0784231074121

Lithonia Lighting

Model LB 2 32 MVOLT MVIS

Internet #202591813

Store SKU #453879

Wrap Multi-Volt 2-Light White Ballast Ceiling Flushmount

$49.47 /each
  • Ideal for use in garages, workshops, kitchens and utility rooms
  • Durable steel construction with a white finish
  • Uses two 32-Watt T8 straight tube bulbs (not included)

Frequently Bought Together

Product Overview

The Lithonia Lighting 2-Light 4 ft. Multi-Volt Wrap provides bright, uniform illumination. Ideal applications include general lighting for garages, workshops, kitchens, utility rooms/spaces and corridors in commercial and residential environments. A multi-volt ballast (120-277-Volt) insures instant-on and no humming or flickering. Light output is approximately equal to (3-1/2) 100-Watt incandescent bulbs.

  • Energy efficient fluorescent technology
  • Lift-and-shift clear acrylic prismatic lens allows for tool-free bulb replacement
  • Durable steel construction with a white finish
  • Requires two 32-Watt, instant-start octron T8 medium bi-pin linear fluorescent bulbs (sold separately)
  • For use with non-dimmable switches only
  • UL listed to US safety standards
  • Note: product may vary by store

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

25 Questions27 Answers

Customer Questions & Answers

Wrap Multi-Volt 2-Light White Ballast Ceiling Flushmount
Wrap Multi-Volt 2-Light White Ballast Ceiling Flushmount

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
This question is from Wrap Multi-Volt 2-Light White Ballast Ceiling Flushmount
 
2 answers

How many lights 30' x 24' garage.

This question is from Wrap Multi-Volt 2-Light White Ballast Ceiling Flushmount
Asked by
Read all my Q&A
August 2, 2016
I have a 30'x24' garage that i would like to light. What would be the min required number of fixtures and what would be the optiminal for auto work and wood working?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

August 14, 2016
Answer: 
We would recommend using 6 or more fixture in this space.
6 fixtures used on a 10 ft ceiling will provide 40 Foot Candles at a work plane of 3 feet.
Thank you for your question.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Read all my Q&A
Home Improvement Profile: DIYer
August 5, 2016
Answer: 
Hi Evan.
Thank you for your great question.
For your 720 sq. ft. garage, it looks like you will need a minimum of 9 double bulb fixtures up to about 18 fixtures to achieve an optimal lighting arrangement using 32- watt T-8 bulbs.
The higher the ceiling in your garage, the more lights you will need.
It would also be a good idea to add separate switches to each 2-4 group of lights.
Please Read More
Hi Evan.
Thank you for your great question.
For your 720 sq. ft. garage, it looks like you will need a minimum of 9 double bulb fixtures up to about 18 fixtures to achieve an optimal lighting arrangement using 32- watt T-8 bulbs.
The higher the ceiling in your garage, the more lights you will need.
It would also be a good idea to add separate switches to each 2-4 group of lights.
Please let us know if we can be of further assistance.
Rick_HD_OC Read Less
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
This question is from Wrap Multi-Volt 2-Light White Ballast Ceiling Flushmount
 
2 answers

How does the pre exists wires go into the quick connect on the new light

This question is from Wrap Multi-Volt 2-Light White Ballast Ceiling Flushmount
Asked by
Read all my Q&A
July 8, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

August 16, 2016
Answer: 
To use the yellow ballast disconnect plug you will use the top two holes to push your power wires in matching black to black and white to white.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Artesia, New Mexico
Read all my Q&A
Home Improvement Profile: DIYer
August 3, 2016
Answer: 
As you look at the end, make Shure that you are hooking the black to the black and the white to the white. You tie the ground to the unit on the green screw, you may have to put a piece of wire on to extend some of the wires. As long as the size of the wires that feed the to the box aren't too big, they should slide right into the quick connect. If they don't, cut off quick connect and use wire nuts to Read More
As you look at the end, make Shure that you are hooking the black to the black and the white to the white. You tie the ground to the unit on the green screw, you may have to put a piece of wire on to extend some of the wires. As long as the size of the wires that feed the to the box aren't too big, they should slide right into the quick connect. If they don't, cut off quick connect and use wire nuts to tie together. Read Less
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
This question is from Wrap Multi-Volt 2-Light White Ballast Ceiling Flushmount
 
2 answers

How do I get the lens cover off to change a tube that has gone out?

This question is from Wrap Multi-Volt 2-Light White Ballast Ceiling Flushmount
Asked by
San Luis Obispo CA
Read all my Q&A
October 22, 2015
The electrician who installed the fixtures did not save the instructions and 4 months later a tube went out. We can't figure out how to get the cover off.
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
Washington State
Read all my Q&A
December 13, 2015
Answer: 
The mfg recommendation below seems to be the only way but whoever designed this fixture should be doomed to standing on a 10' stepladder trying to pull the cover off for the next 100 years! I finally had to take the end cap loose to get the cover to flex enough to pop off. A real PAIN!!
+3points
3out of 3found this answer helpful.
Was this helpful?helpful3unhelpful0

October 26, 2015
Answer: 
Thank you for your email......From the end of the fixture you remove the cover by sliding the cover to one side, then lift up opposite side over the flange. With your fingertips work the lens off the flange down the side of the fixture until it releases.
+2points
3out of 4found this answer helpful.
Was this helpful?helpful3unhelpful1
This question is from Wrap Multi-Volt 2-Light White Ballast Ceiling Flushmount
 
2 answers

I want to put 4 units in my basement, do I need to use the plastic lens "wrap" or can I leave those off.

This question is from Wrap Multi-Volt 2-Light White Ballast Ceiling Flushmount
Asked by
Olddog
Livonia, Mi. 48154
October 18, 2012
Thanks
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
Read all my Q&A
July 9, 2013
Answer: 
leave them off, no problem
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
Tangelo
Chicago
October 19, 2012
Answer: 
Hello this is Tangelo from the Home Depot Community!
You can operate the light with the plastic lens in place or remove it.
I hope this helps, if you have any more questions you can find me on our website at community.homedepot.com
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
2 3 »
  • 2016-09-08 T13:41:13.018-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_202591813, prod, sort_default
2 3 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 65ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 4.2 out of 5 by 25 reviewers.
Rated 3.0 out of 5.0 by bad design Wrap around covers are hard hard hard to put on and get in the right place when working on a ladder, had 2 fall off during the night . If you use these put a zip tie around then to keep in place just for safety's sake September 6, 2016
Rated 5.0 out of 5.0 by Great product The light is very light and easy to hold up while installing the screws. The electrical connections were a breeze. Only took a few moments to install. The light gives off great light. I installed it in a kitchen where lots of light is needed. August 2, 2016
Rated 4.0 out of 5.0 by Adequate I bought this product to replace one I bought over 5 years ago which finally failed. Of course, the exact model was no longer available, but this one "appeared" identical. I ordered it, replaced the old one with it, and it no one can tell it was replaced. However, the underlying construction had changed from 5 years ago -- by that I mean flimsier, thinner metal and less of it. I have to replace these fixtures every few years because the smaller, cheaper ballasts they started to use 10+ years ago just don't last. To compare, I bought 3 such fixtures in 1993 which were still working in 2016 when they were finally decommissioned. This company, and probably most companies, continue to look for ways to maintain a look while gutting quality construction. June 7, 2016
Rated 4.0 out of 5.0 by NICE LIGHT These lights are great for a room that needs a little less light. They are easy to install. The light cover needs some work. June 28, 2016
Rated 3.0 out of 5.0 by Average Average fixture nothing stands out good or bad just ok May 3, 2016
Rated 4.0 out of 5.0 by Shipping damage I ordered 18 lights for a project 2 had the covers cracked when I got them. Other than that they are a good buy. April 26, 2016
Rated 5.0 out of 5.0 by Light is a smaller space Light was easy to install. The light cover was a bit of a challenge. In the end, it worked fine. March 31, 2016
Rated 4.0 out of 5.0 by Shop light Would have liked better spacing between the mounting holes but overall an excellent purchase March 29, 2016
  • 2016-09-08 T16:01:31.717-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_25, tr_25
  • loc_en_US, sid_202591813, prod, sort_default
2 >>
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 60ms
  • REVIEWS, PRODUCT