Makita 4 1/2 in. Sandwich Tuck Point Blade-A-95912 at The Home Depot
Discontinued

Makita

Model # A-95912

Internet # 204318049

Store SKU # 1000016476

4 1/2 in. Sandwich Tuck Point Blade


Makita 4 1/2 in. Sandwich Tuck Point Blade
 

This item has been discontinued.
The Home Depot no longer carries this specific product.

$49.97 / each
Loading...

PRODUCT OVERVIEW

Model # A-95912

Internet # 204318049

Store SKU # 1000016476

The Makita 4-1/2 in. Dual Sandwich Diamond Tuck Point Blade is designed for faster more efficient cuts than standard solid tuck point blades. The design is engineered to create less dust than solid equivalent blades. The Dual Sandwich Diamond Tuck Point Blade is ideal for the removal of mortar joints. For added versatility, the blade can be used wet or dry.

  • Dual sandwich design allows for faster and more efficient cuts
  • Cutting action of the dual sandwich design is engineered to create less dust than solid tuck point blades
  • For use in the removal of mortar joints
  • Can be used wet or dry for added versatility

SPECIFICATIONS

Assembled Depth (in.)  6.75 in  Assembled Height (in.)  7.75 in 
Assembled Width (in.)  .25 in  Blade Diameter  4-1/2 in 
Color Family  Silver  Material Cut  Masonry/Block 
Number in Package  Power Tool Accessory Type  Blade 
Power Tool Product Type  Power Tool Accessory  Returnable  90-Day 
Rim Type  Segmented 

CUSTOMER REVIEWS

Rated 5 out of 5 by 1 reviewer.
Rated 5 out of 5 by Get the correct size. Before getting the blade, measure the distance between bricks. (The with of the mortar joint.) Then get the closest sized blade that is smaller then that distance. If you get too thick of a blade, it will cut into the brick. If you get too thin of a blade, it is harder to keep it aligned with the mortar joint. But you can work with too thin of a blade. with to thick of a blade, you are out of luck. I had two different sets of bricks, done at different times. The mortar joints were different thickness. The blade that worked perfect on the older work was just a bit too tight for the newer work. Because I cleaned up the older work first, I didn't discover this until I started on the newer work. So I ended up needing a second blade. I didn't have a log of joints to repair in either section, so I can not comment on blade life. Both blades show that they have been used, but neither is worn. They are just bearly broke in... If your grinder has it as an accessory, pick up the concrete cutting guard and dust collector. It gives you better depth control, as well as cleaner working conductions. In any case, spend the money to get a filter bag for your shop vac. It both saves wear and tare on the shop vac, as well as preventing dust from traveling through the show vac. Be sure to wear eye protection and a dust mask. Hearing protection is also a good idea. Don't get discouraged if you have problems controlling the grinder when you start. It takes a bit of practice, but soon you will be zipping along! July 7, 2014
1-1 of 1

SHIPPING AND DELIVERY OPTIONS

Standard Shipping includes delivery by small parcel service. Processing time varies by product.


Orders for this item may be expedited for an additional fee.


Other Delivery Options:

Express and Expedited shipping options are also available. Estimated arrival times are available in checkout.


If product is eligible for shipping to AK, HI and US Territories additional transit time and remote surcharges may apply.