0784276013871

Lutron

Model MS-OPS2H-2-WH

Internet #203415835

Maestro Single Pole Occupancy Motion Sensing Switch - White (2-Pack)

$37.59 /each
Color/Finish: White
  • Light Almond
  • White

Frequently Bought Together

Product Overview

Let Lutron's Maestro Occupancy Sensing Switch turn the lights on and off for you. This 2-pack of Lutron's Maestro Occupancy Sensing Switches is a simple way to save energy and add light automation to any room of your home. Install a Maestro sensor, and lights turn on when you enter the room and turn off automatically after you leave. This sensor features XCT sensing technology that detects fine motion, such as typing at a desk or reading, ensuring lights do not turn off inadvertently. Equipped with ambient light detection, you can customize your sensor to detect daylight so lights don't turn on with enough natural light in your room. Install one sensor in the bathroom and one in the laundry room for added convenience and energy savings. Maestro sensors work with any bulb type, including CFL and LED, and they match the rest of Maestro's product family line (sold separately) to give you a complete and coordinated look in your home.

  • Coordinating Claro wall plates and accessories are sold separately
  • Package includes 2 Maestro occupancy-sensing switches
  • Automatically turns lights on and off based on room occupancy
  • Uses advanced XCT sensing technology, offering the most reliable on/off performance up to 30 ft.
  • Works with all bulb types
  • Senses daylight, so lights don’t turn on inadvertently (optional feature)
  • Can be switched to vacancy mode (manual-on, auto off)
  • Great for small rooms like laundry rooms, closets and bathrooms
  • Simple, easy and low-cost way to bring light automation to your home
  • Sleek design of Maestro controls
  • Programmable time-out of lights – at 1, 5, 15 or 30 minutes
  • Up to 250-watt incandescent, halogen, electronic low voltage; 200-watt magnetic low voltage; 150-watt CFL/LED; 2 amp ballasts
  • Single-pole only
  • No neutral wire required



  • Click here for more information on Electronic Recycling Programs

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

14 Questions45 Answers

Customer Questions & Answers

Maestro Single Pole Occupancy Motion Sensing Switch - White (2-Pack)
Maestro Single Pole Occupancy Motion Sensing Switch - White (2-Pack)

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
This question is from Maestro Single Pole Occupancy Motion Sensing Switch - White (2-Pack)
 
10 answers

Does this work with LED dimmable bulbs?

This question is from Maestro Single Pole Occupancy Motion Sensing Switch - White (2-Pack)
Asked by
Read all my Q&A
December 5, 2014
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (10)

Asked by
Canton, OH, USA
Read all my Q&A
Home Improvement Profile: DIYer
May 7, 2016
Answer: 
yes
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Brooklyn, NY
Read all my Q&A
April 26, 2016
Answer: 
Hi Deed,
The switch works with all light bulb types; however it is not a dimmable switch. It's either on or off.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Coppell, TX
Read all my Q&A
Home Improvement Profile: DIYer
October 27, 2015
Answer: 
This not a dimmer light switch, it turns the light on when you enter the room and turns it off after you leave the room.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Coloado
Read all my Q&A
Home Improvement Profile: DIYer
October 23, 2015
Answer: 
Yes but it will only turn them on and off.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
California, USA
Read all my Q&A
August 19, 2015
Answer: 
Yes, I have used this switch with dimmable LED bulbs in my bathroom.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
St. Louis, Missouri
Read all my Q&A
Home Improvement Profile: DIYer
August 19, 2015
Answer: 
Yes. I am currently using this switch with LED Dimmable lamps, and it works perfectly.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Atlanta, GA, USA
Read all my Q&A
May 12, 2015
Answer: 
It is a non-dimming switch. It works with LED bulbs and does not offer dimming. No special dimming bulbs required.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Rosenberg, Texas
Read all my Q&A
Home Improvement Profile: DIYer
February 10, 2015
Answer: 
Yes, it will work with LED bulbs, but you cannot dim it with this sensor. This sensor is intended to turn light ON and OFF
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Read all my Q&A
December 9, 2014
Answer: 
Yes! This sensor is compatible with all bulb types, including dimmable LED's and dimmable CFL's.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Anonymous
Coatesville, PA
Home Improvement Profile: DIYer
December 8, 2014
Answer: 
Yes, but these don't dim. On or off.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
This question is from Maestro Single Pole Occupancy Motion Sensing Switch - White (2-Pack)
 
6 answers

Doe it require a neutral wire?

This question is from Maestro Single Pole Occupancy Motion Sensing Switch - White (2-Pack)
Asked by
New Jersey
Read all my Q&A
May 13, 2016
does this require a neutral wire to function?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (6)

Asked by
columbus ohio
Read all my Q&A
Home Improvement Profile: DIYer
July 3, 2016
Answer: 
This switch has three wires you need to attach. One is the ground wire, which is green. And the other two wires are black. One goes to the HOT wire from your circuit breaker and the other black wire goes to the lights you wish to control. You do not need to mess with a neutral wire installing this switch, assuming your house is up to code and your neutral wire is already in place. Also, on this switch, Read More
This switch has three wires you need to attach. One is the ground wire, which is green. And the other two wires are black. One goes to the HOT wire from your circuit breaker and the other black wire goes to the lights you wish to control. You do not need to mess with a neutral wire installing this switch, assuming your house is up to code and your neutral wire is already in place. Also, on this switch, you do no have to know which black wire is which, Lutron makes it very easy to install. Read Less
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Rosenberg, Texas.
Read all my Q&A
Home Improvement Profile: DIYer
May 15, 2016
Answer: 
No neutral wire required
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Canton, OH, USA
Read all my Q&A
Home Improvement Profile: DIYer
May 15, 2016
Answer: 
NO IT DOES NOT REQUIRE A NEUTRAL WIRE
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Anonymous
Coatesville, PA
Home Improvement Profile: DIYer
May 14, 2016
Answer: 
The description says "No neutral wire required". I would say that's a "no".
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

May 14, 2016
Answer: 
Yes, a neutral wire is required.
-1point
0out of 1found this answer helpful.
Was this helpful?helpful0unhelpful1

Asked by
St. Louis, Missouri
Read all my Q&A
Home Improvement Profile: DIYer
May 14, 2016
Answer: 
Yes. I just installed 2 of them about an hour ago, and one wasn't functioning properly. When I removed it from the wall, I found that the neutral wire had slipped out of the wire nut. Once tightened and reinstalled, the switch worked perfectly.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
This question is from Maestro Single Pole Occupancy Motion Sensing Switch - White (2-Pack)
 
6 answers

Can this control a bathroom light and exhaust fan?

This question is from Maestro Single Pole Occupancy Motion Sensing Switch - White (2-Pack)
Asked by
California
Read all my Q&A
August 18, 2015
Looking to add this to a bathroom in a common pool area that everyone forgets to turn off. Wondering if it can simply replace the old broken timer we have in there now that controls a fluorescent and exhaust fan?

Thanks!
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (6)

Asked by
Canton, OH, USA
Read all my Q&A
Home Improvement Profile: DIYer
May 16, 2016
Answer: 
YES IT CAN.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Coppell, TX
Read all my Q&A
Home Improvement Profile: DIYer
October 27, 2015
Answer: 
yes
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Coloado
Read all my Q&A
Home Improvement Profile: DIYer
October 23, 2015
Answer: 
Yes. The electronics operate a relay so it is just like a switch. It has a wattage limit but with a light an bath fan you should be ok.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Knoxville , Tennessee
Read all my Q&A
August 25, 2015
Answer: 
Yes, if you want both the light and fan to turn on and off at the same time. I installed mine to turn on the light of a bath light/fan unit and installed a separate manual switch to turn the fan on and off. However, I could have hooked both the light and fan feed wires to this device.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
St. Louis, Missouri
Read all my Q&A
Home Improvement Profile: DIYer
August 19, 2015
Answer: 
Yes, this should work fine as long as the combined wattage of the fluorescent fixture and the exhaust fan do not exceed 200 watts. This particular set has a 2 amp load capacity per switch; if you need to control devices using more power than this, you should look at the higher amperage versions of this switch that are available at Home Depot. I've used this particular set in my bathroom to control LED Read More
Yes, this should work fine as long as the combined wattage of the fluorescent fixture and the exhaust fan do not exceed 200 watts. This particular set has a 2 amp load capacity per switch; if you need to control devices using more power than this, you should look at the higher amperage versions of this switch that are available at Home Depot. I've used this particular set in my bathroom to control LED lighting and an exhaust fan, and it works just fine. A typical exhaust fan an a single 4-foot fluorescent dual-tube fixture should be within spec for use with a single switch.
What you mention is a perfect use for the switches. I've also installed the 5 amp version of this switch to control a series of fluorescent lights in our clubhouse basement, where the bathrooms are located, as these lights were always left on in the past. Now, when someone steps in the door to use the restroom or phone, the lights come on automatically and shut off 15 minutes later. Read Less
+5points
5out of 5found this answer helpful.
Was this helpful?helpful5unhelpful0

Asked by
Anonymous
Coatesville, PA
Home Improvement Profile: DIYer
August 19, 2015
Answer: 
That would be super. Only consideration would be to not exceed wattage rating of the control.
Mine controls four twisty bulb fluorescent fixtures in my garage. Works great with fluorescent lighting. If yours is a typical residential bath exhaust fan and the light is the one in the fan housing you will have no issue keeping under the wattage limits.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
This question is from Maestro Single Pole Occupancy Motion Sensing Switch - White (2-Pack)
 
3 answers

Why can't it be used to switch outlets?

This question is from Maestro Single Pole Occupancy Motion Sensing Switch - White (2-Pack)
Asked by
chicago
Read all my Q&A
August 4, 2016
What if I want to turn on and off LED lights that plug into outlets? Is this only because someday someone might plug something super load intensive in?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (3)

Asked by
Rosenberg, Texas.
Read all my Q&A
Home Improvement Profile: DIYer
August 6, 2016
Answer: 
This switch is rated for 2 Amps and the outlets are usually 15 or 20 amps.
If you use the switch to for the outlets, you or somebody else can overload it and kill the switch. It may cause an electrical fire hazard.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Canton, OH, USA
Read all my Q&A
Home Improvement Profile: DIYer
August 6, 2016
Answer: 
It could be used to switch a outlet
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Brooklyn, NY
Read all my Q&A
August 5, 2016
Answer: 
I think you've answered your own question.
I've seen many wall switches that operate an outlet for a table lamp, etc.
But, you can certainly do that; knowing the power ratings of the switch: Up to 250-watt incandescent, halogen, electronic low voltage; 200-watt magnetic low voltage; 150-watt CFL/LED; 2 amp ballasts.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
2 »
  • 2016-09-08 T13:36:38.731-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_203415835, prod, sort_default
2 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 74ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 4.6 out of 5 by 108 reviewers.
Rated 4.0 out of 5.0 by Senses motion well, tuns on at too high a light level I bought this switch to replace another motion sensing switch that did not work with LED bulbs. This switch senses motion perfectly. The other switch would turn off prematurely while I was still in the room and not moving much. In the 2 months I have used this switch, it has never turned off on me prematurely. The only problem I have with the switch is that it turns on even when light levels are sufficient. The instructions say that the switch is a learning switch and if you turn it off within 5 seconds of activation it will learn your preferences for light level. This does not seem to work. I have not called the manufacturer on this issue. June 28, 2016
Rated 5.0 out of 5.0 by Does an awesome job of managing lights in a room where we need automatic illumination Easy to install and use. Just install, screw in, and start using. Nothing to it. Works without a fuss. Saves me time while going to the garage or laundry room. Lighting when and where you need it, and no worries on who will turn it back off. August 18, 2016
Rated 3.0 out of 5.0 by only good for low powet This is rated 2 amps. Thats 240 watts or roughly 2 or 3 bulbs of 100 watts each. I use it in a closet and a bathroom with one fan and one bulb. Its good... But dont use it in a room with lots of bulbs of a big chandeliet. July 28, 2016
Rated 4.0 out of 5.0 by Good product, does the job. This 2-pack saves money. This switch detects motion fine. The timer and occupancy/vacancy work fine. The only annoying part is that the control is behind the cover plate. So, you need to remove the cover plate each time you want to change the setting. June 24, 2016
Rated 4.0 out of 5.0 by Good to have It is awesome product, works well and very useful to save energy. June 24, 2016
Rated 5.0 out of 5.0 by Great timesaver The switch was easy to install and also easy to adjust. I installed many in my home. July 5, 2016
Rated 5.0 out of 5.0 by How to spoil your wife. We remodeled our bathroom and I wanted to add a bit of automation. I put the fan on a timer and the lights on one of these. They work perfectly. I have it set for a 5 minute off delay. It turns on the lights as soon as we walk in and turns off 5 minutes after we leave. It requires access to a neutral wire and a safety ground wire. Make sure those are available in the wiring box. The only down side is when we travel. If my wife gets up to go to the bathroom during the night she does not turn off the bathroom light when she is done. I know, a first world problem. ;-) May 6, 2016
Rated 4.0 out of 5.0 by Nice switch Install was a breeze and the ability to change the settings is straight forward and simple. June 24, 2016
  • 2016-09-08 T15:45:16.634-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_108, tr_108
  • loc_en_US, sid_203415835, prod, sort_default
2 3 4 5 >>
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 34ms
  • REVIEWS, PRODUCT