter cutout
 LKA5 = 5 5/8 inch diameter cutout
Read Less
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
0 answers

What is the depth of the circle beyond the flat surface of the mount?

This question is from 3 in. Recessed New Construction Pan Accessory
Asked by
Read all my Q&A
December 12, 2014
The depth of this circle is critical on what thickness material this "Pan Accessory" can be used for. Example: Can you use this adapter on a piece of 3/4" thick wood and have the recessed light fit flush with the underside?

Thanks
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0
1 of 1
  • 2016-07-27 T14:09:17.690-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_202199128, prod, sort_default
1 of 1
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 90ms
  • QUESTIONS, PRODUCT

Customer Reviews

  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 63ms
  • REVIEWS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;