0745972953724

Lithonia Lighting

Model OVT 150I 120 M6

Internet #100652873

Store SKU #978071

Store SO SKU #1000713399

Pewter Incandescent Outdoor Flushmount Vapor Tight Light Fixture

$29.97 /each

Frequently Bought Together

Product Overview

The Lithonia Lighting Flush-Mount Vapor Tight Incandescent Light Fixture has a 150-Watt maximum protective design that seals against dust, moisture, fumes and insects. It is weather resistant and features clear glass in a rugged, die-cast aluminum housing with an appealing pewter finish.

  • Die-cast aluminum housing with a pewter finish
  • Clear glass
  • Full gasket to seal against dust, moisture, fumes and insects
  • 1/2 in. conduit openings on top and sides of glass globe
  • Flush-mount installation
  • Weather resistant
  • Uses one 150-Watt incandescent bulb (maximum, not included)

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

6 Questions10 Answers

Customer Questions & Answers

Pewter Incandescent Outdoor Flushmount Vapor Tight Light Fixture
Pewter Incandescent Outdoor Flushmount Vapor Tight Light Fixture

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
This question is from Pewter Incandescent Outdoor Flushmount Vapor Tight Light Fixture
 
3 answers

can a dimmer switch be used on this fixture? can this be used as an indoor light?

This question is from Pewter Incandescent Outdoor Flushmount Vapor Tight Light Fixture
Asked by
Read all my Q&A
March 2, 2014
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (3)

Asked by
Read all my Q&A
Home Improvement Profile: DIYer
November 7, 2014
Answer: 
Only if you use the old time regular light bulbs...I used it as an indoor garage light....
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Wills Point, TX
Read all my Q&A
May 7, 2014
Answer: 
A dimmer can be used as long as the bulb installed is dimmable such as an incandescent bulb or a dimmable cfl.
you can mount these just about anywhere, inside or out, just as long as there is adequate clearance (this fixture is 9" tall)
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

March 5, 2014
Answer: 
Yes, you should be able to use an incandescent dimmer but this fixture. However, it is rated for outdoor use so I would not recommend using it for indoor unless you have adequate ventilation but that application would have to be at your discretion. Thanks for your question.
-1point
0out of 1found this answer helpful.
Was this helpful?helpful0unhelpful1
This question is from Pewter Incandescent Outdoor Flushmount Vapor Tight Light Fixture
 
3 answers

I need three replacement glass globes. Can I order these?

This question is from Pewter Incandescent Outdoor Flushmount Vapor Tight Light Fixture
Asked by
Mark
Holcomb Bridge Store Roswell GA
August 13, 2012
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (3)

Asked by
Las Vegas, NV, USA
Read all my Q&A
April 9, 2013
Answer: 
I would go to the "Homedepot" and see if you can match it in person. It is possible however, it may be a special order.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Read all my Q&A
January 17, 2013
Answer: 
Home Depot does not carry and Lithonia does not offer. I to have three lights that need replacement glass globes. Mine are installed on a boat dock. Believe the wet conditions combined with freezing caused the glass to crack.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

August 14, 2012
Answer: 
I apologize, but we do not sell replacement globes for this fixture.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
This question is from Pewter Incandescent Outdoor Flushmount Vapor Tight Light Fixture
 
2 answers

Can these be mounted onto the base of a floodlight?

This question is from Pewter Incandescent Outdoor Flushmount Vapor Tight Light Fixture
Asked by
efeb
January 2, 2013
I have 5 single lamp floodlight bases wired as ceiling mounts to light my patio and am looking for a more aesthetic look. I am wondering if this fixture would be suitable to repalce them.
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
Las Vegas, NV, USA
Read all my Q&A
April 9, 2013
Answer: 
Yes, it would be able to replace floodlights.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

January 3, 2013
Answer: 
Howdy efeb,
You can if you drill holes on your base. The width is 4.18 inches for the decorative nautical lighting fixture. Most likely you will only need to use the existing holes and either bend the base of the fixture to have a fit. If the size is too great of a difference you can drill more holes in the base to make the cage fit onto the existing recepticles.
Be careful and have fun being
Read More
Howdy efeb,
You can if you drill holes on your base. The width is 4.18 inches for the decorative nautical lighting fixture. Most likely you will only need to use the existing holes and either bend the base of the fixture to have a fit. If the size is too great of a difference you can drill more holes in the base to make the cage fit onto the existing recepticles.
Be careful and have fun being creative.
Coach Dave
Read Less
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
This question is from Pewter Incandescent Outdoor Flushmount Vapor Tight Light Fixture
 
1 answer

Can I use an LED bulb with this fixture? If not, why not?

This question is from Pewter Incandescent Outdoor Flushmount Vapor Tight Light Fixture
Asked by
Raleigh, North Carolina
Read all my Q&A
March 28, 2015
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

March 30, 2015
Answer: 
No, this fixture is designed to be use with an incandescent bulb. Please search Internet # 203839084 for the LED Vapor Tight.
-1point
1out of 3found this answer helpful.
Was this helpful?helpful1unhelpful2
2 »
  • 2016-09-08 T13:09:24.690-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_100652873, prod, sort_default
2 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 22ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 4.1 out of 5 by 21 reviewers.
Rated 5.0 out of 5.0 by Pewter incandescent outdoor flushmount vapor light This item was so easy to install. We needed to replace a light fixture by a salt water pool and we are hoping this will fit the bill. June 28, 2016
Rated 4.0 out of 5.0 by It works, but not quite as expected. It works and looks fantastic. Hold it in your hand though and it looks and feels cheap. The description on line says it's "dusk to dawn" and it is not. As other reviews have mentioned the threads on the glass are a little wonky but put some WD-40 on it and it's fine. Using my old shade, I got the hipster-industrial look I was going for at a reasonable price. May 12, 2015
Rated 5.0 out of 5.0 by great product Easy-to-use, good value for the quality. My customer loved the product. March 29, 2016
Rated 5.0 out of 5.0 by Perfect Outdoor Light Perfect light for an outdoor environment. Installed two on the underside of a raised deck next to a salt water canal. Other lights have failed in about a year, We will have to see how these lights fair; update to follow. March 15, 2016
Rated 5.0 out of 5.0 by Light it Love this little light looks good works great Easy hook up December 23, 2015
Rated 5.0 out of 5.0 by A good product for risky areas Kind of a specialty fixture for areas where vapors are explosive or in my case where a broken bulb would risk injury or contamination. December 15, 2015
Rated 5.0 out of 5.0 by Garage lighting I have four of these lights in my garage, they install easily and provide great protection against garage mishaps. September 8, 2015
Rated 1.0 out of 5.0 by Very poor quality, cheaply made I purchased and installed 3 of these fixtures. I am not impressed, it seems all the threads are messed up, from the set screws to the plugs on the bottom and sides. I had a pretty difficult time threading the pvc conduit fitting in the side so I just tried another hole and it too had tight threads. When I finally installed the fixture and tried to tighten the set screw for the cage, the top of the screw stripped because the threads are so tight. The glass globes are EXTREMELY thin on the end (rounded end) and I broke one when I bumped the cage against it and unfortunately they don't sell replacement glass for these fixtures you have to buy the whole fixture. May 7, 2014
  • 2016-09-08 T14:28:55.464-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_21, tr_21
  • loc_en_US, sid_100652873, prod, sort_default
2 >>
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 23ms
  • REVIEWS, PRODUCT