Model # LPNLSCALGLD624C

Internet #202518676

Store SO SKU #1000528209

MS International California Gold Ledger Corner 6 in. x 24 in. Natural Slate Wall Tile (4 sq. ft. / case)
0747583005939

MS International

California Gold Ledger Corner 6 in. x 24 in. Natural Slate Wall Tile (4 sq. ft. / case)

  • Frost resistant for outdoor use
  • Random variation in tone creates a distinct, one-of-a-kind look
  • Natural stones vary and offer a unique texture for your space
$8.49 /sq. ft.
Covers 4.00 sq. ft.
$33.96 /case

Frequently Bought Together

Product Overview

The MS International California Gold Ledger Corner Natural Slate Wall Tile is a slate ledger designed for use around corners. This complements a wall install of similar ledger panels and helps finish the corners. The panel features a symbiosis of bold, earthy tones and is suitable for wall installations both indoors and out. Note: Please inspect all tiles before installation. Natural stone products inherently lack uniformity and are subject to variation in color, shade, finish, etc. It is recommended to blend tiles from different boxes when installing. Natural stones may be characterized by dry seams and pits that are often filled. The filling can work its way out and it may be necessary to refill these voids as part of a normal maintenance procedure. All natural stone products should be sealed with a penetrating sealer. After installation, vendor disclaims any liabilities.

  • 4 square feet; 4 pieces per case. Case weight is 50 lb.
  • Grade 1, first-quality slate tile for wall use
  • 6 in. width x 24 in. length x 1-1/2 in. thick
  • Natural finish with a low sheen and random variation in tone
  • P.E.I. Rating is not applicable for natural stone
  • Vitreous tile has water absorption of more than 0.5% but less than 3% for indoor use and some outdoor applications
  • C.O.F. rating is not applicable for wall tile
  • Completely frost resistant for indoor or outdoor applications
  • Residential and commercial use
  • Genuine stone creates a stunning, natural look
  • Don't forget your coordinating trim pieces grout backerboard thinset and installation tools
  • All online orders for this item ship via common carrier or parcel ground and may arrive in multiple boxes
  • It is recommended you purchase a minimum of 10% overage to account for design cuts and patterns
  • This is a GREENGUARD Indoor Air Quality Certified and GREENGUARD Children and Schools Certified product
  • Check out our helpful guide on how to select tile.

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

38 Questions67 Answers

Customer Questions & Answers

California Gold Ledger Corner 6 in. x 24 in. Natural Slate Wall Tile (4 sq. ft. / case)
California Gold Ledger Corner 6 in. x 24 in. Natural Slate Wall Tile (4 sq. ft. / case)

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
 
9 answers

how many pieces in a box

This question is from California Gold Ledger Corner 6 in. x 24 in. Natural Slate Wall Tile (4 sq. ft. / case)
Asked by
Goleta ca
Read all my Q&A
October 28, 2013
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (9)

August 2, 2016
Answer: 
4
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Colorado
Read all my Q&A
Home Improvement Profile: DIYer
April 7, 2016
Answer: 
4
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Ardmore, Oklahoma
Read all my Q&A
January 13, 2015
Answer: 
4 pieces in a box.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Albany NY
Read all my Q&A
October 21, 2014
Answer: 
There are 4 in a box.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Los Angeles
Read all my Q&A
September 23, 2014
Answer: 
Usually four pieces in a box
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Moshiem TN
Read all my Q&A
September 21, 2014
Answer: 
Four tile in a box, they could be in many pieces.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

November 30, 2013
Answer: 
4 pieces were in the last box we ordered online
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Read all my Q&A
October 29, 2013
Answer: 
Four corner pieces are in each box
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
Read all my Q&A
October 28, 2013
Answer: 
Thank you for your question. The California Gold Ledger Corner 6 in. x 24 in. x 6 in. Natural Slate Wall Tile comes in a case of 4 pieces.
+3points
3out of 3found this answer helpful.
Was this helpful?helpful3unhelpful0
 
7 answers

Does this piece come in the reverse angle to place in a corner where two walls meet?

This question is from California Gold Ledger Corner 6 in. x 24 in. Natural Slate Wall Tile (4 sq. ft. / case)
Asked by
Missy
Bethesda, MD
February 26, 2013
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (7)

Asked by
Colorado
Read all my Q&A
August 12, 2014
Answer: 
No, you will need to buy the flat panels and cut or piece them into a corner
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
Read all my Q&A
October 3, 2013
Answer: 
No, just use the flats.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Houma, LA, USA
Read all my Q&A
September 4, 2013
Answer: 
Yes it does
-2points
0out of 2found this answer helpful.
Was this helpful?helpful0unhelpful2

Asked by
Idaho
Read all my Q&A
August 13, 2013
Answer: 
Not that I could find.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Orlando, FL, USA
Read all my Q&A
August 11, 2013
Answer: 
No...I would run one full tile into the corner and butt the tile from the other wall up against it. I would then do the opposite on the next row up, continuing this routine all the way up the inside corner.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
San Diego, CA, USA
Read all my Q&A
March 19, 2013
Answer: 
They panels do not come in that configuration. Use the straight panel pieces and cut the ends flat and the tiles on the two walls will create a natural looking finished corner.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Read all my Q&A
February 27, 2013
Answer: 
Thank you for your question. The California Gold Ledger Corner 6 in. x 18 in. x 6 in. Natural Slate Wall Tile does not come in any other corners.
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0
 
7 answers

Please provide installation instructions for MS International California Gold Ledger Corner 6 in. x 18 in. x 6 in. Natural Slate Wall Tile

This question is from California Gold Ledger Corner 6 in. x 24 in. Natural Slate Wall Tile (4 sq. ft. / case)
Asked by
Fasih
West New York, NJ
January 16, 2013
I am planning to install these on a dry wall to get a faux brick wall look. Please provide details with respect what kind of adhesive is required to install it. Also, can it be applied directly to the drywall?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (7)

Asked by
Read all my Q&A
May 7, 2016
Answer: 
Here is the company's own YouTube video on installation. It is a lot better than their answer to this question.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
flemington, mo.
Read all my Q&A
Home Improvement Profile: DIYer
January 31, 2015
Answer: 
im not an expert but i would not apply this directly to the dry wall. not sure the correct name of the material but you can get a few sheets of chicken wire material depending on square footage and tack it to the wall with roofing nails to give the tile and thinset something to adhere to. i dont think it is necessary to use the high dollar bag of thinset with the concentrate in it but for safety i did Read More
im not an expert but i would not apply this directly to the dry wall. not sure the correct name of the material but you can get a few sheets of chicken wire material depending on square footage and tack it to the wall with roofing nails to give the tile and thinset something to adhere to. i dont think it is necessary to use the high dollar bag of thinset with the concentrate in it but for safety i did use it when installing mine. i installed my tile over plywood with the chicken wire tacked to the plywood and did not have any problems. all you need is the bags of thinset, mixing bucket, diamond cutting blade( i just used 4 inch grinder), chicken wire, roofing nails to apply chicken wire, and a morter tool to appy thinset. start from the bottom and i would only go max 4 foot at a time and let dry. Read Less
User submitted photo
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Read all my Q&A
October 16, 2013
Answer: 
Recommend you glue and screw Durok or Wonderboard concrete panels to the wall first (with screws into studs) -- drywall alone will not support it. Although the panels are only and inch or so thick, they are stone and the weight will add up. Use thinset mortar "buttered" on the back of each panel to install, and be aware that the panel will slide down or sag before the thinset sets up, so build from the Read More
Recommend you glue and screw Durok or Wonderboard concrete panels to the wall first (with screws into studs) -- drywall alone will not support it. Although the panels are only and inch or so thick, they are stone and the weight will add up. Use thinset mortar "buttered" on the back of each panel to install, and be aware that the panel will slide down or sag before the thinset sets up, so build from the bottom up. I used a 2x4 to support the run of panels above the fireplace opening and removed it after the thinset cured for 24 hrs. Read Less
+5points
5out of 5found this answer helpful.
Was this helpful?helpful5unhelpful0

Asked by
Houma, LA, USA
Read all my Q&A
September 4, 2013
Answer: 
When you purchase it, ask the sales person, thats what i did and it worked great! I had to put a backing board on my wall, then i applied the slate.
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0

Asked by
Idaho
Read all my Q&A
August 13, 2013
Answer: 
We installed this product on an outdoor fireplace. We used VERSABOND thin-set mortar. I recommend using a grout bag to fill in gaps ... like a large pastry bag with a nozzle end. Because these pieces are so irregular on the inside, you need to butter them heavily in areas where they gap and I found using the grout bag very helpful for filling in edges with big gaps. Its less messy too ... its important Read More
We installed this product on an outdoor fireplace. We used VERSABOND thin-set mortar. I recommend using a grout bag to fill in gaps ... like a large pastry bag with a nozzle end. Because these pieces are so irregular on the inside, you need to butter them heavily in areas where they gap and I found using the grout bag very helpful for filling in edges with big gaps. Its less messy too ... its important to try and keep the front as clean as possible of mortar because unsealed slate is hard to clean (I would think even harder for an interior project than an exterior project). In fact, I sealed the tile pieces up to within 1/2 inch of ALL edges before I grouted and this helped with clean up. Read Less
+5points
5out of 5found this answer helpful.
Was this helpful?helpful5unhelpful0

Asked by
Texas
Read all my Q&A
February 14, 2013
Answer: 
I have not installed this on drywall before and would prefer hardiboard or some other substrate without a paper layer that could peel. Although these panels are stacked on each other, they are heavy and I would be concerned that in time they could peel away. If your drywall is rather new, then you might be ok to give it a try. Old drywall paper and any paint layers can get brittle in time. I used liquid Read More
I have not installed this on drywall before and would prefer hardiboard or some other substrate without a paper layer that could peel. Although these panels are stacked on each other, they are heavy and I would be concerned that in time they could peel away. If your drywall is rather new, then you might be ok to give it a try. Old drywall paper and any paint layers can get brittle in time. I used liquid nail to apply these panels to wood veneer. Read Less
+3points
3out of 3found this answer helpful.
Was this helpful?helpful3unhelpful0

Asked by
Read all my Q&A
January 17, 2013
Answer: 
Thank you for your question. It is recommended that a professional installer/designer be consulted for determining the suitability, maintainability and installation of the item for a particular installation.
-6points
1out of 8found this answer helpful.
Was this helpful?helpful1unhelpful7
 
3 answers

I would like to use this for a fireplace surround. Do you know what the R-factor is (i.e. is it non-combustible)?

This question is from California Gold Ledger Corner 6 in. x 24 in. Natural Slate Wall Tile (4 sq. ft. / case)
Asked by
Lunenburg, VT
Read all my Q&A
July 10, 2014
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (3)

Asked by
Reno, Nevada
Read all my Q&A
Home Improvement Profile: DIYer
June 4, 2015
Answer: 
We had it installed on our fireplace and around the fireplace.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Colorado
Read all my Q&A
August 12, 2014
Answer: 
It is stone so no problem with that. However, order more than you need as it many will arrive damaged!
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0

Asked by
Read all my Q&A
July 11, 2014
Answer: 
Thank You for your question. In general the California Gold Ledger Corner 6 in. x 18 in. x 6 in. Natural Slate Wall Tile can be used around the fire place.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
2 3 »
  • 2016-10-30 T22:27:44.737-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_202518676, prod, sort_default
2 3 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 67ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 3.8 out of 5 by 65 reviewers.
Rated 5.0 out of 5.0 by Looks great Looks great on my outdoor kitchen. Very happy with the stone, you do need a good tile saw to cut. Some of the corner piece would broke but was still able to sue them. September 20, 2016
Rated 4.0 out of 5.0 by Very good and easy to work with The only negative is they break easy need to handle with care August 3, 2016
Rated 4.0 out of 5.0 by Love the final look, product and packaging was TERRIBLE The stone itself looks awesome now that it is up. However, we had a contractor install it and we had to reorder twice to get good corner pieces. And that set the contractor back and the job took weeks instead of a day or two. The corner pieces we ordered were all broken, seemingly as though a customer brought back odd pieces in a box to get credit and the boxes were just sent back out without being checked. We also did not take into account the footage based on the corners being longer that higher - it should be stated on package! So we had to reorder twice and the contractor was quite frustrated. However, the final job looks fantastic! April 14, 2016
Rated 2.0 out of 5.0 by Take care and plan ahead when opening. These will come broken(1/2-1/3) of mine. Plan ahead if you are going to use them. They went into the box unbroken so the pieces are approximated in their location. Before removing I would suggest you get your hot glue gun ready. As you remove each piece, immediately repair it. This will avoid you having to put together a jigsaw puzzle later. Keep pieces from each box separate until all reassembled. It's a shame they are glued together so poorly. Mine came very dark with little if any golden color. Mostly grey. Have not installed them yet. I had them delivered to store so I could open there and decide if I wanted to proceed. September 12, 2016
Rated 5.0 out of 5.0 by Beautiful slate wall tile This wall tile is easy to work with and absolutely BEAUTIFUL!! It is NOT as gold, as it appears to be in the photos. It is really a true slate, The primary colors are a slate gray with a warm golden brown. We were not sure how our finished product would look, but we closed our eyes and hoped for the best...and it is much, much better than I could have imagined! There is a problem, though. DO NOT have this shipped to you. You will receive a box of rubble. Some how, if it's shipped to the store it's fine, but not to your home. October 4, 2016
Rated 3.0 out of 5.0 by Good for the price Good ledger stone for the price. 25% of the pieces were broken ... many can still be used since they broke at the glue lines ... it just take a bit more time, but others broke in the middle of the stone. Handle gently. We used broken pieces where we would have had to cut full pieces. Once installed it looks good. October 18, 2016
Rated 5.0 out of 5.0 by Easy product to work with Easy to work with, nice finish. Applied the stone to backer board using thinset mortar. Rock solid. Just make sure you clean up any thinset that squeezes out before it dries. The only thing I wish they sold was capping. Most of what you find is too thick or too wide. I bought bricks and sliced them to create my capping. February 23, 2016
Rated 3.0 out of 5.0 by Not the quality I expected I would recommend this product with reservations. We purchased these corners for the front side edges of our house that we were rocking. We had them delivered to the house. Two boxes of the 9 delivered were all broken up, unsalvageable. The biggest problem, however, was trying to get them lined up. We were using these corner pieces to go from the garage door to just around the corner and from the entrance door to just around the corner. We started with the garage first. We had to cut each end of each piece. The longer side to butt up against the garage door. The shorter end to go just around the corner for about 2" (Not all of the sides were the same length when we cut off the "L" on the shorter side). I would measure the top of the corner and cut only to find that it was short once I held it up to the garage door. Several times there would be a lump of dried glue or a piece of the rock that hadn't been cut the same thickness as the others. Even being aware of this, often times it would throw the cut off up to 1/4th inch. More often I would find that the angle of the corner was more than 90 degrees. It would need a lot of mortar to fill in the back. Sometimes as we'd cut, a large chunk of rock would break apart. We were using a decent wet tile saw to cut these pieces. This rock is, for the most part, just fragile. I could fairly easily piece the straight ledger rock to go across the front of the house, but the corners were different. It was much more difficult to keep the cracks/breaks from showing. Another issue we had with the corners was that if the front wall was level the side might not be. The corner seemed warped sometimes. It would take us 3 times more mud to feel like we had a good seal between the wall and the stone. We are now not doing the 2nd side edge with the corner stones. A) We won't have enough pieces with all of the breakage we had, and B) I can get a tighter fit to the entry door if I don't have to involve the corner. Oh, and C) it's a lot more cost effective to not put the corners on. I'm not sure we'll get any credit back if the rock cracked and fell apart as we were cutting. I will say what we've done looks beautiful. We've had so many compliments on it. It's a lot of hard work and takes much longer than we expected. The rock does tend to just break apart when you cut the stones, or even pick them up out of the boxes. If you're good at putting puzzle pieces together, you can make most of the pieces work. April 7, 2016
  • 2016-10-30 T20:32:20.323-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_65, tr_65
  • loc_en_US, sid_202518676, prod, sort_default
2 3 >>
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 35ms
  • REVIEWS, PRODUCT