0010121106376

Suggested Replacement

360 Pony Pump Series 0.5 HP Non-Submersible Self-Priming Transfer Pump
  • Little Giant
  • Model # 555112
  • Internet # 206870822

360 Pony Pump Series 0.5 HP Non-Submersible Self-Priming Transfer Pump

$111.48 /each

Compare to Discontinued Model View Product

Discontinued Model

Discontinued

Little Giant

Model # 555502

Internet # 204264935

Pony Pump Series .5 HP Non-Submersible Self-Priming Transfer Pump

This item has been discontinued.
The Home Depot no longer carries this specific product.

Frequently Bought Together

Product Overview

These lightweight, portable pumps, with self-priming, siphon-like action, can be used to empty waterbeds, drain water heaters or aquariums, pump out a basement, transfer water to an RV, pump boat bilges, pump out stock tanks, and in just about any other application where water needs to be transferred. Pump inlets and outlet are dual-threaded 3/8 in. FNPT and 3/4 in. garden hose thread. Intermittent duty is 15 minutes on, 45 minutes off.

  • Self-priming for instant delivery or de-watering up to 6 ft.
  • Non-submersible plated brass pump body
  • Rugged metallic handle for easy portability
  • Dual threaded intake and discharge with both 3/4 in. male garden hose thread and 3/8 in. FNPT

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Maximum Pumping Height (ft.) 
25 
Product Depth (in.) 
6.62 
Product Height (in.) 
4.5 
Product Width (in.) 

Details

Adjustable Speed 
No 
Amperage (amps) 
1.6 
Cord Length (ft.) 
Corrosion Resistant 
Yes 
Discharge Flow @ 0 ft. (gallons/hour) 
360 
Discharge Flow @ 10 ft. (gallons/hour) 
300 
Float Switch 
No 
Hardware Included 
No 
Head Pressure (ft.) 
Horsepower (hp) 
1/2 hp 
Housing Material 
Other 
Inlet Connection 
Threaded female 
Maximum Discharge Flow (gallons/hour) 
198 
Maximum Working Temperature (F) 
104 
Minimum working temperature (F) 
40 
Outlet Connection 
Threaded female 
Power Type 
Electric 
Power Type Required 
AC 
Product Weight (lb.) 
3.5 lb 
Pump Switch Type 
Switchless 
Returnable 
90-Day 
Run-Dry Capable 
No 
Self-Priming 
Yes 
Submersible 
No 
Voltage (volts) 
115 

Warranty / Certifications

Certifications and Listings 
1-UL Listed,CSA Listed 
Manufacturer Warranty 
Limited Warranty 

More Products With These Features

Search

Customer Questions & Answers

2 Questions2 Answers

Customer Questions & Answers

Pony Pump Series .5 HP Non-Submersible Self-Priming Transfer Pump
Pony Pump Series .5 HP Non-Submersible Self-Priming Transfer Pump

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
 
1 answer

Product arrived has different specifications than listed on web

This question is from Pony Pump Series .5 HP Non-Submersible Self-Priming Transfer Pump
Asked by
Bethlehem, PA
Read all my Q&A
January 14, 2015
The specifications on the web state that the max pumping height is 48.3 ft. Product box states max as 25 ft. Which is it?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

Asked by
Read all my Q&A
January 22, 2015
Answer: 
Thank you for pointing this out. It is confusing and poorly worded we will clarify. However, ironically both claims are correct but again poorly worded. 25 ft reflects the maximum height you would want this pump to work at. But if you look at the spec sheet 48' is the point at which the pump curve goes to zero flow. Put differently, 25' is the maximum wall you would want to use this pump to pump over. Read More
Thank you for pointing this out. It is confusing and poorly worded we will clarify. However, ironically both claims are correct but again poorly worded. 25 ft reflects the maximum height you would want this pump to work at. But if you look at the spec sheet 48' is the point at which the pump curve goes to zero flow. Put differently, 25' is the maximum wall you would want to use this pump to pump over. While 48' reflects the height of the wall where the pump would "dead head" meaning it would get a small amount of water to the top of the wall but non would go over. Traditionally many engineers want to know the point at which a pump dead heads. As Little Giant's roots are in the trades much of there info is still geared that way. Again thank you for your constructive criticism we will use it to make the sight more informative and user friendly. Read Less
-1point
0out of 1found this answer helpful.
Was this helpful?helpful0unhelpful1
 
1 answer

Will this pump work if the water level is 10/12 feet below the position of the pump?

This question is from Pony Pump Series .5 HP Non-Submersible Self-Priming Transfer Pump
Asked by
Pa.
Read all my Q&A
January 11, 2014
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

Asked by
Springville, UT
Read all my Q&A
January 27, 2014
Answer: 
Hello,
Thank you for your question.
Unfortunately we at Little Giant Ladders only sell ladders.
This pump is not made or sold by us.
Thanks,
Little Giant Ladders Support
-3points
1out of 5found this answer helpful.
Was this helpful?helpful1unhelpful4
1 of 1
  • 2016-07-22 T15:12:45.403-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_204264935, prod, sort_default
1 of 1
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 242ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 5.0 out of 5 by 1 reviewer.
Rated 5.0 out of 5.0 by great buy. I would recommend it. I used it to pump water out of an opening in my basement during the South Carolina floods. They don't call it a little giant for nothing. I was able to keep the water under control and probably prevented more issues. October 13, 2015
  • 2016-07-22 T15:30:28.415-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_1, tr_1
  • loc_en_US, sid_204264935, prod, sort_default
1-1 of 1
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 254ms
  • REVIEWS, PRODUCT