Loctite Polyseamseal 10 fl. oz. White Tub and Tile Adhesive Caulk-1675281 - The Home Depot


Model # 1675281

Internet # 203382444

Store SKU # 909329

Polyseamseal 10 fl. oz. White Tub and Tile Adhesive Caulk

Loctite Polyseamseal 10 fl. oz. White Tub and Tile Adhesive Caulk

This item has been discontinued.
The Home Depot no longer carries this specific product.

$4.44 / each


Model # 1675281

Internet # 203382444

Store SKU # 909329

Loctite Polyseamseal Tub and Tile Adhesives Caulk is a premium quality, water-based adhesive caulk that provides a water-tight seal around sinks, tubs and other kitchen and bathroom fixtures. Extra mildewcide is added to fight unsightly mold and mildew growth on the cured caulk. The adhesive strength of Tub and Tile makes it ideal for installing back splashes and repairing loose tiles. Recommended for sealing around bathtubs, sinks, shower stalls tiles and plumbing fixtures.

  • An adhesive and a caulk in 1, can be used for both, bonding and sealing applications
  • Contains BioGuard, an added Mildewcide that prevents the growth of mold and mildew on cured caulk
  • Permanently flexible and durable for a long lasting, professional finish
  • Paintable to match perfectly with surrounding surfaces
  • Low odor, easy soap and water clean-up
  • Water resistant, so ideal for humid and steamy areas
  • Click here to learn more about sealant solutions by Loctite
  • Note: product may vary by store

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.


Individual size (oz.)  10 
Caulk Form  Standard Tube  Caulk Type  Tub & Tile Latex 
Color/Finish  White  Coverage (linear ft.)  30.6 
Cure time (hours)  24  Dry color family  White 
Dry to touch (min.)  30  Fire and high heat resistant  No 
Indoor/Outdoor  Indoor  Longevity (years)  20 
Moisture Resistant  Yes  Mold and mildew resistant  Yes 
Paint Product Type  Caulk  Paintable/Stainable  Yes 
Permanently flexible  Yes  Professional Paint Supplies & Values  Pro Supplies 
Tintable  No 
Warranty / Certifications
Certifications and Listings  No Certifications or Listings  Manufacturer Warranty  N/A 


Rated 2.5 out of 5 by 10 reviewers.
Rated 1.0 out of 5.0 by bad product we replaced our shower surround about 3 months ago and this calking has already started to crack. do not buy this product. December 27, 2014
Rated 5.0 out of 5.0 by Very good stuff I've used Polyseamseal Tub and Tile only a little, in a tub/shower stall, at the point where the tub meets the tiled walls. It went on more smoothly than several other sealants I experimented with, and gave adequate work time to shape and smooth it further, without drying too soon and crinkling as I smoothed it out, as some sealants do. After two years, it still looks new, hasn't discolored, hasn't developed mold, hasn't shrunk, still feels tough, and hasn't come loose at all. Highly recommended. I wish it came in a few more colors though, including a more yellowish color to match a kitchen countertop I'd like to use it on. December 17, 2013
Rated 4.0 out of 5.0 by Good Stuff This stuff is good because it is versatile. It can be used in the bathtub as well as drier areas. Wherever any caulk is being replaced though, the absolute imperative need to do thing is to make sure the place that is getting the caulk is not only clean, but more importantly, that it is dry. Installing any kind of caulk to a seam that has had water soaking it needs to dry completely. If you install it with too much moisture present behind the surface, caulks will not ever fully dry because they dry from the top or outside to inside. If too much latent moisture gets trapped behind that curing barrier it will eventually force its way out, bubbling that short lived nice looking caulking job you did. So how do you get all that moisture out? Use a leaf blower on high setting for about fifteen minutes. No don't do that, just kidding, use a hair dryer until you think it is dry. NOOOO don't do that either. Do this though, get some denatured alcohol when you are buying your caulk, it is very near the same place. Only use denatured because it has 0% water added to it. Put some denatured onto a rag that is lint free while wearing any kind of gloves like nitrile or latex gloves and sop the places you cleaned and are going to put any new caulk on. Then take another clean dry cloth and wipe up anything wet. The alcohol will bind with the water and excess moisture better than anything else and most of it will evaporate away before you get the chance to dry it with that dry rag. Double check once more for any wet looking spots and if it looks clean and dry, caulk away. Depending on how your caulk cures you can clean up any booboos with either a water moistened rag or a rag moistened with mineral spirits. October 23, 2013
Rated 5.0 out of 5.0 by Great product - Been using for over 10 years I am a contractor and have been using this product regularly for over a decade. With proper surface preparation, Polyseamseal will perform as indicated by the company. It is easy to work with, easy to clean up, and has excellent adhesive qualities. October 8, 2013
Rated 1.0 out of 5.0 by Messy Messy. Won't stop running out of a dripless caulk gun so causes lot's of waste. Otherwise ok. November 18, 2014
2 >>


Store Exclusive. This item is available for purchase in select stores only.