Rated 4.1 out of 5 by 50
Rated 5.0 out of 5.0 by Chespi I do recommend this product
After trying different brands I finely found a great Makita 6-1/2" Circular saw, at
Home-Depot ,Home Depot is One of my best stores for shopping all my Power tools, Great!! Service, and always Delivery on time This is the best product that i have ever had is easy to use highly recommend .
October 18, 2016
Rated 5.0 out of 5.0 by Limer Makita track Saw.
This is a good product for the price. The plastic upper saw parts are a concern if dropped. The 118 in long track is not priced competitively priced and the delivery charge is expensive compared to competitive sources with free shipping
July 24, 2016
Rated 4.0 out of 5.0 by duckweed Real convenient to have
This is a great saw to have in my tool trailer. Cuts clean and smooth. The soft start motor is a little slow and touchy - You have to keep a firm finger on the trigger or the motor shuts off. I wish the plunge depth was in inches since I have to site the depth when cutting material. I have never clamped the track - the tacky rubber material on the bottom keeps it right in place.
July 8, 2016
Rated 5.0 out of 5.0 by GB Clean Cuts
After using this saw I can say the cuts are very clean and the saw slides in the rail very easy. The saw dust is minimal if connected to a vacuum and the plunge system is easy to use. The saw's case is big enough to hold the clamps and the rail connectors.
I asked Home Depot to make sure the saw was packed correctly, I was told it would be, and it was not. The saw is loose in its box to rattle around and it broke the box interior. This is an issue for Home Depot to correct and not Makita. The cord should be 3 feet longer and the two rails do not connect smoothly. The instructions from Makita should be upgraded with a few pictures and larger print.
April 28, 2016
Rated 5.0 out of 5.0 by Buddy Very good saw
Works as expected. I did a lot of research on track saws and settled on this one based on its reviews in price. It is plenty strong to cut through any material I've tried including 6/4" thick white oak. It certainly will not replace my tablesaw but is a great option for breaking down sheet goods and larger cross cuts. Happy to have it in my workshop!
June 26, 2016
Rated 4.0 out of 5.0 by novicediyer Not ready to use out of the box
Several adjustments needed in order to get a decent cut. The bevel was not at exactly 0/90 degrees, causing a slight bevel on all my cuts. Also, the blade was a couple degrees out of parallel with the rail guide on the base causing quite a bit of burning on relatively thin maple stock I had.
After fixing both these issues the saw cuts beautifully. The saw left smooth edges and no chipping on maple veneered plywood and (with a blade change) was able to rip 8/4 maple stock.
May 17, 2016
Rated 5.0 out of 5.0 by jgville Precise cuts, simple to use.
Used with the track guide for making precise straight cuts. The produced cuts are as good as those made on my table saw.
The setting for cutting a shallow cut to reduce surface tear out worked well. Once the surface fibers were cut I made a full depth cut. The resulting cut was clean. The material was 1/4" plywood from Home Depot.
At this time I've only used the saw a few times.
June 7, 2016
Rated 5.0 out of 5.0 by SteamyB Does the Job!
I worked on building several DIY kitchen islands and cabinets and this Makita system worked beautifully for cutting our plywood sheets down to precise measurements. I had to make a quick adjustment out of the box to fix a slight bevel. But once that was fixed, we were good. Honestly, I see very little difference between this and the other track saws I've used. Festool. Dewalt. Meh.. I really think that unless your a true woodworker who needs the "BEST" or "BETTER" brands, this Makita set is fine for anyone who does serious remodeling or serious DIY work. I honestly cant tell the difference in cuts or ease of use compared to the other brands. The only thing I noticed was that Festool's saw felt a little more solid, more well-built than this Makita. Well, I purchased the extra length of track as well to rip full sheets, and Ive been using this setup for a full year now.. And so far this track saw has been very durable, consistently cutting great for me. So it seems to be constructed good enough. The price is right for this system too. Cant beat it. In the end though, for those of you out there who need a track saw system, you really cant go wrong with any of the ones I've used (Festool. Dewalt. Makita). They will all do the job and make your life easier. This one happens to be the least expensive!
May 30, 2016