Rated 3.8 out of 5 by 14
Rated 5.0 out of 5.0 by mrlarryb Great Dimmer
This dimmer has a full range of change set at the factory. It also has provisions to make adjustments for varying circumstances based on what type of bulbs are used with the dimmer. Works great with LED's, especially more than one on same circuit. Works well with incandescent bulbs. Did not try with CDL's.
June 16, 2016
Rated 5.0 out of 5.0 by Mack CFL-LED Dimmer switch
Easy to install and works great. This was a replacement for my old dimmer switch, which was the push and turn knob type.
May 27, 2016
Rated 2.0 out of 5.0 by r8486 Too Large for Standard Boxes
The switch depth is extreme and will not fit in a standard electrical box. Had to to replace the box which made the entire installation much more difficult and time consuming.
March 29, 2016
Rated 4.0 out of 5.0 by Bud the product fits the purpose.
I came to Home Depot after returning a similar product to a hardware store. The expertise and help in answering my questions were what helped me to make the decision to make the purchase. The light switch will work with CFL or incandescent bulbs, the instructions were easy to follow and installation went smoothly.
October 6, 2015
Rated 1.0 out of 5.0 by CedarHillReno Too many problems
We renovated and added about 18 of these dimmers. We ended up returning about 5 of them as they were defective. I bought them because Lutron is supposed to be a reputable brand, and they were not the best value. With a 27% failure rate is not acceptable from any company! Not happy with them, but we are to far into the process of he renovation to change them out at this point.
December 10, 2014
Rated 1.0 out of 5.0 by foggymtnbreakdown There is a delay with my 2 incandescent bulbs
I replaced a working switch in my bathroom with this switch because I wanted a dimmer switch. I chose this one because I am gradually replacing the incandescent bulbs in my house with LEDs. There is just one switch in the circuit and this is it. There are just 2 incandescent light bulbs. That is it. It is tough to miswire that. There is an appreciable delay between when I throw the rocker switch and when the bulbs light up. It is the only switch inside my house or outside that does this. I hate it. I have never gotten over the delay. It may work OK for CFLs and LEDs. It does not work well with my 2 incandescent bulbs. Just for the sake of discussion, my two light bulbs are about 200 watts total. That is well below the 600 watts for incandescent bulbs that this switch is rated for. Here is switch that does not work well with incandescents. Who knew?
October 14, 2014
Rated 5.0 out of 5.0 by Jonsey Easy to install
Works like i expected and was easy to install. I would recommend. Will not work with some type bulbs
January 20, 2015
Rated 4.0 out of 5.0 by Mack Dimmer Switch
Installation went well, but the instructions need to be simplified in order for an 'electrical' novice to get the wiring correct the first time through. If the wiring colors mentioned in the instructions do not match, then you have a second issue to deal with. I am basing these comments off the fact that I had a fairly good idea as to what I was doing.
Other than that, things went well and the unit works fine.
July 2, 2014