Model # 1390595

Internet #202020473

Store SKU #223222

Loctite PL Premium 10 fl. oz. Polyurethane Construction Adhesive


PL Premium 10 fl. oz. Polyurethane Construction Adhesive

  • Up to 3 times the strength of conventional adhesives
  • Can be applied directly to dry, wet or frozen lumber
  • Stronger than many substrates it joins together
$4.67 / each
If you buy 12 or more
$4.20 / each

Frequently Bought Together

Product Overview

The Loctite PL Premium 10 oz. Polyurethane Construction Adhesive is low in VOC yet up to 3 times stronger than traditional adhesives. It withstands all kinds of weather and bonds to practically any material, making it an ideal all-purpose adhesive for interior as well as exterior projects.

  • Makes super-strong bonds with practically all building materials
  • Recommended for sub-floors and construction joints
  • 100% polyurethane formulation is water- and weather resistant
  • Sets in 30 minutes, cures fully in 24 hours
  • Meets ASTM, HUD and APA specifications as well as state and national VOC guidelines

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.




Warranty / Certifications

More Products With These Features


Customer Questions & Answers

Can this product be used to secure a shower pan liner to concrete floor to smooth it out and keep it drom shifting

Asked by: curjoe
I would think so Never did that always let it dry overnight, will give you a Idea if it will HOLD...
Answered by: Sut
Date published: 2017-02-02

is there a quantity discount?

Asked by: Anonymous
Maybe you could ask them at the contractor counter, but normally, no. A case costs the same per tube.
Answered by: Vegaslights
Date published: 2015-11-05

Will this product hold up the decorative wall paneling (shadow boxes) on drywall?

Asked by: Anonymous
For one, this is a permanent glue, so you'd have to cut it out of your wall, to remove it. Also, it needs clamping for 24 hours, per the instructions. I'd use screws personally.
Answered by: Vegaslights
Date published: 2016-05-13

Can PL 3x be used to adhere a Limestone Hearthstone for a fireplace to cement board?

Can PL 3x be used to adhere a Limestone Hearthstone for a fireplace to cement board?
Asked by: Dave
Yes,,,, But remember once cured nothing can me moved without a Major Project construction!
Answered by: Sut
Date published: 2017-02-12
  • y_2017, m_3, d_25, h_1CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_67
  • loc_, sid_202020473, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 17ms

Customer Reviews

PL Premium 10 fl. oz. Polyurethane Construction Adhesive is rated 4.3 out of 5 by 19.
Rated 5 out of 5 by from Works perfectly (with clamp pressure) PL adhesive is a strong as anything but it is only for certain applications: 1.) Must have excellent-good clamping pressure for strong results. PL fills gaps but the gaps are very weak. Does not fill gaps like epoxy does. 2.) Needs moisture to cure. 3.) Sticks almost as good as epoxy to exotic/oily woods. 4.) On large surface areas, spread with tiny notched trowel. 5.) It is almost impossible to remove from skin. Wear gloves. I built my boat using PL (where I could apply clamp pressure at least!) and would use it again.
Date published: 2016-10-03
Rated 5 out of 5 by from Great Adhesive This product has impressed me every time I've used it. The bond is very strong. The most impressive experience was bonding PVC wainscoting to glossy ceramic bathroom tile & then gluing plastic base moulding to the wainscoting. I used no clamping or weight on the wainscoting but butted cement blocks against the moulding during drying time. The adhesive is very tacky but can be repositioned easily. Reviewers complain about oozing tubes after releasing their caulking gun; this can be reduced or eliminated by making sure to puncture the inner foil seal multiple times to make as large a hole as possible. This keeps oozing to a minimum by not allowing pressure to build in the tube & it makes the end of the nozzle the choke point. I use little Red Cap caulk savers on partially used tubes & the PL stays fresh for months, longer than most cartridge adhesives & caulks. I reused a tube to eliminate a water leak around a concrete wall basement gas pipe.
Date published: 2016-06-13
Rated 5 out of 5 by from For everything inside and out 24 full cure no what the Temp is..Great Product ... For everything inside and out 24 full cure no what the Temp is..Great Product for everything .Must wear gloves and have some paint thinner does not come off shin like most construction CaulK
Date published: 2017-01-16
Rated 4 out of 5 by from Sticky stuff I like this adhesive a lot. It's incredibly strong - especially when you put something where you don't want it... and have to remove it later. Measure thrice, glue once. It is, however, messy stuff. It sticks to everything, requires solvent clean up, and if you leave it on your fingers will take a day or more to wear off. This is compounded by the fact that the tube seems to contain an air bubble - and no amount of careful backing off of the caulk-gun plunger after application will prevent it slowly oozing for another 2-3 minutes. Lay it down on a scrap of something.
Date published: 2012-01-03
Rated 5 out of 5 by from It was a good buy and an excellent adhesive. It was a good buy and an excellent adhesive.
Date published: 2017-02-15
Rated 4 out of 5 by from Better than liquid nails I've noticed that this adhesive doesn't harden in the tube, like liquid nails does, so I don't worry about fighting with this every time I re-use the same tube. Once you get it coming out, it keeps coming out for a long time, even after you back up the caulk gun plunger. This stuff is really slick when wet, and hard to get off of your skin. However, it seems less messy than cheaper construction adhesives. It seems very strong when bonding two pieces together, however by itself, it seems to dry brittle. Clamp time is 24 hours. However, I've removed clamps sooner most of the time, without issue. So far, I'm liking this stuff.
Date published: 2014-05-10
Rated 4 out of 5 by from I LOVE this stuff NOTHING like it! I used this for subfloor. (Worked like a charm.) I've used it to seal air drafts in hidden areas. (Like the time I found mold on an interior/ exterior wall. Sealed the problem) Recently I used it to glue tiny polished river rock to a support beam under a handicapped sink/counter. I have gotten nothing but compliments on the job, the PL color is hidden by the rock. (WARNING you an only do a few rows at a time or things slide off. TAKE YOUR TIME!) Be sure to wear gloves, have a scrap piece of wood to lay the tube on.. and use a small heating pad to warm the tube . It helps the glue to flow better. HAPPY DESIGNING! PS. I also used it on the floor where there were subtle changes in grade for a zero-clearance cricketed shower.If female, five foot nothing me can have fun with this..SO CAN YOU!
Date published: 2013-11-03
Rated 5 out of 5 by from Very strong product!!!! I really liked the strength of this product. I used it on my kitchen sub-floor and it works great! My only concern was: the mess on my might want to keep some "Goof Off" painter wipes close to clean up any mess right away. That way your tools stay clean as well as your hands!
Date published: 2012-04-12
  • y_2017, m_3, d_24, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_19
  • loc_, sid_202020473, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 18ms