Rated 2.5 out of 5 by 15
Rated 1.0 out of 5.0 by MikeChr Flimsy Construction.
The end caps with the tube sockets barely hold on to the main body that is mounted under the counter. It took me three attempts to install the tubes without the end caps falling off. I'm afraid to touch the fixture at this point for fear of the whole thing falling apart again.
December 4, 2015
Rated 4.0 out of 5.0 by jb Great light
Provides bright light using LED's - Installation was easy - this was my second purchase and am pleased.
December 8, 2015
Rated 1.0 out of 5.0 by Enoughisenough Enough is enough
We've renovated two houses over the past several years. Wherever we needed basic fluorescent utility lighting (garages, basements) we've ended up trying Lithonia, because that's what they sell at Home Depot. Having bought about a dozen Lithonia fixtures over the years, I'd say about 50% come out of the box missing parts - screws, wire nuts, other things - and about 80% are just really badly made - knockouts don't actually knock out, wires just break off, or the fixture just comes apart in my hands. Literally.
Cheap can be useful or useless. Lithonia is more often than not useless. Save yourself time and frustration - don't use these.
September 15, 2013
Rated 4.0 out of 5.0 by Beau FLUORESCENT UTILITY LIGHT
Works well, but you have to provide and attach your own power cord or wire it in permanently.
May 26, 2015
Rated 5.0 out of 5.0 by Kelly Great for replacing old lighting
Yes, for the price this is an excellent product. Small and compact but gives off plenty of light for my needs.
February 10, 2015
Rated 2.0 out of 5.0 by BeRosy Pretty much junk, but working so far
Bought and installed yesterday evening. Completely caved in the end of the fixture trying to knock out the knockout. Much, much lower quality than the Lithonia T12 fixture from the 1970s that I was replacing. But after a lot of fiddling and un-bending I did get it installed and working. I used a plastic snap-in cable clamp on an end knockout, and it fit with zero clearance. I can see why a metal one wouldn't fit at all. Also would have been nice if it had come with a couple mounting screws, but it didn't. Now I just hope it keeps working more than 25 days.
October 30, 2013
Rated 1.0 out of 5.0 by Mike Don't waste (alot of) your time
As mentioned by others the knock-outs are poorly stamped and very difficult to remove. You WILL have to bend the tombstone back into shape to use it. You will then discover there isn't room for the lock nut if you use a metal NM connector. Only after significant bending, prying, adjusting and cursing did I manage to get the fixture to fit back together. I would have tried a plastic NM connector if I had one at the time. After all that I was able to use it for 2 weeks and then It started to trip the GFCI receptacle it was plugged into.
May 4, 2013
Rated 4.0 out of 5.0 by Hemant Easy to assemble and setup
Picked up recommended accessories and got it on kids room wall. Very well priced.
August 12, 2014