Rated 2.6 out of 5 by 10
Rated 1.0 out of 5.0 by DaveG Gave it a try. it failed
If you mix it by hand it's OK, but that defeats the purpose of the Instamix adapter.
When applying it straight from the Instamix tube, it never hardens, stays tacky and soft.
May 24, 2016
Rated 1.0 out of 5.0 by timct doesnt work on surfaces
This is the second Loctite product i tried and both failed. Trying to apply wood to glass and this product worked better but still didnt do the job. Seems like all the companys products are bad and guess time to use liquod nails instead- cant believe i wasted $10 and possibly ruined my project by trying these products
February 12, 2016
Rated 1.0 out of 5.0 by Engineer DO NOT BUY
Take it from a plastics engineering within the automotive industry, this product is terrible. Like many others have stated, it sets, but does not cure. No amount of time cured this product and even manually mixing the resin with hardener did not solve the issue. The issue with this product lies within the hardener formulation itself. It disappoints me to write this review as I use an extensive amount of Henkel adhesives for my career. At least I have contacts within the company to bring this issue to their attention.
November 10, 2015
Rated 5.0 out of 5.0 by cmill Worked where others failed
This stuff is awsome. Not really sure what happened with the other bad reviews, but worked great for me. Just remove the tab and insert the nozzle. It mixes automatically so you don't have to worry about getting the consistency right, and it dries like steel super fast. I used j.b weld on the item I was trying to fix, but within a day, it failed. This stuff has been holding strong for over a week with no signs of breakage. The only thing about this is, if you dont use it all in one shot, it may be wasted because the tube gets gunked up. Other than that, This is my new go to apoxy!
July 16, 2015
Rated 5.0 out of 5.0 by Jerry How to use this product
On this Loctite 1 Minute epoxy, I just read the reviews and some of them complained about the nozzle getting plugged up & the mixture not getting hard. The way we have to use this product is as follows:
(1) Have several Led fixtures to fill at one time . . . must keep the epoxy flowing or it will set up in the
(2) When done with your filling, remove the nozzle from the package and remove the mixer insert
and then place both the mixing insert and mixing tube in Acetone. Acetone will
dissolve the epoxy and the mixed parts can be used again.
(3) If the nozzle starts to plug up, the ratio of the two parts system does not remain constant and the
epoxy will not set up correctly and will remain soft and sticky. Keep the epoxy flowing at a
constant rate will solve this problem.
May 7, 2015
Rated 1.0 out of 5.0 by TXIslander Worst Loctite product ever!
In theory, this would be a wonderful product. Mixing the epoxy within the nozzle, less mess, and convenient. In reality....leaks at attachment, hardens within the mixing nozzle, and super messy. It worked the first time I used it. Glued two pieces together and set it down to arrange the second pieces for fusing (3 minutes). By the time I was ready to apply the second application, the nozzle was clogged and hardened. I tried opening the clog with a paperclip but it rehardened after about 30 seconds.
Threw the replaceable nozzle away and put on the second one. Same issue after a few minutes. I also noticed that it started to leak at the nozzle attachment which got all ever the tool and my hand. I gave up and threw it in the trash. Don't waste your money on this.
February 13, 2015
Rated 5.0 out of 5.0 by Spyder Great, strong easy epoxy
Previous reviewers clearly didn't follow the very specific instructions on the package and don't understand the concept behind epoxy. Product was viscous like dish soap as it came out of the applicator but firmed in seconds. Like thick putty after a minute, hard to the touch in five minutes. Used it to bond glass to glass, and it adhered firmly to both surfaces. Very strong bond after overnight cure. Mostly clear with a yellow tint; hard, smooth texture like polyurethane. Easiest two-part epoxy ever. I had to use both included applicators because the first one sealed up when I set the unit down for a minute, but the single-use nature of the product mitigates that niggle. Will almost certainly buy again.
March 11, 2014
Rated 5.0 out of 5.0 by Verified Reviewer Excellent Product
This product does exactly what it says. I have used several tubes for various projects and it works great. Remember that each screw -on mixing tube can be used only once and then must be discarded. Also, you must continually move the mixture through the tube or within 30 seconds, the epoxy will thicken and render the mixer unusable. Discard the mixer and seal the dispenser and you can use it repeatedly until you run out of mixers.
September 4, 2014