Model # SMA1000CH

Internet #202044138

Store SO SKU #1000670737

MOEN SecureMount Stainless Steel Grab Bar Anchors in Chrome (2-Pack)
0034584007728

MOEN

SecureMount Stainless Steel Grab Bar Anchors in Chrome (2-Pack)

  • Anchors works with most grab bars
  • Mounts securely up to 1-1/2 in. thick
  • 2-Pack
$41.97 /each

Frequently Bought Together

Product Overview

Install a grab bar securely anywhere on the wall with SecureMount Anchors. Precision engineered for optimal bracing behind the wall, SecureMount anchors allow for easy grab bar installation with no studs required. Installation is as easy as 1-2-3. Just drill the hole, install anchor and mount the grab bar. For use only when installing in a hollow wall and no stud is present.

  • Chrome finish is highly reflective for a mirror-like look that works with any decorating style
  • Comes with 2 anchors
  • Independently tested by CSA and NAHB laboratories to exceed ADA, ASTM, ANSI and CSA standards
  • Mounts securely to a variety of substrates, including multiple layers up to 1-1/2 in. thick
  • Limited lifetime warranty

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

12 Questions17 Answers

Customer Questions & Answers

SecureMount Stainless Steel Grab Bar Anchors in Chrome (2-Pack)
SecureMount Stainless Steel Grab Bar Anchors in Chrome (2-Pack)

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
 
4 answers

Locating studs

This question is from SecureMount Stainless Steel Grab Bar Anchors in Chrome (2-Pack)
Asked by
San Francisco, CA
Read all my Q&A
December 6, 2013
I want to install grab bars in my shower. I stumbled on this product while trying to figure out how to locate the studs behind a wall that's tiled to the ceiling. The consensus seems to be that it may be very difficult to locate them. But with these, I still have the problem, don't I, since I have to find the studs in order to avoid them? Any suggestions?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (4)

Asked by
Long Island, New York, USA
Read all my Q&A
January 26, 2014
Answer: 
I made the same mistake with a bathroom. I should have mapped out the studs. Stud-finders don't work no matter how much you pay for them. My only suggestion is this; As I remodeled my bathroom I kind of knew where the studs were on that wall. I knew there were jack-studs on either side of the window. So I picked a point-of-reference, hoping my memory served me well, and started drilling with a carbide Read More
I made the same mistake with a bathroom. I should have mapped out the studs. Stud-finders don't work no matter how much you pay for them. My only suggestion is this; As I remodeled my bathroom I kind of knew where the studs were on that wall. I knew there were jack-studs on either side of the window. So I picked a point-of-reference, hoping my memory served me well, and started drilling with a carbide bit hole-saw and prayed now that I didn't hit a stud. Luck and memory and I installed these anchors and they work incredibly well. No problems. Read Less
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
North Dakota
Read all my Q&A
January 14, 2014
Answer: 
You can place these at any location you want. If you hit on a stud thats OK. These anchors work on a hollow wall and if you hit on a stud you wiil not use it, but connect the grab bar directly to the stud in the wall and the other end to the wall anchor.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Read all my Q&A
December 6, 2013
Answer: 
Hello Denise and thank you for your interest in Moen products. The MOEN Home Care SecureMount Stainless-Steel Grab Bar Anchors in Chrome (2-Pack) were designed to allow a secure installation without stud mounting. You will need to confirm the places you wish to use the MOEN Home Care SecureMount Stainless-Steel Grab Bar Anchors will have 3-1/2" of space behind the wall and does not hit a stud. Moen grab Read More
Hello Denise and thank you for your interest in Moen products. The MOEN Home Care SecureMount Stainless-Steel Grab Bar Anchors in Chrome (2-Pack) were designed to allow a secure installation without stud mounting. You will need to confirm the places you wish to use the MOEN Home Care SecureMount Stainless-Steel Grab Bar Anchors will have 3-1/2" of space behind the wall and does not hit a stud. Moen grab bars do offer you the option to install one end using the MOEN Home Care SecureMount Stainless-Steel Grab Bar Anchors and stud mounting the other end.
We suggest seeking the services or guidance of an installation professional for advice on the best way to locate the studs behind your tiled shower wall.
If you have additional questions, please complete the form at http://www.moen.com/consumer-support/contact-us or call Moen at 1-800-289-6636. Our business hours are 8:00 am – 7:00 pm Monday through Friday and 9:00 am – 3:00 pm on Saturday EST. We are here to provide support and ensure you will be satisfied with your Moen product.
Read Less
User submitted photo
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

December 6, 2013
Answer: 
Thank you for your recent inquiry with The Home Depot. I believe the best advice would be to talk to one of our many specialty department professionals at your local Home Depot store. The best solution would be to purchase a stud finder to locate the studs in your wall. For any other questions, please visit your nearest local Home Depot store .
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
2 answers

Will this work on fiberglass shower stall

This question is from SecureMount Stainless Steel Grab Bar Anchors in Chrome (2-Pack)
Asked by
Baltimore MD
Read all my Q&A
January 29, 2016
Fiberglass shower stall with 2-3 inch gap between stall and wall board. Need to install grab bar with one end not near a stud. Will this do the job?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
Kingman, Az.
Read all my Q&A
August 9, 2016
Answer: 
Yes. used them in my Fiberglass stall.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

February 3, 2016
Answer: 
Yes, this will work on a fiberglass shower stall.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
 
2 answers

what size hole for Securemount

This question is from SecureMount Stainless Steel Grab Bar Anchors in Chrome (2-Pack)
Asked by
south montrose pa
Read all my Q&A
July 30, 2015
What size hole is required?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
Kingman, Az.
Read all my Q&A
August 9, 2016
Answer: 
1-1/8" hole bit
-1point
0out of 1found this answer helpful.
Was this helpful?helpful0unhelpful1

Asked by
Read all my Q&A
August 13, 2015
Answer: 
Hello BL09. Thank you so much for your interest in Moen products. The Moen Securemount anchors need a 1-1/4" hole. If you have additional questions, please call Moen at 1-800-289-6636 our business hours are 8:00 a.m. - 7:00 p.m. Monday through Friday and 9:00 a.m. - 3:00 p.m. Saturday EST.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
2 answers

Why is there such a price difference between this model and the MOEN Model # SMA1005CH Internet # 203993300 Securemount Anchors in Chrome?

This question is from SecureMount Stainless Steel Grab Bar Anchors in Chrome (2-Pack)
Asked by
Utah
Read all my Q&A
March 12, 2015
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
Read all my Q&A
March 17, 2015
Answer: 
Hello Care. Thank you so much for your interest in Moen products. The Moen SecureMount Anchor kit SMA1000CH is a two pack kit. The SMA1005CH is a single pack kit. Moen is not aware of how Home Depot does their pricing. If you have additional questions, please call Moen at 1-800-289-6636 our business hours are 8:00 a.m. - 7:00 p.m. Monday through Friday and 9:00 a.m. - 3:00 p.m. Saturday EST.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

March 16, 2015
Answer: 
Thank you for your recent inquiry with The Home Depot. Unfortunately, I need more information from you in order to properly address your question. For any other questions, please call us at HomeDepot.com Customer Service 800-430-3376. Thank you for shopping Home Depot.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
2 »
  • 2016-10-30 T23:08:44.015-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_202044138, prod, sort_default
2 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 40ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 4.7 out of 5 by 11 reviewers.
Rated 4.0 out of 5.0 by A Good Product, Just A Little Pricey. These are the answer to installation where studs are not available in the right locations. My walls were 1/2" plywood, so they were plenty strong enough, but I don't think they'd hold 500 lbs in drywall. Well engineered, they work great. I think the engineering is what gives them the high price, so maybe the price will come down soon. If you can mount to studs, great, but if not, this is your only option. October 4, 2016
Rated 5.0 out of 5.0 by Installation simplicity Excellent for mounting grab bars. Should be listed with the grab bars and add another listings for the 1 1/4" core drill and mandrel. September 6, 2016
Rated 5.0 out of 5.0 by Work great! Allowed me to install Handicap bars in the shower where I wanted them! Not limited by stud locations. August 9, 2016
Rated 5.0 out of 5.0 by Works great I used these fasteners before they work great they are a little pricey but there's no other products that compares December 29, 2015
Rated 5.0 out of 5.0 by Worked Great This made the job quick and safe. I did tie a string to backers, but had no problems. Highly recommend when you have no stud or want to avoid studs. They were way over M.S.R.P. $29.40 so I called and they lowed the price. August 12, 2015
Rated 5.0 out of 5.0 by Really neat and easy anchor for Moen Handrail Really an easy way to mount this on existing fiberglass one piece tub enclosure. With video from Moen, it makes the handrail very secure and sturdy. June 2, 2015
Rated 4.0 out of 5.0 by Nice product for existing fiberglass walls stated that needs 3 1/2" wall space. Didn't have that. Decided to try anyway. Lost 2 backers in wall on 1st bar install. 2nd bar install went smoother. Used long installation screw instead of plastic install tool. Was easier. Installed with MOEN grab bars. Screw covers didn't want to fit easily around mounting. Will be interested to see how they hold up. Will definitely use again. July 7, 2015
Rated 4.0 out of 5.0 by This product has great features Great product a little tough to install in shower tiles need the right tool to go thru tile May 27, 2014
  • 2016-10-30 T21:21:15.873-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_11, tr_11
  • loc_en_US, sid_202044138, prod, sort_default
2 >>
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 107ms
  • REVIEWS, PRODUCT