0034584008800

MOEN

Model CSR2165BN

Internet #202044572

Store SO SKU #1000063499

60 in. Curved Shower Rod with Pivoting Flanges in Brushed Nickel

$29.29 /each
  • Provides up to an additional 7.5 in. of room to maximize space
  • Easy installation with included hardware
Color/Finish: Brushed Nickel
  • Brushed Nickel
  • Chrome
  • Old World Bronze

Frequently Bought Together

Product Overview

Are you ready for a more comfortable experience in your shower. MOEN Inspirations Curved Shower Rods provide up to an additional 7.5 in. (depending on the model) of elbow room, allowing you to truly maximize your space. Curved Shower Rods add an elegant and luxurious look to any bathroom. The included decorative covers offer an additional stylish element while helping to conceal the mounting hardware.

  • Added area allows greater freedom of movement with less likelihood of contact with the curtain
  • Brushed nickel finish
  • Easy to install - hardware included
  • Limited lifetime warranty

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

More Products With These Features

Search

Customer Questions & Answers

20 Questions31 Answers

Customer Questions & Answers

60 in. Curved Shower Rod with Pivoting Flanges in Brushed Nickel
60 in. Curved Shower Rod with Pivoting Flanges in Brushed Nickel

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
This question is from 60 in. Curved Shower Rod with Pivoting Flanges in Brushed Nickel
 
5 answers

Is this model a cut to fit one piece rod?

This question is from 60 in. Curved Shower Rod with Pivoting Flanges in Brushed Nickel
Asked by
Bill E.
April 19, 2012
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (5)

Asked by
Savannah, TN 38372, USA
Read all my Q&A
April 10, 2013
Answer: 
Yes, very easy, but you need a saw with a blade that will cut stainless steel
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0

Asked by
Bethlehem, PA, USA
Read all my Q&A
February 26, 2013
Answer: 
The specs indicate length of 59" but my bath is 60" and it fit just fine. There was no need to cut it to size. The ends would extend slightly more, but not much. It is designed for a 5' shower. The rod is one piece though, not extendable. and cannot be compressed
+4points
4out of 4found this answer helpful.
Was this helpful?helpful4unhelpful0

Asked by
Read all my Q&A
July 31, 2012
Answer: 
Yes, it is a one-piece cut to fit. We love ours.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Nebraska
Read all my Q&A
May 10, 2012
Answer: 
It didn't say anything in the installations instructions about being able to cut it. However, I don't see any problem with doing it. The round parts at the end fit inside the main length of tube so you can cut this down without affecting anything. Also, the curved part covers the end of the main rube, so it won't show at all. Just make sure to measure it correctly by subtracting the added length at each Read More
It didn't say anything in the installations instructions about being able to cut it. However, I don't see any problem with doing it. The round parts at the end fit inside the main length of tube so you can cut this down without affecting anything. Also, the curved part covers the end of the main rube, so it won't show at all. Just make sure to measure it correctly by subtracting the added length at each end. Read Less
0points
2out of 4found this answer helpful.
Was this helpful?helpful2unhelpful2

Asked by
Read all my Q&A
April 20, 2012
Answer: 
Hello Bill. Thank you very much for your interest in Moen products. Moen’s DN2160CH one-piece curved shower rod is designed to be cut to fit shower enclosures between 54 – 72 inches. If you have additional questions, please feel free to complete the form at http://www.moen.com/consumer-support/contact-us or call Moen at 1-800-289-6636. Our business hours are 8:00 a.m. - 8:00 p.m. Monday through Friday Read More
Hello Bill. Thank you very much for your interest in Moen products. Moen’s DN2160CH one-piece curved shower rod is designed to be cut to fit shower enclosures between 54 – 72 inches. If you have additional questions, please feel free to complete the form at http://www.moen.com/consumer-support/contact-us or call Moen at 1-800-289-6636. Our business hours are 8:00 a.m. - 8:00 p.m. Monday through Friday and 9:00 a.m. - 5:30 p.m. Saturday EST. Read Less
-4points
2out of 8found this answer helpful.
Was this helpful?helpful2unhelpful6
This question is from 60 in. Curved Shower Rod with Pivoting Flanges in Brushed Nickel
 
4 answers

What does "pivoting Flanges" mean ?

This question is from 60 in. Curved Shower Rod with Pivoting Flanges in Brushed Nickel
Asked by
Chris
Michigan
July 8, 2012
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (4)

Asked by
Savannah, TN 38372, USA
Read all my Q&A
April 10, 2013
Answer: 
pivoting, means it will move so it wil lay flat to the wall for installing rod, very easy
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0

Asked by
Bethlehem, PA, USA
Read all my Q&A
February 26, 2013
Answer: 
The mounting flanges on the ends 'pivot' to mount flush on your wall to account for any imperfections in your bathroom wall alignment. Then the covers just snap into place to hide them.
+9points
9out of 9found this answer helpful.
Was this helpful?helpful9unhelpful0

Asked by
Read all my Q&A
July 31, 2012
Answer: 
It means that the rod pivots within the outer rings, making installation very easy.
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0

Asked by
Read all my Q&A
July 10, 2012
Answer: 
Hello Chris. Thank you so much for your interest in Moen products. Pivoting flanges on our Moen curved shower rod CSR2165BN means the hardware on the end of the rod has pivots. The hardware can move up or down so it is easier for you to install on your wall. If you have additional questions, please complete the form at http://www.moen.com/consumer-suppoert/contact-us or call Moen at 1-800-289-6636. Our Read More
Hello Chris. Thank you so much for your interest in Moen products. Pivoting flanges on our Moen curved shower rod CSR2165BN means the hardware on the end of the rod has pivots. The hardware can move up or down so it is easier for you to install on your wall. If you have additional questions, please complete the form at http://www.moen.com/consumer-suppoert/contact-us or call Moen at 1-800-289-6636. Our business hours are 8:00 a.m. - 8:00 a.m. Monday through Friday and 9:00 a.m. - 5:30 p.m. Saturday EST. Read Less
0points
2out of 4found this answer helpful.
Was this helpful?helpful2unhelpful2
This question is from 60 in. Curved Shower Rod with Pivoting Flanges in Brushed Nickel
 
4 answers

Shower rod. I need a nice rod but cannot exceed 42"

This question is from 60 in. Curved Shower Rod with Pivoting Flanges in Brushed Nickel
Asked by
Don
Florida
October 5, 2011
I prefer a fixed rod rather than tension. Can the longer curved rods be shortened by cutting?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (4)

Asked by
Savannah, TN 38372, USA
Read all my Q&A
April 10, 2013
Answer: 
Yes you can cut it down to the length you need, just make sure to have a saw with a blade that will cut stainless steel.
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0

Asked by
Read all my Q&A
July 31, 2012
Answer: 
Yes, it is very easy to cut it to the proper length. We had to cut our off, too. Be sure to measure from the middle so that the curved proportions remain equal.
+4points
4out of 4found this answer helpful.
Was this helpful?helpful4unhelpful0

Asked by
Nebraska
Read all my Q&A
May 10, 2012
Answer: 
It didn't say anything in the installations instructions about being able to cut it. However, I don't see any problem with doing it. The round parts at the end fit inside the main length of tube so you can cut this down without affecting anything. Also, the curved part covers the end of the main rube, so it won't show at all. Just make sure to measure it correctly by subtracting the added length at each Read More
It didn't say anything in the installations instructions about being able to cut it. However, I don't see any problem with doing it. The round parts at the end fit inside the main length of tube so you can cut this down without affecting anything. Also, the curved part covers the end of the main rube, so it won't show at all. Just make sure to measure it correctly by subtracting the added length at each end. Read Less
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Read all my Q&A
October 6, 2011
Answer: 
Hello Don. Thank you so much for your interest in Moen products. The Moen Brand includes many shower rod options. To verify the best product for you, we would suggest contacting us at 1-800-289-6636. Our business hours are 8:00 a.m. - 8:00 p.m. Monday through Friday and 9:00 a.m. - 5:30 p.m. Saturday EST. We are here to provide technical support and ensure you will be satisfied with your Moen product.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
This question is from 60 in. Curved Shower Rod with Pivoting Flanges in Brushed Nickel
 
2 answers

Will I have to cut this down?

This question is from 60 in. Curved Shower Rod with Pivoting Flanges in Brushed Nickel
Asked by
Canton, MS
Read all my Q&A
September 1, 2015
When I measure where my current curtain rod is hung; it measures 59 inches. My current shower rod is not curved. Will I have to cut this one down or does the curve make it able to fit in a 59 inch shower? My house is an older house. Built in the 1970's.
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
Read all my Q&A
September 4, 2015
Answer: 
Hello GlitterBarbie and thank you for your interest in Moen products. The Moen 60 in. Curved Shower Rod with Pivoting Flanges in Brushed Nickel can be installed into your 59” opening. You will need to cut equal amounts off each end of the shower rod to fit it into your enclosure and still receive the benefit of the extra elbow room. If you have additional questions, please feel free to call us at Read More
Hello GlitterBarbie and thank you for your interest in Moen products. The Moen 60 in. Curved Shower Rod with Pivoting Flanges in Brushed Nickel can be installed into your 59” opening. You will need to cut equal amounts off each end of the shower rod to fit it into your enclosure and still receive the benefit of the extra elbow room. If you have additional questions, please feel free to call us at 800-289-6636. Our business hours are 8:00 am - 7:00 pm Monday through Friday and on Saturdays from 9:00 am - 3:00 pm(EST). Read Less
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

September 2, 2015
Answer: 
This item will fit a 59 inch shower.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
2 »
  • 2016-09-08 T13:13:06.620-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_202044572, prod, sort_default
2 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 71ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 4.8 out of 5 by 36 reviewers.
Rated 5.0 out of 5.0 by Looks fantastic! I love this curved shower rod. It adds a lot of elbow room in the shower and gives the bathroom a luxurious look. I love that there is no divider in the middle to slide the shower rings over just smooth rod. I had to cut it to get it to fit exactly but it was easy enough and then it was a breeze to install with a few screws. July 19, 2016
Rated 5.0 out of 5.0 by Great product As advertise worked great. Had to cut down slightly. August 30, 2016
Rated 5.0 out of 5.0 by solid product this product matched our other fixtures perfect. the shower rod has been in use for a month now and it is more solid than i anticipated. it mounted as advertised, works well and looks great. August 16, 2016
Rated 5.0 out of 5.0 by best product ever could not find what I want in stock anywhere so order this off HD.com and very happy with product. I can't stand adjustable shower rods as the curtain always get hung up where the rod connects in the middle. sorry but "drives me nuts" so I always buy a rod that is one piece no middle connect. Love it August 2, 2016
Rated 5.0 out of 5.0 by Excellent Product, Easy to installed, Super Fast shipping to boot! Looks Great! Super Simple to install, excellent quality and instructions! August 2, 2016
Rated 5.0 out of 5.0 by Curved Rod My wife loves to look at it and take a shower with it. July 9, 2016
Rated 5.0 out of 5.0 by Looks great, sturdy! Great shower curtain rod! Best I've found. Easy installation. One piece, looks great! I bought a another for my second bathroom. Makes shower feel much larger without taking up any noticible space in bathroom. May 31, 2016
Rated 5.0 out of 5.0 by Moen 60" Curved Shower Rod This shower rod gave us a little additional space in the shower. Looks great and functions well. June 9, 2015
  • 2016-09-08 T14:38:05.884-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_36, tr_36
  • loc_en_US, sid_202044572, prod, sort_default
2 >>
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 38ms
  • REVIEWS, PRODUCT