Model # LTPDC2000D

Internet #205451124

Lotos 50 Amp Plasma Cutter with Pilot Arc, TIG Welder and Stick Welder Combo


50 Amp Plasma Cutter with Pilot Arc, TIG Welder and Stick Welder Combo

  • Lightweight design
  • Durable and dependable
  • Suitable for a wide range of projects
$553.00 /each

Frequently Bought Together

Product Overview

As one of the largest manufacturers of plasma cutting, TIG/stick, arc (MMA) welding equipment in the world, Lotos Technology offers the LTPDC2000D multi-purpose unit that provides a variety of welding and cutting functions. It is able to cut all types of metal up to 1/2 in. with the 50 Amp plasma cutting function. With a hand carrying weight at 32 lbs. The unit is portable and reliable featuring a duty cycle of 60% at max amp for all functions.

  • Combines plasma cutting, TIG/stick and arc welding functions in 1 machine
  • Plasma cutter with pilot arc allowing for cutting of painted and rusty metal
  • Robust infineon (by Siemens) IGBT power drive matrix
  • Dual voltage 110/220-Volt AC (50 Hz/60 Hz)
  • Portable hand carry machine weighs 32 lbs.
  • Cuts metal up to 1/2 in. with 50 Amp plasma cutting function
  • TIG/stick and arc (MMA) welding function
  • Click here for more information on Electronic Recycling Programs

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.




Warranty / Certifications

More Products With These Features


Customer Questions & Answers

does the machine come with a 110 plug as well as a 220

do i have to buy a 220 to 110 converter cable
Asked by: brett
Yes, it comes with both 110V and 220V plugs I believe.
Answered by: JamesPrattOK
Date published: 2017-02-07

how thick of steel will this cut?

Asked by: Landlord
I have clean cut 1/4 and severance cut 4 in well pipe with a 7/16 wall but with the amps this unit Puts out you should be able to clean cut 3/8 th`s or severance cut larger (not clean cut)
Answered by: Bad406camaro
Date published: 2017-01-16

What is the Amps required for this unit?

I see that it requires either 220v or 110v but what is the required Amps for the 220v service?
Asked by: Tony
I am running mine on a 20 amp 220V circuit. I think 15 amp would be minimum. You can download the user manual at Lotos web site.
Answered by: JamesPrattOK
Date published: 2017-02-07

Does this come with more than 1 ceramic insulator for the cutting tips

Asked by: BLM
If I remember correctly it came with a couple of ceramic insulators, but I could be wrong. I just purchased their consumable pack of 30 for a great price so I don't worry about it. When I was first learned I was going through quite a few consumables, but now I get pretty decent life out of them.
Answered by: JamesPrattOK
Date published: 2017-02-07
  • y_2017, m_3, d_24, h_14CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_15
  • loc_, sid_205451124, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 25ms

Customer Reviews

50 Amp Plasma Cutter with Pilot Arc, TIG Welder and Stick Welder Combo is rated 3.8 out of 5 by 25.
Rated 5 out of 5 by from Giving this PRODUCT a 5 star review for Operation and Quality. EVERYTHING ELSE ABOUT THE TRANSACT... Giving this PRODUCT a 5 star review for Operation and Quality. EVERYTHING ELSE ABOUT THE TRANSACTION WAS A NEGETIVE -1 STAR. The box was open when i recieved it from the Pick up counter at My local home depot. This set off alarms bells. I asked the service rep she told me it was opened by receving to verify contents. Acepted this and took it home. I installed a 220 v 50 amp dedicated outlet for this welder. I used 6-3 wire between the main box and the sub box (about 15 inches main box through wall into sub box on other side of wall. I made a 110 to 220 adapter with 8-3 wire and twist lock connectors to match the 50 amp twist lock on the sub panel. ############# UNBOXING################ When i unboxed the welder i found it well packaged the welder had minor scratches but no dents. The unit apears brand new other then the small acratches (not a issue for a garage use item). When i Lined up all the accessories i found NO TIG ACCESSORIES. The tig torch was clean but clearly used with scratches and scrapes. There were no tungston no end caps no tungston holders and no holder collet. This has effectivly made the Tig unuseable intill i can buy some ( NOT HAPPY). The Plasma torch had accessories (packaged in a bag of screws and fittings so it easy to miss at first) The torch it`s self was clean but also clearly used with a new ceramic cup, eletrode and Plasma chamber. The Plasma torch has a nice Long cable with a pastic protection sheath. I will install a leather Protector as soon as i get to town to buy one. The handle has scuffs on side from being drug along a cutting guide This indicates Prior use. The Stick stinger apears new with no issues. The ground and stinger are to short for my liking. Again as soon as i can i will buy a longer stinger and Ground clamp ################OPERATION################ Plasma cutter I set up the Air dryer and regulator (very easy) and set regulator to 40 psi. I did verify air flow with the 2.5 second and the 5.0 second settings and found it accurate. My first cut was a very rusty 1/4 in mild steel place It was 24x24. I marked it into Nine squares 8 x 8 inches. Using a cut guide the first cut at max amps (49 per display) was clean and with fair cut speed (about 24 inches in less then 1 and 1/2 minutes. this is not bad at all for a 50 amp cutter on very rusty metal. The Pilot arc started first try. Second cut i rolled back the amps to 40 and found a decient cut but much slower. I also promptly cut through the wire stand off on the second cut (my fault) I fashoned several replacements later using a coat hanger wire. In the end i set the amps back to max for the remaning cuts. ending with 8 plates 8x8 inches. I did let the machine cool (soda brake) mid way but not becuase of machine issue. I did also reset cutting guide also giving the machine a brake between cuts. In general very impressed with plasma cutting operation A+ for tig ############################### Stick welding##################### Using 1/8 and 3/32 7018 on the same rusty steel i found excelent start at 50 amps with the 1/8 AND the 3/32. Other then the short leads the stick works well with small sticks. B- for stick because short ground cable was a issue ###############################Tig############################## Not happy i had to borrow a cup collet and tungston from a friend with a Lotos welder as no other common tig parts fit this torch and mine were missing. The tig H/F start works excelent with same ease as my Miller i used at work. The tig is not water cooled so the torch feels small/light but that is just my opinion. Easy arc starts at low amps. Used up to 120 amps with 1/8 308 rod on a peice of 3/8 plate stainless scrap (no back side argon) and it held a stable smooth short arc. B+ for tig ################################################################ I will be addressing the Tig parts issue with Homedepot.
Date published: 2017-01-16
Rated 1 out of 5 by from Purchased this unit after shopping for a 50 amp Pilot arc plasma cutter. Originally ordered Pilot... Purchased this unit after shopping for a 50 amp Pilot arc plasma cutter. Originally ordered Pilot arc cutter from home depot in the store. When it was delivered to the store it was a non Pilot arc unit. I refused to take delivery. I did get a refund for the incorrect unit but i am now waiting for refund on extended warranty. When i tried to get them to order the correct unit i was told they were out of stock and it was not available online. OK so I coughed up a additional few hundred dollars for this unit. Now I am considering returning this unit. Clearly used / repaired refurbished. No Tig accessories in package as shown in Pictures. Only came with One plasma cutter ceramic cup. Plasma cuter torch was used with scratches and scrapes. Stick stinger was also used with burn marks. All parts were cleaned up but clearly used. Heavy air leak from barb fitting on back of machine. tightening it up did the trick. The regulator inlet and outlet are NPT the fittings shipped with the machine are SAE(can you say leak) After buying correct fittings I finally did not have any more leaks. As for operation I was unable to use tig as there is no accessory Kit. Stick leads are short but work well. Stick holder is very stiff but well constructed. Plasma cutter severed 1/4 rusty steel plate with ease. I have regulator set on 40 psi and Plasma stream is ok with a bit of slag. Slow or fast cut the slag build up is the same indicating a need for more air pressure. Tomorrow I will try tig after borrowing a friends Tig accessories from his Lotos welder.
Date published: 2017-01-16
Rated 1 out of 5 by from false advertisement After receiving noticed regulator was missing called home depo and they contacted lotus who then sent a cheap regulator and not the one advertised we then called home depo again and they contacted lotus who then informed us that the regulator advertised is no longer being made and that it was actually an old picture. Old picture?to this day home depo is advertising it So basically not only were there air leaks something i could overlook but lotus and home depo will take your money advertise one thing and sell you another. Horrible horrible customer service and practice save your money dont buy anything from home depo on line you're not gonna get what you thought you paid for.
Date published: 2016-12-23
Rated 5 out of 5 by from I soooo recommend this bad boy!!!! I bought mine a few months ago. After reading some old reviews i didnt know what to expect. I bought through home depot so i had a local store to return it to. I wired up a 240v outlet in my garage, with help from the HD folks, to get the most juice i could to it. I also bought a 30gal husky air compressor to feed the plasma cutter. Woo hoo!!!! It cuts anything and everything I've thrown at it--including railroad track!!! Of course, over the recommended maximum thickness it isn't a pretty cut and it uses a lot of consumable in those cases, but it does the job. I just love it love it love it. Get one. But be safer than me. I dont always wear long sleeves or pants and sometimes get burned. Ouch. Nevertheless, this bad boy is so much fun my wife gets jealous.
Date published: 2016-10-30
Rated 4 out of 5 by from Good machine Took a while to get the 220v ran but it runs really well now. So so using 110v but worked. Plasma cutter cuts like a champ and very impressed with tig. First time using a tig welder and laying down some really good beads so far with good penetration. Need to get a 3way ball valve to split the argon and compressed air to makeep things easier. Looks like Lotos sells these as well but haven't got yet but definitely recommend. All in all, good machine.
Date published: 2016-12-30
Rated 1 out of 5 by from Product came delivered to the h.d. just in time, when I got it out of the box it seemed as if it ... Product came delivered to the h.d. just in time, when I got it out of the box it seemed as if it had been used before, I had to use my own air line fittings because the provided ones kept leaking. About a week later I started using the plasma torch to to make a metal bumper, the pilot Arc started going in and out and eventually after about a day of cutting it completely quit. I've noticed that the unit would hesitate to restart once the on button was switched. Or it would go off on its own and then restart, 2 Days Later when I came to turn it on again it would just go in and out with a clicking noise. I never got to try that tig or stick so I can't comment on that. Decided to return it to Home Depot. The person over the phone was really helpful in fact they were able to help me upgrade to an Everlast 3 in 1 super ultra 205.... ill give my review on that one once I get it.
Date published: 2016-12-13
Rated 4 out of 5 by from This product is sold as 50 Amp- but comes with only a 30 Amp plug on it. Created all kinds of iss... This product is sold as 50 Amp- but comes with only a 30 Amp plug on it. Created all kinds of issues and additional work, but after all of that, real happy with plasma cutter. Not used TIG or Stick yet, so partial review. Happy with machine, just don't know why they'd put 30 amp plug on 50 amp machine.
Date published: 2017-02-07
Rated 4 out of 5 by from I first purchased a LTP2000 plasma cutter. Had some warranty problems with it and Home Depot was ... I first purchased a LTP2000 plasma cutter. Had some warranty problems with it and Home Depot was GREAT to deal with. They swapped it out for this unit for the same price. I have only used the Plasma Cutter function of this unit but it works great. I wish Lotos had a better way of keeping the plasma torch head from touching the metal when cutting. The little wire standoff thingy pretty well sucks, especially compared to better units. As far as cutting and consumables and cost, this unit is great. Cuts just fine, pilot arc works great. The ground lead is WAY too short, which is goofy because the plasma cutting and TIG torch leads are plenty long, but the ground lead is just too darn short. I had to create my own that was the same length as torch lead. Overall I am very happy with the plasma cutting function of the unit, especially for the price, and Home Depot's warranty and services makes this a safe bet. I would prefer to have a Lincoln or Miller or Hypertherm plasma cutter, but they are three times the price of this unit and this one does what I want just fine.
Date published: 2017-02-07
  • y_2017, m_3, d_25, h_2
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_25
  • loc_, sid_205451124, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 88ms