Model # 1618522

Internet #203156788

Store SKU #184363

Loctite PL 10 fl. oz. Polyurethane Concrete Crack and Masonry Sealant
0079340689374

Loctite

PL 10 fl. oz. Polyurethane Concrete Crack and Masonry Sealant

  • Compliments rough surfaces like masonry and stucco
  • One-time application, resists age hardening
  • No primer required for most materials, Lower installation costs
$5.85 /each

Frequently Bought Together

Product Overview

Loctite PL Polyurethane Concrete Crack and Masonry Sealant is a premium quality, commercial grade sealant developed especially for forming permanent, water and weatherproof seals in all exterior gaps and joints. This sealant is elastic and remains flexible to expand and contract with construction material movement to protect and retain the original seal. Loctite PL Polyurethane Concrete Crack and Masonry does not require a primer for concrete, brick, stone or masonry and resists deterioration from weather, stress or movement. Recommended for repairing cracks in vertical and horizontal surfaces such as concrete walls, foundations and brick and block walls as well as Bonding to concrete, brick, stucco, metal, wood, vinyl, fiberglass and many more substrates.

  • Permanently flexible bond, excellent for expansion joints
  • Weatherproof, withstands harsh environments
  • Does not deteriorate, one time application
  • Paintable
  • Subject to or will include a recycling fee in the following states: CA, OR
  • Click here to learn more about sealant solutions by Loctite
  • Note: Product may vary by store.

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

18 Questions38 Answers

Customer Questions & Answers

PL 10 fl. oz. Polyurethane Concrete Crack and Masonry Sealant
PL 10 fl. oz. Polyurethane Concrete Crack and Masonry Sealant

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
 
7 answers

WHAT CAN I USED TO REMOVE THE CONCRETE CAULK & SEALANT FROM MY HANDS?

This question is from PL 10 fl. oz. Polyurethane Concrete Crack and Masonry Sealant
Asked by
benny
September 11, 2013
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (7)

Asked by
Cleveland,Ohio
Read all my Q&A
Home Improvement Profile: DIYer
October 15, 2015
Answer: 
I use Dish Soap with a small amount of water in it. After I use a putty knife to fill the crack or repair, I dip my hand (with a glove on) or brush into the soap mixture and then over the sealant material allowing (slide) to smooth out nicely! A City Engineer told me about this trick and I was surprised it actually worked great!
-1point
0out of 1found this answer helpful.
Was this helpful?helpful0unhelpful1

Asked by
Appleton Wisconsin
Read all my Q&A
Home Improvement Profile: DIYer
July 23, 2015
Answer: 
Mineral spirits
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
Sacramento, CA
Read all my Q&A
November 15, 2014
Answer: 
First always use gloves. if caulk is on the skin use mineral sprits on a rag to wipe the skin clean; then wash of the mineral sprits with liquid soap and warm water.
+3points
3out of 3found this answer helpful.
Was this helpful?helpful3unhelpful0

August 13, 2014
Answer: 
I used a paper towel to clean my fingers/hands during the job (since I was using my fingers to smooth out some of the sealant), then mineral spirits after I was all done, and it came off easily. http://www.homedepot.com/p/Klean-Strip-1-Qt-Green-Odorless-Mineral-Spirits-QKGO75001/100677235
+6points
6out of 6found this answer helpful.
Was this helpful?helpful6unhelpful0

Asked by
AZ (unfortunately)
Read all my Q&A
Home Improvement Profile: DIYer
October 4, 2013
Answer: 
I think the tube suggests paint thinner/acetone/nail polish remover. Read the fine print on the tube.
+2points
4out of 6found this answer helpful.
Was this helpful?helpful4unhelpful2

Asked by
Salisbury,NC
Read all my Q&A
September 18, 2013
Answer: 
I use a citrus based hand cleaner and it worked for me as I only had a thin film of the concrete caulk on my fingers.
+3points
3out of 3found this answer helpful.
Was this helpful?helpful3unhelpful0

September 16, 2013
Answer: 
Hello Benny,
To get this off of your hands, you will need a heavy duty hand cleaner like Gojo (link below). If it has been on there for awhile and cured you may just have to wait it out.
- Christine
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0
 
3 answers

Can this product be effectively used on concrete roof tiles? We have some joints where the old mo...

This question is from PL 10 fl. oz. Polyurethane Concrete Crack and Masonry Sealant
Asked by
Read all my Q&A
October 24, 2016
Can this product be effectively used on concrete roof tiles? We have some joints where the old mortar has come apart, and might also need sealing from wind-driven rain. No more than 1/2 to 1 inch maximum joint. Thank you!
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (3)

October 27, 2016
Answer: 
It is possible to use the PL Polyurethane Crack and Masonry sealant to make repairs on concrete roof tiles making sure to keep the sealant confined within the joint edges and using backer rod to maintain 2 sided adhesion. Otherwise it is best to use a mortar to replace old mortar on a roof repair.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

October 27, 2016
Answer: 
It is possible to use the PL Polyurethane Crack and Masonry sealant to make repairs on concrete roof tiles making sure to keep the sealant confined within the sealant edges and using backer rod to maintain 2 sided adhesion. Otherwise it is best to use a mortar to replace old mortar on a roof repair.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

October 24, 2016
Answer: 
Yes, this product is compatible.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
3 answers

When can I drive on this?

This question is from PL 10 fl. oz. Polyurethane Concrete Crack and Masonry Sealant
Asked by
Read all my Q&A
October 16, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (3)

Asked by
Cleveland
Read all my Q&A
October 17, 2016
Answer: 
Man this stuff is still tacky after 1 day, I walked on it within in 3 days. Don't rush to drive on this with a heavy vehicle, I'd wait until fully cured within a week to be safe.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
St. Louis
Read all my Q&A
Home Improvement Profile: Professional
October 17, 2016
Answer: 
I would give it at least 24 hours before driving on it.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

October 17, 2016
Answer: 
When can I drive on PL Polyurethane Concrete Crack and Masonry Sealant? The PL Polyurethane Concrete Crack and Masonry sealant may be able to withstand vehicle traffic in as little as 48 hours depending if the sealant was applied within and below the edges of the crack. If sealant is not below the edges of the crack it could take up to 7 days or longer before the sealant can withstand vehicular Read More
When can I drive on PL Polyurethane Concrete Crack and Masonry Sealant? The PL Polyurethane Concrete Crack and Masonry sealant may be able to withstand vehicle traffic in as little as 48 hours depending if the sealant was applied within and below the edges of the crack. If sealant is not below the edges of the crack it could take up to 7 days or longer before the sealant can withstand vehicular traffic. Cure time is about 3mm per day and is dependent upon temperature, humidity and volume of sealant used. This assumes 75° F (24° C), 50% relative humidity, and a joint ½” (13 mm) wide by ¼” (6 mm) deep. Read Less
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
 
3 answers

Sealing gap between concrete steps & foundation

This question is from PL 10 fl. oz. Polyurethane Concrete Crack and Masonry Sealant
Asked by
Read all my Q&A
February 24, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (3)

Asked by
St. Louis County, MO
Read all my Q&A
Home Improvement Profile: Professional
July 4, 2016
Answer: 
This sounds like an excellent application for this product. I used it in a similar application to seal a gap between a sidewalk and foundation and it worked out great.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

February 29, 2016
Answer: 
The Pl S10 can be used to seal between concrete steps and foundation. The maximum depth is 1/2 inch and the minimum is 1/4 inch. The maximum recommended joint width is 1.5 inches.
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0

February 25, 2016
Answer: 
Yes, this product can be used to seal the gap between steps and a foundation.
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0
2 »
  • 2016-10-31 T01:42:20.037-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_203156788, prod, sort_default
2 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 63ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 3.5 out of 5 by 22 reviewers.
Rated 5.0 out of 5.0 by Now This is What I call Caulk! I used this for years but couldn't stand using it......It was so hard to squeeze out. I was tempted to start looking for another caulk. Then I followed one of the other user's advice(thanks Engineer71) and bought the $13 caulk gun. HUH?? what a difference!! The caulk gun actually made this caulk flow out very quick. This stuff turns into an amazing rubber type texture.once cured. I've had some of this caulk in cracks for 2 or 3 years and still going strong.. I've tried several Home Depot products and this by far is the best for concrete. I needed to make some concrete patch around some of the old caulk from 2 years ago, and I couldn't pull this stuff out, I had to cut it out. Now that I have my new caulk gun, this is the only concrete caulk I will purchase from Home Depot. This stuff is very sticky. Anybody have success spreading this with a wet finger? This is the only caulk that I have used that is very difficult and messy to spread with finger. Recently got it on my arm, I did not have Mineral Spirits....ended up using WD-40 followed up by dish soap. Question, is their window/door caulk as superior as their concrete caulk? September 14, 2016
Rated 5.0 out of 5.0 by APPLY HEAT I agree with all others that this does not flow very well. Put it in the oven at 200 degrees for ten minutes and it flows like butter. August 10, 2016
Rated 5.0 out of 5.0 by Good product I've noticed this product got some bad reviews so I thought I would give my thoughts. This stuff is not meant to self level. No where have I read it's supposed to. It says right on the tube allow seven days to cure before painting. I believe the bad reviews this stuff got were due to people not taking the time to read the directions. It is hard to squeeze out of the tube with cheep caulk guns so spend a little extra for a good one. I have gone through a few hundred tubes of this stuff and have yet to find a bad one. I've used it on vertical and horizontal cracks and I have been very pleased with the results. September 23, 2015
Rated 5.0 out of 5.0 by Sealed Large Stucco Cracks in Florida Great product. Worked as expected; however, I did read the data sheet prior to using and followed the instructions/timing of painting and expected rain forecast. July 20, 2016
Rated 4.0 out of 5.0 by Brick mortar cracks Used this product to weather seal some cracks between brick mortar, and I was very pleased. It matched my standard gray mortar very well, and was just the right consistency to work with on vertical surfaces. With latex gloves on, I recommend just using your fingertip to lightly stir the edges to blend, and wipe with a paper towel as you go. This technique worked best for me. I have yet to use this on a horizontal surface, but I would imagine it would best be suited for larger cracks. I feel like a product that is little more viscous would be better for tiny horizontal cracks. September 2, 2013
Rated 4.0 out of 5.0 by Good product but not gray color I just used the sealant today to repair a stem wall that is separating from my house that was not repaired well last year and is failing again. I stuffed the cracks with pieces of foam pipe insulation, then caulked. It did not drip or run so that was great. But the color is very light, beige-like. After several hours I went out and touched a surface and it was still wet. So I expect it to take at least a week to cure. (Package says cannot be painted until 7 days. I will wait 14.) I used a tongue depressor to smooth the joints and that worked well. I just hope it dries to a darker color even though I plan to paint it. It had a nice stickiness and applied easily. Make sure you puncture the tube after cutting the tip. It was not hard to push out of the tube. October 4, 2013
Rated 5.0 out of 5.0 by you won't regret it I used this stuff about 2 years ago putting tile on kitchen wall. This stuff works great. It held 12x24 ceramic tile like nothing. Did not take much. I also used it on gluing counter tops down, and hanging ceiling tile. It takes a bit to dry but it holds almost instantly and not budge. Make sure you have it in the spot you want. Easy clean up with paint thinner. December 2, 2015
Rated 1.0 out of 5.0 by Won't Stick to Surface This stuff works great once it's in place but it's hard to get it to stick to the surface you're filling. It sticks better to your finger or tool. When you try to smooth out the caulk it pulls up. December 20, 2015
  • 2016-10-31 T00:09:19.395-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_22, tr_22
  • loc_en_US, sid_203156788, prod, sort_default
2 >>
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 35ms
  • REVIEWS, PRODUCT