Makita 1-1/8 in. SDS-Plus Rotary Hammer with 4-1/2 in. Angle Grinder-HR2811FX - The Home Depot


Model # HR2811FX

Internet # 202642348

Store SKU # 884190

1-1/8 in. SDS-Plus Rotary Hammer with 4-1/2 in. Angle Grinder

Makita 1-1/8 in. SDS-Plus Rotary Hammer with 4-1/2 in. Angle Grinder

This item has been discontinued.
The Home Depot no longer carries this specific product.

$299.00 / each


Model # HR2811FX

Internet # 202642348

Store SKU # 884190

Store SO SKU # 1000668646

The HR2811F 1/1/8 in. Rotary Hammer comes equipped with a 3-mode operation: rotation only, hammering with rotation and hammering only. It has a powerful, compact, ergonomic design with padded grip and side handle for increased operator comfort. This rotary hammer also has a LED light that illuminates on the drilling surface. Also included in the package is the Makita 4-1/2 in. Angle Grinder. The Makita 4-1/2 in. Grinder has a 7.5 -amp motor for high power output and 10,000 RPM.

California residents: seeProposition 65 information

  • Torque limiting clutch - prevents gear damage by automatically disengaging gears if the bit binds
  • Sequential impact timing - hammer timing during rotation to minimize overlapping bit impacts resulting in up to 50% more drilling efficiency
  • Makita motor advantage - field core interlocking steel laminations, dual ball bearing armature, and large surface commutator, resulting in the most efficient transfer of energy for greater power
  • Recessed lock-on button for continuous operation
  • 0-1,100 RPM and 0-4,500 BPM for demanding applications
  • Extended life brushes - Longer brushes for more work between service intervals and less downtime
  • Accepts SDS-Plus bits
  • Includes 4-1/2 in. angle grinder with a 7.5 -amp motor for high output and a 2-1/2 in. barrell grip for added comfort
  • All-ball bearing design and metal gear housing for durability
  • Includes: side handle, depth gauge, tool case, and 4-1/2 in. angle grinder

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.


Assembled Depth (in.)  14.3 in  Assembled Height (in.)  8.8 in 
Assembled Width (in.)  16.9 in  Maximum hole diameter (in.)  3.125 
Product Depth (in.)  12.62 in  Product Height (in.)  13.07 in 
Product Width (in.)  4.53 in 
Amperage (amps)  Blow energy (ft.-lb.)  2.1 
Chuck Size  1-1/8 In.  Chuck Type  SDS-Plus 
Clamshell/Jam pot  Jam pot  Color Family  Teal 
Cord Length (ft.)  8.2  Corded Tool Type  Rotary Drill 
Cordless/Corded  Corded  Drill/ Driver Type  Rotary Drill 
Forward/reverse switch  Forward switch and reverse switch  Maximum Speed (rpm)  1100 
Power Tool Product Type  Corded  Product Weight (lb.)  7.7 lb 
Reconditioned  No  Returnable  90-Day 
Tools Product Type  Power Tool  Variable Speed  Yes 
Warranty / Certifications
Certifications and Listings  1-UL Listed  Manufacturer Warranty  1 Year Warranty 


Rated 4.7 out of 5 by 6 reviewers.
Rated 4.0 out of 5.0 by very good Very good for electromechanical jobs, great weight, very very helpfull for small demolition Jobs June 3, 2014
Rated 4.0 out of 5.0 by Good for medium duty use For a drill that can make a 1-1/8" diameter hole in concrete the Makita is light in weight and compact in size. I can get this hammer drill in spaces where a full size one would not fit. At half the weight of an SDS-Max hammer drill it is also less tiring if having to use it overhead or at shoulder height. Something I greatly dislike about the drill is that there is no trigger locking mechanism to keep the drill from turning on when holding it by the only handle. The trigger is very long and so there is no way to easily hold the drill with one hand without pressing down on the trigger and having the bit spinning. It is a bad trigger design. What I like about the drill is that it has a hammer only, hammer with drilling, and drilling only settings. There is an optional keyless drill chuck available from Makita to turn this into a heavy duty standard power drill. The carry case is the usual mediocre type on expects to get from Makita. The power cord is routed through the same section where drill bits are stored and the drill bits bounce around will carrying the case or transporting it in a truck and they are going to hit against the power cord. I use a piece of dense foam inside the case to protect the power cord from the drill bits. With SDS drill bits there is a lot of run-out so do not expect your holes to be the same size as the drill bit but 1/8" to 1/4" larger in size. October 27, 2014
Rated 5.0 out of 5.0 by Good size for medium work I used to rent these for various jobs but decided to finally buy one after my experience with the rentals. I have used this drill for setting anchors and drilling holes in old concrete and it has worked well. It's not too big to make it hard to handle for horizontal drilling but seems to have enough power to get the job done. I drilled 5/8" dia and smaller holes and had no problem. July 1, 2014
Rated 5.0 out of 5.0 by incredible tool great value ,easy to use, light weight. used an hilti the day before very disappointed . had to drill 20 holes 5/8 in 6 in deep was like a hot knife through butter January 18, 2014
Rated 5.0 out of 5.0 by Excellant tool Inpact and rotary feature are the best I have used. November 19, 2013
2 >>


Standard Shipping includes delivery by small parcel service. Processing time varies by product.

Orders for this item may be expedited for an additional fee.

Other Delivery Options:

Express and Expedited shipping options are also available. Estimated arrival times are available in checkout.

If product is eligible for shipping to AK, HI and US Territories additional transit time and remote surcharges may apply.