Model # TGFSQ-FH-WH

Internet #100399017

Store SKU #511238

Lutron Toggler 1.5 Amp Single-Pole or 3-Way 3-Speed Fan Control - White
0027557706520

Lutron

Toggler 1.5 Amp Single-Pole or 3-Way 3-Speed Fan Control - White

$21.97 /each
Color/Finish: White
  • Ivory
  • Light Almond
  • White

Frequently Bought Together

Product Overview

Toggler Fan Controls are designed to replace or match your traditional toggle style switches. Features easy to use toggle switch and small slide dimmer. Provides control of one ceiling paddle fan and 3 quiet fan speeds provide increased comfort. Shallow one-inch-deep back cover for easy installation. Fits into a traditional opening, and works with existing multi-gang wallplates. Coordinating Fassada wallplates purchased seperately.

  • 3-speed slider and toggle switch that turns fan on to preset level
  • Fits small, traditional wall plate openings and works with existing multi-gang wall plates
  • For use with 1 ceiling paddle fan
  • Easy installation and operation
  • For use with indoor ceiling paddle fans only
  • Click here for more information on Electronic Recycling Programs

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

Is the switch plate attached to the toggle switch or can it be removed?

Asked by: NWM
This is a switch only......plate is not included.....it works with any toggle plate..
Answered by: Mongo333
Date published: 2017-02-21

Can I run three fans on this switch the fans draw 31watts each at medium speed

Asked by: Winmkr
This product is only rated to control a single fan and is not recommended for use on multiple ceiling fans.
Answered by: Lutron
Date published: 2016-11-29

I need single wall control unit to control speed of 3 ceiling fans

Asked by: Leif
This product is not rated to handle more than a single fan. Lutron's solution would be to use the control MA-FQ4FM and a single canopy module, the CM-FQ1, at each of the fan locations.
Answered by: Lutron
Date published: 2016-09-21

Can I use a TGFSQ-FH-WH fan control toggler to operate a squirel cage blower motor located in a gas fireplace?

A standard SPST toggle switch operates the fireplace blower motor now (on-off) but, I would like to be able to reduce the speed as necessary to reduce noise. I would think a ceiling fan and a small blower motor in a fireplace would be a similar application.
Asked by: Handelbar
This product is only compatible with 3 speed fan motors so if your motor is not three speed, then this switch will not function correctly. If this is the case, you would want to look for a solid state or variable speed fan control.
Answered by: Lutron
Date published: 2016-08-04
  • y_2017, m_2, d_23, h_4CST
  • bvseo_bulk, prod_bvqa, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_5
  • loc_, sid_100399017, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 36ms
  • QUESTIONS, PRODUCT

Customer Reviews

Toggler 1.5 Amp Single-Pole or 3-Way 3-Speed Fan Control - White is rated 3.9 out of 5 by 20.
Rated 5 out of 5 by from Does the Trick! It wasn't until I started looking for a 3-position fan switch that I found out there are very few available on the market to choose from. Our home was built within the last 5 years and those rooms which had ceiling fans originally all had fan switches installed. When adding one however we needed to replace the non-used toggle switch with this in order to facilitate fan speed adjustments from the floor. Thankfully the design of the switch hadn't changed in 5 years and install was very easy with basic wiring skills, same as any switch replacement. Looks good and functions great. They're not cheap but they work.
Date published: 2016-08-24
Rated 5 out of 5 by from I used this switch to replace an existing on/off switch for a ceiling fan. The switch was easy to... I used this switch to replace an existing on/off switch for a ceiling fan. The switch was easy to install and works great. The fan happens to be on an Arc Fault breaker so occasionally moving the slider on the side will trip the breaker while on. The breaker is very sensitive and will also trip if we plug a vacuum cleaner into an outlet in the room (I suspect the breaker is bad). The three speeds have good variation with the lowest speed providing just enough air movement to keep the room fresh. All in all a very good product.
Date published: 2016-11-01
Rated 5 out of 5 by from Will Buy More I installed one of these ~2.5 years ago for a fan with a light kit. This controls the fan; the light is on a dimmer. I just did the same set-up over the weekend in another room and everything works great. It's a great option for a fan where you don't want to use a remote. Cheaper than other options and gives you the flexibility to run your fan how you want.
Date published: 2016-06-14
Rated 5 out of 5 by from Fan control wors very good. This control works better than the control that came with the fan. It slows the fan just a little slower than the control that came with the fan. It helps distribute the air a bit slower, we use it in connection with our air conditioner to spread the cool air more evenly around the living room.
Date published: 2016-08-09
Rated 1 out of 5 by from Junk The fan would only work on the highest setting, otherwise the lights would flicker. I bought a more expensive switch and it worked perfectly.
Date published: 2016-05-08
Rated 5 out of 5 by from Ceiling fan dimmer Needed a fan control for ceiling fan. Needed the dimmer to fit into a switch plate with 4 switches. Works and fits perfectly
Date published: 2016-08-23
Rated 5 out of 5 by from Saves time easy to install, simple to operate, saves time when you have a ceiling fan that is to high to reach pull cord without standing on bed or taken out a step ladder. Just move lever to speed and flip toggle switch to turn on fan.
Date published: 2015-11-14
Rated 3 out of 5 by from i like it but...causes LED in fan to brighten momentarily as speeds are changed I like this item. Just wish it worked exactly as expected. I installed it instead of a remote to go to a ceiling fan with LED light an no pull chains. I also have a Toggler dimming switch for the light from a previous install but since there are no chains on this fan I needed the fan control too (unless I wanted to use the remote and have an unused switch on the wall.) The only issue I've ran into is that as speeds are selected, when the light is dimmed, the light briefly flickers at full brightness. Seems like a slight power surge that the LED picks up that maybe a less efficient light would not.
Date published: 2015-06-01
  • y_2017, m_2, d_20, h_1
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_20
  • loc_, sid_100399017, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 54ms
  • REVIEWS, PRODUCT