0784231163238

Lithonia Lighting

Model 3902RE

Internet #100177768

Store SKU #486977

Dentil 1-1/2 ft. x 4 ft. 4-Light Fluorescent Ceiling Fixture

$126.00 /each

Frequently Bought Together

Product Overview

The Lithonia Lighting Dentil 1-1/2 ft. x 4 ft. Fluorescent Ceiling Fixture features an elegant, oak finish and a crown-molding design with Dentil detailing. The durable, milk white acrylic, dropped dish diffuser provides a wide spread, uniform illumination. This fixture is ideal for use in kitchens, office areas and closets.

  • Utilizes linear T8 lamps for energy efficiency, superior color rendering and long life (not included)
  • Lift and shift diffuser provides easy access for cleaning and maintenance
  • Matt texture prevents fingerprints
  • For use with non-dimmable switches only
  • All mounting hardware included
  • Guaranteed for 2 years against mechanical defects in manufacture
  • Unique flush mount system eliminates light leaks

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

28 Questions45 Answers

Customer Questions & Answers

Dentil 1-1/2 ft. x 4 ft. 4-Light Fluorescent Ceiling Fixture
Dentil 1-1/2 ft. x 4 ft. 4-Light Fluorescent Ceiling Fixture

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
 
4 answers

what is part number for the white acrylic diffuser that fits in Lithonia 764126? The diffuser measures 16" x 48".

This question is from Dentil 1-1/2 ft. x 4 ft. 4-Light Fluorescent Ceiling Fixture
Asked by
Dan
August 31, 2012
+2points
2out of 2found this question helpful.
Was this helpful?helpful2unhelpful0

Answers (4)

Asked by
Monmouth, Oregon
Read all my Q&A
Home Improvement Profile: DIYer
March 7, 2016
Answer: 
Yes the diffuser seems hard to get in/out the first time, but it is really a short learning curve.One merely slithers it up and a bit sideways till one long side slips out, then the end and presto. Done. We bought the fixture 8 years ago, DIY, and happy! We are on our third set of fluorescent tubes, but STILL USING THE .ORIGINAL DIFFUSER. So there.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
New Port Richey, Fl
Read all my Q&A
Home Improvement Profile: DIYer
April 26, 2014
Answer: 
Model # D15SBDDROP Internet # 100652105 Don't waste your money made of brittle plastic you will crack it again!!!!
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0

Asked by
New Port Richey, Fl
Read all my Q&A
Home Improvement Profile: DIYer
April 26, 2014
Answer: 
Model # D15SBDDROP Internet # 100652105 Don't waste your money there brittle plastic and they will crack every time you take them out or install them.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

September 5, 2012
Answer: 
Please order the following:
Lithonia Lighting 1-1/2 ft. x 4 ft. Dropped White Acrylic Diffuser
Model # D15SBDDROP
Internet # 100652105
+6points
6out of 6found this answer helpful.
Was this helpful?helpful6unhelpful0
 
3 answers

Can 40w T12 lamps be used with this fixture ?

This question is from Dentil 1-1/2 ft. x 4 ft. 4-Light Fluorescent Ceiling Fixture
Asked by
Read all my Q&A
April 3, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (3)

Asked by
Fullerton, Ca
Read all my Q&A
Home Improvement Profile: Other
April 28, 2016
Answer: 
I've been using 40w T12 bulbs in my fixture for more than 6 years with no troubles. I wonder if 60W bulbs are compatible since with 40w there is insufficient light for me.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

April 6, 2016
Answer: 
Thank you for your email. T12 lamps cannot be used. The ballast in this fixture is only compatible with T8 lamps.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

April 5, 2016
Answer: 
No, you can not use 40 W t12 lamps with this fixture.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
3 answers

how do you flush mount the frame to the ceiling

This question is from Dentil 1-1/2 ft. x 4 ft. 4-Light Fluorescent Ceiling Fixture
Asked by
Texas
Read all my Q&A
March 9, 2014
We can't seem to figure out how the frame with diffuser inside is mounted to the ceiling. Don't see any holes, screws, etc.
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (3)

Asked by
New Port Richey, Fl
Read all my Q&A
April 26, 2014
Answer: 
The light fixture has two little screw holes in each end you hold the frame up against the ceiling and from the fixture out toward the wood frame you use two Phillip screws in each end and once you have that done you put the bulbs in and try your best two pop the diffuser in without cracking it. I had mine up about 4 months and the bulbs all ready started going out so I went to take the diffuser out to Read More
The light fixture has two little screw holes in each end you hold the frame up against the ceiling and from the fixture out toward the wood frame you use two Phillip screws in each end and once you have that done you put the bulbs in and try your best two pop the diffuser in without cracking it. I had mine up about 4 months and the bulbs all ready started going out so I went to take the diffuser out to change them and it cracked it is made out of brittle plastic so I ordered two more diffusers for back ups at 50.00 dollars a piece and broke the second one in and cracked it. I have one diffuser left so if I crack it the next time I have to change the bulbs I am just going to bite the bullet and by a different style light. My advice is take it back and buy a better style light!! GOOD LUCK!!! Read Less
+5points
5out of 5found this answer helpful.
Was this helpful?helpful5unhelpful0

Asked by
Ocala, Fl
Read all my Q&A
April 26, 2014
Answer: 
The light fixture at the ends has two little screw holes in the end you use two phillip screws threw the holes and they screw into the wood and after that the diffuser goes in last and GOOD LUCK not cracking it. I have cracked two now at 50.00 dollars a piece. I would take it back now and buy a different style light. GOOD LUCK!!!!!!
+3points
3out of 3found this answer helpful.
Was this helpful?helpful3unhelpful0

March 17, 2014
Answer: 
Lift fixture housing or mounting template (if provided) to ceiling, centering over outlet box and parallel to walls. Mark ceiling with pencil for mounting holes through (2) 1/4" x 3/8” slots. Drill 1/8” pilot hole at each location.
If drill encounters ceiling joist, hold fixture up to outlet box and pull electrical supply wires into fixture through the knockout hole, use wood screw at each end of the
Read More
Lift fixture housing or mounting template (if provided) to ceiling, centering over outlet box and parallel to walls. Mark ceiling with pencil for mounting holes through (2) 1/4" x 3/8” slots. Drill 1/8” pilot hole at each location.
If drill encounters ceiling joist, hold fixture up to outlet box and pull electrical supply wires into fixture through the knockout hole, use wood screw at each end of the fixture body to secure to ceiling joist.
If drill does not encounter ceiling joist, enlarge hole in ceiling to accommodate toggle bolt. Hold fixture up to outlet box and pull electrical supply wires into the fixture through the knockout hole, insert and tighten toggle bolts.
Please visit: http://www.acuitybrandslighting.com/library/ll/documents/otherdocuments/cambridge_linear.pdf
for additional details. Thanks for your question.
Read Less
0points
1out of 2found this answer helpful.
Was this helpful?helpful1unhelpful1
 
3 answers

Does it include the light bulbs, the description does not state if included or not?

This question is from Dentil 1-1/2 ft. x 4 ft. 4-Light Fluorescent Ceiling Fixture
Asked by
Federal Waty, WA
Read all my Q&A
October 4, 2013
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (3)

Asked by
Read all my Q&A
December 17, 2013
Answer: 
No, will need to purchase bulbs extra. I would grab the contractor 10 pack -- price wise this makes more sense.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
Thompson, PA 18465, USA
Read all my Q&A
December 17, 2013
Answer: 
No. You must purchase the bulbs for this fixture separately.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

October 8, 2013
Answer: 
The bulbs are not included. This fixture requires four T8s. Thanks for your question!
-1point
0out of 1found this answer helpful.
Was this helpful?helpful0unhelpful1
2 3 »
  • 2016-08-24 T13:52:36.014-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_100177768, prod, sort_default
2 3 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 102ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 3.9 out of 5 by 37 reviewers.
Rated 5.0 out of 5.0 by Close Enough Light Fisture I was replacing a faulty light fixture which I had originally purchased in 1987 when I added an addition to my home. Home Depot carried the same style and dimension fixture (about 5' x 2'). The only difference was the style of the wooden frame around the light, so I used the original frame which matches a second light in the same room. Everything looks great and works great. Very happy with the purchase. Thank you, Home Depot! February 10, 2016
Rated 4.0 out of 5.0 by I received exactly what I expected. I ordered this for a very small kitchen but it fit in beautifully. Im glad I purchased it. Easy installation. Arrived quicker than I expected and in good condition. Thank you Home Depot. June 29, 2016
Rated 5.0 out of 5.0 by Nice replacement fixture We ordered this fixture to brighten our kitchen. Was quite easy to install, met our expectations. Would suggest improving the interior packaging as it arrived with minor (easily repaired) damage. The oak is perfectly cut and looks great! May 31, 2016
Rated 2.0 out of 5.0 by Low quality Oak Dentil fluoroscent light fixture I bought this lamp for my study. I had to buy the lamp online it was discontinued in the store. I looked up the reviews and it seemed the only major issue was with the plastic diffuser and some difficulty with installation. When i went to install the oak Dentil i noticed that the wood was not evenly stained and the varnish was not smooth. I think for the price the quality of the finish could be much improved. I called the Lithonia 800# and they sent me a new Oak Dentil. Their service was prompt and courteous.. February 26, 2016
Rated 5.0 out of 5.0 by Great light for the kitchen! I didn't do the installation but it provides a lot of light in my kitchen for cooking, etc. February 12, 2016
Rated 5.0 out of 5.0 by Dentil 1-1/2 FT. X 4 FT Florescent Ceiling Fixture Was what we were looking for to add to our kitchen. The wood trim fits well with our décor and was very easy to install. February 10, 2016
Rated 4.0 out of 5.0 by Well made fixture. Great improvement over my old fixture with U-shaped bulbs. Easy installation. Translucent bulb cover a little difficult to install, just take you time and don't force and it will not break. $49 for a replacement cover is a little over priced. January 1, 2016
Rated 5.0 out of 5.0 by best lighting for my kitchen rate excellent #10 easy to install,looks very nice rate a 10,really brightens up the kitchen November 3, 2015
  • 2016-08-05 T23:55:59.228-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_37, tr_37
  • loc_en_US, sid_100177768, prod, sort_default
2 >>
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 56ms
  • REVIEWS, PRODUCT