0088381053532

Makita

Model MAC2400

Internet #202713485

Store SO SKU #1000489256

4.2 Gal. 2.5 HP Portable Electrical 2-Stack Air Compressor

$299.00 /each
  • Professional grade, oil-lubed compressor for long life
  • Powerful 2.5 HP 4-pole motor produces 4.2 CFM at 90 psi
  • Highly rated compressor for overall performance. (see reviews)

Frequently Bought Together

Product Overview

Makita 2.5 HP Air Compressor is equipped with Makita Big Bore engineered pump cylinder and piston for higher output for 2 nailers, with less noise and improved job site performance. The MAC2400 delivers industrial power and results with improved durability for tough job site conditions. The MAC2400 is powered by a 2.5 HP motor. The Makita Big Bore engineered pump with cast iron cylinder has greater bore and stroke for increased compression, faster recovery and less noise.

California residents: see   Proposition 65 information

  • Oil lubricated pump runs quietly and reliably
  • Cast iron pump with big bore cylinder and piston is engineered to provide faster recovery time for improved performance
  • Powerful 2.5 HP 4-pole motor produces 4.2 CFM at 90 psi for increased productivity
  • Pump runs at lower RPM (1,730) resulting in lower noise (79 dB) and improved pump durability
  • Low amp draw reduces incidences of tripped breakers at start-up
  • Pump is oil-lubricated for cooler running temperatures and reduced wear
  • Roll-cage construction provides complete protection to withstand extreme jobsite environments
  • Large automotive style industrial air filter for increased air intake and greater efficiency
  • Durable cast iron cylinder reduces wear and increases pump life, removable for easy maintenance
  • Oil sight glass for fast, easy and efficient maintenance
  • Lever handle ball valve-tank drain valve improves upon standard petcock design for easier maintenance
  • Built-in thermal overload for additional motor protection
  • Need help? CLICK HERE to view our Air Compressor Buying Guide
  • Click here for more information on Electronic Recycling Programs

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

27 Questions73 Answers

Customer Questions & Answers

4.2 Gal. 2.5 HP Portable Electrical 2-Stack Air Compressor
4.2 Gal. 2.5 HP Portable Electrical 2-Stack Air Compressor

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
 
7 answers

Does anyone use this for spraying paint, stain or finishes with a HPLV unit?

This question is from 4.2 Gal. 2.5 HP Portable Electrical 2-Stack Air Compressor
Asked by
Scooter B
Oklahoma City
April 14, 2013
I am looking for a larger more capable air compressor than my little Great River unit in regards to being able to use with a HPLV spray gun. My little Great River unit works fine for filling tires, blowing dust out of woodworking equipment etc but it can't maintain effective working pressure past for some continuous spraying related functions for a full minute.

I don't want to shell out $300 for something that isn't going to do much better under continuous spraying conditions. The low noise floor would definitely be welcomed however but only under more continuous use settings.
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (7)

Asked by
Read all my Q&A
August 3, 2014
Answer: 
Thanks for all the answers. I just noticed it appears I got my "wires crossed" in the original question.
While I do have one entry level HPLV made by Rockler marketed to woodworkers it came with it's own compressor and larger diameter hose.
The spray gun I was really asking about for this compressor is definitely a cheap Chinese knock off of a fairly common gun used by interior house painters but I Read More
Thanks for all the answers. I just noticed it appears I got my "wires crossed" in the original question.
While I do have one entry level HPLV made by Rockler marketed to woodworkers it came with it's own compressor and larger diameter hose.
The spray gun I was really asking about for this compressor is definitely a cheap Chinese knock off of a fairly common gun used by interior house painters but I forget the model number. if I remember right the aluminium paint container holds about 2 quarts of paint. The gun is pretty well adjustable and delivers decent results once set up right and as long as the compressor maintains adequate pressure. You just have to be very conscious of when the pressure nears that loss of performance threshold to get consistent results on larger surfaces like walls. (I have only used it on smaller over all surface areas so far)
With the current two smaller compressors I have I have to stop around every four to five minutes (depending on how tight I have the needle set regulating outflow) to wait for the pressure to build back up. Read Less
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Read all my Q&A
July 30, 2014
Answer: 
HPLV paint guns use large amounts of air. This compressor would not be able to keep up with one. You will need a 5 HP compressor to run a professional HPLV paint gun properly.
However, there are some cheap paint guns that claim to be HPLV types that really aren't. They have small nozzles and do not use nearly as much air as a true HPLV gun. If you have one of these, this compressor probably will run Read More
HPLV paint guns use large amounts of air. This compressor would not be able to keep up with one. You will need a 5 HP compressor to run a professional HPLV paint gun properly.
However, there are some cheap paint guns that claim to be HPLV types that really aren't. They have small nozzles and do not use nearly as much air as a true HPLV gun. If you have one of these, this compressor probably will run it.
Based on your previous experience with your smaller Great River compressor, it would appear that you have a real HPLV gun, so this compressor would not be sufficient to operate it. Read Less
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
Oklahoma City
Read all my Q&A
Home Improvement Profile: DIYer
April 9, 2014
Answer: 
Thanks for the responses.
I did run across this one in my research and is on the top of my wish list when I do buy one. Budget is stretched pretty thin on the house rebuild/remodel so I would like to wait to find one on sale or with a good rebate. If not I will wait until I absolutely need it rather than wanting it for more conveniences/efficiency.
I do have a small HVLP spray gun as well that works Read More
Thanks for the responses.
I did run across this one in my research and is on the top of my wish list when I do buy one. Budget is stretched pretty thin on the house rebuild/remodel so I would like to wait to find one on sale or with a good rebate. If not I will wait until I absolutely need it rather than wanting it for more conveniences/efficiency.
I do have a small HVLP spray gun as well that works fine for medium to larger projects but has much less ability to narrow the field of paint spray if need.
No further answers needed unless you see one listed on sale or if Makita offers a good rebate on this compressor at some point. A close out price for a newer model would be ideal for me. Read Less
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

April 8, 2014
Answer: 
I have used this with a hvlp sprayer. I painted my entire kitchen and living room. The compressor kicks on often but doesn't have a problem maintaining proper pressure. The low noise level is great.
+5points
5out of 5found this answer helpful.
Was this helpful?helpful5unhelpful0

Asked by
Arkansas, USA
Read all my Q&A
August 9, 2013
Answer: 
You will be happy with this Makita, it is quiet but has a lot of power.
0points
1out of 2found this answer helpful.
Was this helpful?helpful1unhelpful1

Asked by
Savannah, GA, USA
Read all my Q&A
May 21, 2013
Answer: 
As long as you are not "painting entire cars" or other high volume jobs the unit should meet your needs. But if you are doing large volume painting than a larger capacity compressor would be required
+5points
5out of 5found this answer helpful.
Was this helpful?helpful5unhelpful0

Asked by
Read all my Q&A
April 15, 2013
Answer: 
The Makita MAC2400 2.5HP Air Compressor has a powerful 4-pole motor that provides lower noise, easier start-ups and longer durability. The MAC2400 has a 4.2 gallon tank and a cast iron cylinder pump that provides 4.2 CFM at 90 PSI and 4.8 CFM at 40 PSI. For applications with other tools, please refer to the owner’s manual for the tool’s CFM and PSI requirements.
-9points
1out of 11found this answer helpful.
Was this helpful?helpful1unhelpful10
 
6 answers

The oil for the motor can you use automotive synthetic?

This question is from 4.2 Gal. 2.5 HP Portable Electrical 2-Stack Air Compressor
Asked by
Bob G.
Wichita ks.
April 21, 2013
new to compressors ,the oil for the motor ,has to be the compressor oil only???
+1point
1out of 1found this question helpful.
Was this helpful?helpful1unhelpful0

Answers (6)

Asked by
Read all my Q&A
March 4, 2014
Answer: 
Absolutely not.
Automobile engine uses pump based (pressure) forced oil circulation system with an oil filter. In order to let the oil filter catch the metal shavings and particles, detergent or emosifier or dispersant is used to suspend them so they could be carried to the filter and stuck there. On the other hand, small air compressor uses splash base oil lubrication system without filter, which let
Read More
Absolutely not.
Automobile engine uses pump based (pressure) forced oil circulation system with an oil filter. In order to let the oil filter catch the metal shavings and particles, detergent or emosifier or dispersant is used to suspend them so they could be carried to the filter and stuck there. On the other hand, small air compressor uses splash base oil lubrication system without filter, which let the metal shavings and particles sink to the bottom of the oil sump and stay there, while clear oil being splashed up to lubricate all the machine parts that need to be lubricated. When you use automobile engine oil in small air compressor, detergent or emosifier or dispersant in the oil could foam or produce suds or gunk in small air compressor due to the splash or reciprocating motion of the machine parts, as well as suspend all the metal particles in the oil to damage the compressor. In summary, the key is the detergent or dispersant in the oil. Automobile engine oil has it, while small air compressor oil does not have it.
Disclaimer: I am not a expert, not even a engineer or mechanics. So I just follow the manufacturer's instruction and try my best to understand it in the same time.
Read Less
+4points
4out of 4found this answer helpful.
Was this helpful?helpful4unhelpful0

Asked by
Arkansas, USA
Read all my Q&A
August 9, 2013
Answer: 
You would have to be very careful doing this, consult the owner's manual for weights and guidance in this.
-1point
0out of 1found this answer helpful.
Was this helpful?helpful0unhelpful1

June 11, 2013
Answer: 
yes as this will not void your warranty.
-4points
0out of 4found this answer helpful.
Was this helpful?helpful0unhelpful4

Asked by
Savannah, GA, USA
Read all my Q&A
May 21, 2013
Answer: 
The oil for the compressor must be specific for use in the compressor. It is radially available at Home Depot in the Tool Dept. as well as other sources
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

May 21, 2013
Answer: 
I think it needs to be compressor only oil. Or at least needs to be a low detergent/non-detergent type oil. It's only a little more money for compressor oil so why take the chance?
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
Read all my Q&A
April 22, 2013
Answer: 
All Makita compressors use 30 weight non-detergent compressor oil.
+10points
10out of 10found this answer helpful.
Was this helpful?helpful10unhelpful0
 
5 answers

Will this compressor fill truck tires to 90psi?

This question is from 4.2 Gal. 2.5 HP Portable Electrical 2-Stack Air Compressor
Asked by
Read all my Q&A
November 1, 2014
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (5)

Asked by
Greenfield, MA
Read all my Q&A
April 29, 2015
Answer: 
Yes, it runs until it reaches 130psi, then turns on again when it drops to 100psi. So you can rely on at least 100psi.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Pa
Read all my Q&A
March 3, 2015
Answer: 
Heck (non-inappropriate) Yeah!
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
cloudcroft,nm
Read all my Q&A
Home Improvement Profile: DIYer
November 8, 2014
Answer: 
Yes, no problem!
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Read all my Q&A
November 4, 2014
Answer: 
Yes, the Makita 4.2 gal. 2.5 HP Portable Electrical Twin Stack Air Compressor (MAC2400) has a powerful 2.5 HP 4-pole motor, which produces 4.2 CFM at 90 psi for increased productivity and faster recovery time.
-1point
0out of 1found this answer helpful.
Was this helpful?helpful0unhelpful1

Asked by
Douglasville, GA, USA
Read all my Q&A
Home Improvement Profile: DIYer
November 2, 2014
Answer: 
It depends .how large is this truck tire? If it is a commercial size tire possibly . It's not the psi it's the volume and as this item does not have a very large storage tank it could do it but at the expense of the pump.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
5 answers

Air impact tools

This question is from 4.2 Gal. 2.5 HP Portable Electrical 2-Stack Air Compressor
Asked by
Las Cruces,NM
Read all my Q&A
May 9, 2014
Will this run inmpact tools? If so, what air impact tools besides air nailers will this operate?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (5)

Asked by
Greenfield, MA
Read all my Q&A
April 29, 2015
Answer: 
You need to check the requirements of the tools you want to operate. This model produces 4.2CFM at 90psi, with a 50% duty cycle. It will run most air tools. If you need to run something like a large impact wrench for extended periods of time you probably need a larger stationary compressor.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Douglasville, GA, USA
Read all my Q&A
Home Improvement Profile: DIYer
December 7, 2014
Answer: 
Yes any air tool u own
-3points
0out of 3found this answer helpful.
Was this helpful?helpful0unhelpful3

Asked by
Read all my Q&A
July 30, 2014
Answer: 
This compressor will run most impact tools. Impact tools are used for only a few seconds at a time, so they don't use much air on average and even a small compressor will keep up with them.
Where you will run into problems is with air tools that operate over longer periods of time. For example, an air sander, die grinder, or air drill will quickly deplete the the air pressure in a small (less than 60 Read More
This compressor will run most impact tools. Impact tools are used for only a few seconds at a time, so they don't use much air on average and even a small compressor will keep up with them.
Where you will run into problems is with air tools that operate over longer periods of time. For example, an air sander, die grinder, or air drill will quickly deplete the the air pressure in a small (less than 60 gallons) tank and the compressor will not be able to maintain its pressure. You will need at least a 5 HP compressor that is able to deliver a minimum of 18 cubic feet per minute to keep up with these continuous-use tools. Read Less
+5points
5out of 5found this answer helpful.
Was this helpful?helpful5unhelpful0

Asked by
Pleasanton, CA
Read all my Q&A
May 20, 2014
Answer: 
It will run impact tools just fine. Running something like a sander will push it, however.
0points
1out of 2found this answer helpful.
Was this helpful?helpful1unhelpful1

Asked by
Read all my Q&A
May 12, 2014
Answer: 
Yes, the 4.2-Gal. 2.5 HP Portable Electrical Twin Stack Air Compressor (MAC2400) is compatible with other impact tools. For operation of impact tools, please read the owner’s manual of each tool for air consumption requirements. The Makita MAC2400 provides 4.2 CFM at 90 PSI, and 4.8 CFM at 40 PSI with a 130 PSI maximum pressure.
0points
2out of 4found this answer helpful.
Was this helpful?helpful2unhelpful2
2 3 »
  • 2016-08-11 T17:51:11.293-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_202713485, prod, sort_default
2 3 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 44ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 4.7 out of 5 by 180 reviewers.
Rated 5.0 out of 5.0 by One Nice compressor ! I purchased this MAC 2400 because I grew tired of a pancake style compressor I had. This one fills to capacity in less than 2 minutes and will supply most DYI homeowners with all the air they will ever need for their jobs. It's quiet too. I would recommend putting it on a dolly to make it easier to move to point of use. Just be sure to follow set up directions prior to use. Overall, great product! August 2, 2016
Rated 5.0 out of 5.0 by good buy heavy duty build compressor, is on heavy side,well built compressor, is worth to pay the extra money for quality of this product. I only had it for a month so I can not tell you how durable it is. the good thing about home depot is that you can return product to store if not satisfied. overall I'm very impressed with the quality of this product, I wish it was a little bit more quiet since I used indoor. but is not bad compared to other louder compressors. July 27, 2016
Rated 5.0 out of 5.0 by Quiet,efficient. Out of all the portable air compressors I've owned in the last 4 decades this one is by far the quietest and has the best recovery. It also weighs a bit less than the other 2 or 3 in its class. Good buy. July 19, 2016
Rated 4.0 out of 5.0 by Nice compressor, but watch for the damage from shipping. Read the reviews online about this compressor. It is heavy compared to my old compressor but the capacity is larger also. Started up, did all the break in that is required and used it for about an hour or so...I was very happy with it. The only thing (which I have read from others) is the packaging when shipped does not protect it as good as it should. My compressor had a dent in one of the cylinders, but I choose to keep it instead of returning it because odds I might get a good one, one with the same issue or worse. The dent does not effect the it except for looks...overall I would recommend it. Wished HD stocked it, so I did not have the small issue. May 10, 2016
Rated 5.0 out of 5.0 by Quality small air compressor This is a well built great functioning compressor. Considering the price, it is also a very good deal. The cycle time is short, and it is very quiet in operation. Highly recommended. July 5, 2016
Rated 4.0 out of 5.0 by Makita air compressor This compressor far exceeds the Craftsman that I previously had. It is very quiet, quick to get pressure up, and adequate for the jobs that i have assigned to it. The only downside is its weight. I made a dolly so that I can easily wheel it around the garage. June 28, 2016
Rated 5.0 out of 5.0 by Great work compressor I was a bit skeptical at first, ive had a few different compressor in the last few years that seem to give out after a few months, We've had this one some weeks now and my carpenters love it, very quite and keeps 2 nail guns working full time. as of now its working great with no cons. June 28, 2016
Rated 4.0 out of 5.0 by Makita air compressor This is a great air compressor. Quiet, smooth, and powerful to power all my air tools and accessories. I just wish it was a bit lighter. Overall, very pleased with my purchase. June 28, 2016
  • 2016-08-05 T23:42:15.690-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_180, tr_180
  • loc_en_US, sid_202713485, prod, sort_default
2 3 4 5  ... 7 >>
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 17ms
  • REVIEWS, PRODUCT