0088381053525

Makita

Model MAC700

Internet #202713487

Store SO SKU #1000489269

2.6 Gal. 2 HP Portable Electrical Hot Dog Air Compressor

$208.99 /each
  • Professional grade, oil-lubed compressor for long life
  • Powerful 2 HP 4-pole motor produces 3.3 CFM at 90 psi
  • Highly rated compressor for overall performance. (see reviews)

Frequently Bought Together

Product Overview

Makita 2.0 HP Air Compressor (MAC700) is equipped with Makita Big Bore engineered pump cylinder and piston for higher output, less noise and improved jobsite performance. The MAC700 delivers industrial power and results with improved durability for tough job site conditions. The MAC700 is powered by a 2.0 HP motor. The Makita Big Bore engineered pump with cast iron cylinder has greater bore and stroke for increased compression, faster recovery and less noise.

California residents: see   Proposition 65 information

  • Low noise, low amp draw and high output
  • Cast iron pump with big bore cylinder and piston is engineered to provide faster recovery time for improved performance
  • Powerful 2 HP 4-pole motor produces 3.3 CFM at 90 psi for increased productivity
  • Pump runs at lower RPM (1,730) resulting in lower noise (80 dB) and improved pump durability
  • Low amperage draw reduces incidences of tripped breakers at start-up
  • Pump is oil-lubricated for cooler running temperatures and reduced wear
  • Roll-bar handle for portability and additional protection
  • Large automotive style industrial air filter for increased air intake and greater efficiency
  • Durable cast iron cylinder reduces wear and increases pump life, removable for easy maintenance
  • Oil sight glass for fast, easy and efficient maintenance
  • Lever handle ball valve - tank drain valve improves upon standard petcock design for easier maintenance
  • Built-in thermal overload for additional motor protection
  • Need help? CLICK HERE to view our Air Compressor Buying Guide
  • Click here for more information on Electronic Recycling Programs

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

21 Questions67 Answers

Customer Questions & Answers

2.6 Gal. 2 HP Portable Electrical Hot Dog Air Compressor
2.6 Gal. 2 HP Portable Electrical Hot Dog Air Compressor

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
 
9 answers

Is this unit wall mountable?

This question is from 2.6 Gal. 2 HP Portable Electrical Hot Dog Air Compressor
Asked by
Southern California
Read all my Q&A
June 10, 2014
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (9)

Asked by
Lawrenceville, GA, USA
Read all my Q&A
August 16, 2016
Answer: 
I don't see why not if your supports are heavy duty enough.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Read all my Q&A
January 25, 2016
Answer: 
Yes, it is wall mountable, but you need to consider the following things:
- It is very heavy at 52 lbs, so shelf hardware needs to be very strong to support it.
- Mounting it on a shelf makes the regulator difficult or impossible to see in its default position.
- You need to build a fence on the shelf so that the compressor does not vibrate off the shelf.
User submitted photo
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Corinth, New York
Read all my Q&A
Home Improvement Profile: DIYer
September 6, 2015
Answer: 
I think if you removed the the rubber feet and built a wall bracket to mount this compressor you could!
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Read all my Q&A
April 24, 2015
Answer: 
I suspect it would be with a bit adapting. The base has metal strap legs with rubber cushions underneath. I bet one could bolt the unit to a shelf through the legs and secure it at the wall this way. if you look at pictures of the unit I think you could determine the feasibility of this for yourself.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Pueblo
Read all my Q&A
March 24, 2015
Answer: 
If you built a good sturdy shelf I think it would do fine, but keep in mind the weight of the compressor it's heavy.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Howell, MI
Read all my Q&A
December 10, 2014
Answer: 
I don't think it is. The shape doesn't lend itself well to that application
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Gainesville, Florida
Read all my Q&A
Home Improvement Profile: DIYer
September 30, 2014
Answer: 
You could custom mount this to a wall, but there is no included provision for mounting. You could probably install a sturdy shelf and then bungee cord the unit on the shelf so it does not vibrate off. I would not put it any higher than waist height or so for safety.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Allen, TX, USA
Read all my Q&A
August 13, 2014
Answer: 
It is Very Heavy I would not attempt to hang it on a wall no
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Read all my Q&A
June 11, 2014
Answer: 
No, the Makita 2.6-Gal. 2 HP Portable Electrical Hot Dog Air Compressor (MAC700) cannot be mounted onto a wall.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
9 answers

will a 20 amp generator operate this compressor

This question is from 2.6 Gal. 2 HP Portable Electrical Hot Dog Air Compressor
Asked by
mack
mesa az
September 23, 2012
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (9)

Asked by
Lawrenceville, GA, USA
Read all my Q&A
August 16, 2016
Answer: 
It is supposed to. I run it off a 15 amp breaker service in my house with no problems.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

February 11, 2016
Answer: 
If using a generator I would suggest using one with a pure sine wave output. These are generally a little more expensive, but will not damage sensitive electronics.
-1point
0out of 1found this answer helpful.
Was this helpful?helpful0unhelpful1

Asked by
Corinth, New York
Read all my Q&A
Home Improvement Profile: DIYer
September 6, 2015
Answer: 
I would think so! I am running this on an old fuse (15 amp) box and it hasn't blown a fuse yet! I was surprised, but that's one of the reasons I bought this one! Low starting amp draw!
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
McAlester, OK 74501, USA
Read all my Q&A
April 30, 2013
Answer: 
I don't know about a generator. The instructions say plug into a line with at least a 15 amp breaker.
-2points
0out of 2found this answer helpful.
Was this helpful?helpful0unhelpful2

Asked by
Seattle, WA, USA
Read all my Q&A
February 5, 2013
Answer: 
i assume that you are talking about a 2400 watt generator? Probably since most generators will actually give a little more than the rated number for a few seconds. Enough to get the compressor to turn over. My little hot dog compressor runs fine on a 2800 watt inverter running off 12 volt batteries. I am pretty sure the hot dog is rated at a much lower draw than 20 amps at 120 volts so you should be Read More
i assume that you are talking about a 2400 watt generator? Probably since most generators will actually give a little more than the rated number for a few seconds. Enough to get the compressor to turn over. My little hot dog compressor runs fine on a 2800 watt inverter running off 12 volt batteries. I am pretty sure the hot dog is rated at a much lower draw than 20 amps at 120 volts so you should be fine. 20 amps x 120 volts = 2800 watts Read Less
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Kentucky
Read all my Q&A
October 24, 2012
Answer: 
All signs point to yes, this compressor is rated somewhere around 12.5amps I believe, under the 15 amp mark, one of the nice things for those who suffer from 15 amp circuits and always throw breakers on start-ups from other similarly sized compressors. It doesn't even dim the lights in my garage, and I run on a 20amp circuit.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Pennsylvania, USA
Read all my Q&A
September 24, 2012
Answer: 
NO Problem .I can run mine with a small honda EU 2000 15 amp , starts and runs without a problem
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
Read all my Q&A
September 24, 2012
Answer: 
Makita does not recommend using generators with our compressors. However, if you must use a generator, a 20 AMP high quality generator should be able to power the MAC700.
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0

Asked by
Ohio
Read all my Q&A
September 24, 2012
Answer: 
I have never ran my compressor on a generator. I always run it on a 20 amp circuit and have never had any trouble with it.
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0
 
7 answers

What diameter rubber hose does this take?

This question is from 2.6 Gal. 2 HP Portable Electrical Hot Dog Air Compressor
Asked by
coopbar
January 22, 2013
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (7)

Asked by
Lawrenceville, GA, USA
Read all my Q&A
August 16, 2016
Answer: 
Any size you want from 1/8" up. you would just need to get necessary adapter fittings to allow connection to compressor.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Read all my Q&A
June 10, 2013
Answer: 
my 1/4 inch M socket went right into the supplied fitting.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Lexington, KY, USA
Read all my Q&A
May 7, 2013
Answer: 
I used a 3/8 " hose w/ a 1/4" connector. Also I recommend a rubber hose vs. PVC for durability
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0

Asked by
PA
Read all my Q&A
May 3, 2013
Answer: 
It does not take a rubber hose. The compressor has an automatic style air coupler, which accepts 1/4" industrial interchange plugs (and maybe some others, I did not try it).
-4points
0out of 4found this answer helpful.
Was this helpful?helpful0unhelpful4

Asked by
McAlester, OK 74501, USA
Read all my Q&A
April 30, 2013
Answer: 
You can use any size you want. I used 3/8" on mine. Because of the small size of the tank, I wouldn't use anything bigger than 3/8".
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Seattle, WA, USA
Read all my Q&A
February 5, 2013
Answer: 
1/4 in good, 1/2 inch is fine. 3/4 over kill. not enough capcity to run air tools for longer than short burst. good for filling tires.
0points
1out of 2found this answer helpful.
Was this helpful?helpful1unhelpful1

Asked by
Read all my Q&A
January 24, 2013
Answer: 
¼” or 3/8”
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0
 
6 answers

what is the weight of this unit

This question is from 2.6 Gal. 2 HP Portable Electrical Hot Dog Air Compressor
Asked by
searching
March 22, 2013
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (6)

Asked by
Allen, TX, USA
Read all my Q&A
August 13, 2014
Answer: 
right around 50 lbs. It is not a light unit but works great and quality parts were used to make it efficient and quite
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
Lexington, KY, USA
Read all my Q&A
May 7, 2013
Answer: 
61 lbs
-1point
0out of 1found this answer helpful.
Was this helpful?helpful0unhelpful1

Asked by
PA
Read all my Q&A
May 3, 2013
Answer: 
52 lbs.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
McAlester, OK 74501, USA
Read all my Q&A
April 30, 2013
Answer: 
Approximately 55 pounds.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Riverside, Ca.USA
Read all my Q&A
April 21, 2013
Answer: 
close to 55 lbs
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Read all my Q&A
March 22, 2013
Answer: 
The MAC700 2.0 HP* Air Compressor has a net weight of 52 pounds.
+3points
3out of 3found this answer helpful.
Was this helpful?helpful3unhelpful0
2 »
  • 2016-08-24 T13:41:41.800-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_202713487, prod, sort_default
2 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 219ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 4.7 out of 5 by 151 reviewers.
Rated 5.0 out of 5.0 by Air compressor Quiet Works nicely Fast fill Have not any issues so far July 20, 2016
Rated 3.0 out of 5.0 by Switch issues Owned this compressor for about 6 months and have only a few hours use on it. Now, it doesn't turn on and looking at online blogs see that this appears to be an ongoing problem with this model. Under warranty but still a pain to have to take it to the repair center. Luckily I have other compressors to use. I was thinking of replacing one of my older twin tank compressors with a twin tank Makita but now I'm more than a little hesitant. July 4, 2016
Rated 5.0 out of 5.0 by MAC 700 Compressor Review I purchased this ship to store, delivered on time to Home Depot. I got it on sale for $175. This is a solidly built unit, weighing around 50 pounds. Another reviewer had posted excellent set up and break-in instructions which are better than the ones included. There are several helpful online videos as well. Remove temporary white oil filler cap. Fill the oil only to the red dot on the clear oil level indicator. Install black filler cap. Do not over tighten and do not use thread tape. Install the silver air filter, using thread tape. Open the air valve at the bottom of the tank all the way, run for 20 minutes and you are done! I changed out the oil as it was a bit dirty afterwards. The unit comes up to pressure quickly via the big bore 2 HP motor, and is much quieter than non-oiled compressors. It takes about a minute to get to 130 PSI. I use it mostly for filling the tires on my boat trailer, as an air blower and it works great. I always empty the tank when done. It has a 2.6 gallon tank, so it’s not really suited for high volume air tools, but it is perfect for someone that needs a quality unit that does not take up much space. It fits on the bottom shelf under my work bench. A 50 foot air hose reaches everything. Over all, this is a great unit. My only minor issue was when I went to go pick it up, the clerk brought it out with the box upside down. This caused some left over oil from factory testing to leak past the temporary oil filler plug and it got under the motor cover. Otherwise the unit came in perfect condition. February 26, 2016
Rated 5.0 out of 5.0 by Excellent quality air compressor The Makita MAC700 air compressor that I ordered from Home Depot is of superior quality. It is manufactured in Taiwan which has similar quality values relative to the United States and Japan. If you are looking for a small portable air compressor of exceptional value and craftsmanship, with an oil sump for extended life and quality components not manufactured in China, then please purchase the Makita MAC700. This air compressor works great for small shop jobs and know it will have years of good service. If you are looking for something more commercial, then I would upgrade to the next size Makita air compressor, which Home Depot stocks in their stores - again, very good quality. May 23, 2016
Rated 4.0 out of 5.0 by Good dog Runs as speced. Quiet and performs well The write up that comes with the compressor is poor Doesn't say how much oil to add or what parts go where Oh well June 7, 2016
Rated 5.0 out of 5.0 by Very solid air compressor... This compressor is oil-based, so it requires adding the compressor oil (included) and allowing it to run for 20 minutes with the tank valve open to break in the compressor unit. But that is quickly accomplished and after that, it is ready to use. I found the compressor to provide plenty of air volume/pressure and it is quiet (as compressors go). I usually like to point out one shortcoming, but I really don't see one with this unit. It's been great. April 26, 2016
Rated 5.0 out of 5.0 by Fast and quiet Fills the tank faster than I expected and is quiet compared to others. I'm pretty happy with this compressor May 10, 2016
Rated 5.0 out of 5.0 by Very quiet. Very quiet. Fills up fast. I only use it to fill my tires but it's great May 3, 2016
  • 2016-08-05 T23:42:32.593-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_151, tr_151
  • loc_en_US, sid_202713487, prod, sort_default
2 3 4 5 6 >>
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 106ms
  • REVIEWS, PRODUCT