Model # MS-OPS2-HT

Internet #203753993

Lutron Maestro 2-Amp Single Pole Occupancy Sensing Switch - Hot
0027557982665

Lutron

Maestro 2-Amp Single Pole Occupancy Sensing Switch - Hot

$26.97 /each

Frequently Bought Together

Product Overview

Let Lutron’s Maestro Occupancy Sensor switch turn the lights on and off for you. It’s a simple, easy, and low cost way to save energy and add light automation to your home. Install a Maestro Sensor and lightsautomatically turn on when you enter the room, and then automatically turn off after you leave. This sensor features XCT Sensing Technology which detects fines motion, such as typing at a desk or reading, ensuring lights do not turn off inadvertently. Equipped with ambient light detection, you can customize your sensor to detect daylight so lights don’t turn on with enough natural light in your room. Keeping the sleek design of the Maestro family, Lutron sensors will match the decor of any room in your home. Install it in the laundry room for added convenience when your hands are full, or in the kids’ rooms and never worry about lights being left on by mistake. Maestro Sensors works with any bulb type, including CFLs and LEDs. This switch can also be easily programmed to function as a vacancy (manual-on) sensor.

  • Includes (1) 2-Amp sensor switch; coordinating wallplate sold separately
  • For use with all bulb types up to 2-Amp, single-pole applications
  • Automatically turns lights on and off based on room occupancy
  • Uses advanced XCT sensing technology, offering the most reliable on/off performance up to 30 ft.
  • Programmable time-out of lights – at 1, 5, 15 or 30 minutes
  • Great for small rooms like laundry rooms, closets and bathrooms
  • Requires ground wire
  • Simple, easy, and low cost way to bring light automation to your home
  • Programmable time-out of lights - 1, 5, 15, or 30 minutes
  • Single-pole only



  • Click here for more information on Electronic Recycling Programs

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

can this switch be use LED lights

can this switch be use LED lights
Asked by: A13879
Yes, but with a maximum of 150 watts total.
Answered by: mrfan10
Date published: 2016-11-09

can this work three lightbulbs?

I am putting this in my garage which has light bulbs all controlled by single switch. will this work if all bulbs together are under 250W?
Asked by: kenny
Yes
Answered by: RAPTOR555
Date published: 2017-02-01

Can I use with voltage 220 V ?

because I need to use it at Europe
Asked by: Amidaphat
no
Answered by: Bill
Date published: 2017-01-09

I want to install in the bathroom so my grandson doesn't need someone to turn on the lights but will it go on if my cat goes in there?

Sometimes my cat will go in there to sit on the heat register to stay warm. I am wondering if the light will come on when she goes in there. Also what is the different amps mean?
Asked by: Pkmc
it is a motion sensor. any movement will trigger it to operate.
Answered by: Bill
Date published: 2017-01-05
  • y_2017, m_2, d_19, h_4CST
  • bvseo_bulk, prod_bvqa, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_60
  • loc_, sid_203753993, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 68ms
  • QUESTIONS, PRODUCT

Customer Reviews

Maestro 2-Amp Single Pole Occupancy Sensing Switch - Hot is rated 4.4 out of 5 by 232.
Rated 5 out of 5 by from Easy to install. Extremely convenient. I purchased this light switch for our laundry room because the light was constantly being left on. This switch solved that problem immediately. Not only does the light in the laundry room come on automatically now when you walk in, but it automatically turns itself off after 1 minute, which is even better. No more wasted electricity!! The switch settings are also easy to adjust ... you just have to follow the included instructions and press the right buttons and pay attention to the flashing lights that indicate which setting is in effect.
Date published: 2016-08-25
Rated 1 out of 5 by from Seems to reprogram itself I installed it just fine and it does work, but it seems to change its programming on its own depending on how long it senses motion. For example if I set it to turn off 5 minutes after I leave the room and I just go in and out of the room and stay for a brief amount of time it works fine. But if I happen to stay in the room for a while, say 30 minutes, the light will stay on permanently after I leave until manually turned off. I have reprogrammed it about 20 times. Maybe I got a bad one because it does not seem to work as advertised. I will try a different brand after bringing this one back.
Date published: 2016-08-27
Rated 5 out of 5 by from This is a great little switch -- works exactly as expected for occupancy mode (have not tested ot... This is a great little switch -- works exactly as expected for occupancy mode (have not tested other modes). I'm using it in a home office, and normal movement while sitting in a chair using a computer seems to be enough. I didn't change the factory defaults (5-minute timeout) and so far have only had it shut off once while still in the room. When it turned off, all I had to do is lean in my chair a bit, and it turned on again right away. I'm very happy with the turn-on speed and sensitivity of the motion detection, however I think this should be packaged with the snap-on wall plate. If I could deduct half a point for that I would, but the product is excellent.
Date published: 2016-11-29
Rated 4 out of 5 by from Installation: Easy to install. Took just a few minutes to install each one. Likes: I like the... Installation: Easy to install. Took just a few minutes to install each one. Likes: I like the multiple settings for how long the light will stay on - 1 minutes, 5 minutes, 15 minutes, etc. The switch does do what I want. I installed in the laundry room, workshop and pantry. All rooms I tend to enter with full hands. Dislike: I found the setting instructions for use a little vague but went on line and found a good youtube video to help with the settings. I installed the three two days ago so no idea how long they will work.
Date published: 2016-11-08
Rated 5 out of 5 by from This motion sensor switch performed just as I had hoped it would. I have used it in my garage, wh... This motion sensor switch performed just as I had hoped it would. I have used it in my garage, which has two on/off switches. I installed this occupancy sensing switch near the entry door. I wasn't sure how it would work just replacing one of the two switches, but I went ahead and connected the two hot wires (black and red)together to one of the black wires on the switch and the neutral wire (white) to the other black wire on the switch. I then connected the green wire to the ground wire in the j-box. It worked perfectly- first time! I did not bother setting the time interval for the switch to automatically turn off after the occupant leaves the garage because it does not matter to me if its 10 minutes or 30 minutes. I love being able to enter the garage and have the lights click on instantly! Same as I get out of my car after arriving at home. Thoroughly delightful.
Date published: 2016-11-09
Rated 5 out of 5 by from I've had this in my kitchen for several years now. No single hiccup for all that time. It operate... I've had this in my kitchen for several years now. No single hiccup for all that time. It operates 4xT4 fluorescent lights. No issue with powering up the lights or with the light ballast. Very good quality. I love the programmable features on it and the auto-learning of your light preference. Very versatile.
Date published: 2016-12-03
Rated 5 out of 5 by from Nothing like hands free light control Simple to install. Easy to reprogram if necessary. And a delight to use. No more hunting for a light switch or forgetting to turn one off. Entire homes should have technology like this. At least older homes can participate too.
Date published: 2016-09-27
Rated 5 out of 5 by from It was quick & simple to install and program! My... It was quick & simple to install and program! My wife was happily surprised and loves the convenience of the automatic on/off light while I get to enjoy a lower electric bill!
Date published: 2017-01-18
  • y_2017, m_2, d_18, h_22
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_232
  • loc_, sid_203753993, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 64ms
  • REVIEWS, PRODUCT