0088381053549

Makita

Model MAC5200

Internet #202713486

Store SKU #563303

Store SO SKU #1000469237

5.2 Gal. 3.0 HP Electric Single Tank Air Compressor

$349.00 /each
  • Professional grade, oil-lubed compressor for long life
  • 3 HP motor produces 6.5 CFM at 90 psi for increased productivity
  • Highly rated compressor for overall performance. (see reviews)

Frequently Bought Together

Product Overview

Makita's 3.0 HP Air Compressor is equipped with Makita's Big Bore engineered pump cylinder and piston for higher output for two nailers, with less noise and improved jobsite performance. The MAC5200 delivers industrial power and results with improved durability and includes rugged wheels and folding handle for easy transport. The MAC5200 is powered by a 3.0 HP motor with built-in thermal overload for additional protection. The Makita Big Bore engineered pump with cast iron cylinder has greater bore and stroke for increased compression, faster recovery and less noise.

California residents: see   Proposition 65 information

  • Cast iron pump with big bore cylinder and piston is engineered to provide faster recovery time for improved performance
  • Powerful 3 HP motor produces 6.5 CFM at 90 psi for increased productivity
  • Pump is oil-lubricated for cooler running temperatures and reduced wear
  • Durable cast iron cylinder reduces wear and increases pump life, removable for easy maintenance
  • Folding handle with low profile design for easy storage with handle folded
  • Rugged wheels for jobsite portability
  • Built-in storage compartment conveniently stores air fittings and accessories
  • Air hose wrap stores 50 ft. of 3/8 in. air hose with handle folded or upright
  • Copper finned discharge tubing for increased heat dissipation and reduced water in the tank
  • Tool hangers store tools when not in use
  • Large automotive style industrial air filter for increased air intake and greater efficiency
  • Roll cage construction for extra protection to pump and motor assembly
  • Oil sight glass for fast, easy and efficient maintenance
  • Lever handle ball valve - tank drain valve improves upon standard petcock design for easier maintenance
  • Convenient oil drain at the front of the pump for easy access
  • Built-in thermal overload for additional motor protection
  • 1 year warranty
  • Includes: compressor oil (181122-A), 1/4 in. universal quick coupler (447013-E)
  • Need help? CLICK HERE to view our Air Compressor Buying Guide
  • Click here for more information on Electronic Recycling Programs

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

40 Questions93 Answers

Customer Questions & Answers

5.2 Gal. 3.0 HP Electric Single Tank Air Compressor
5.2 Gal. 3.0 HP Electric Single Tank Air Compressor

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
 
7 answers

Will this compressor power an impact wrench for use on compact tractors and related equipment?

This question is from 5.2 Gal. 3.0 HP Electric Single Tank Air Compressor
Asked by
TimW
Tennessee
January 17, 2012
I plan to use this for tire inflation and removal of parts (mower blades, tiller blades) and tires on my subcompact tractor. I want to know if it has the air flow to provide sufficient torque to remove the bolts on this kind of equipment.
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (7)

Asked by
Maine
Read all my Q&A
June 18, 2013
Answer: 
I have had success for light to moderate duty with either a 3/8" or 1/2" impact gun rated for the units cfm/psi. I would think the answer would be yes. Suggest seeing what others have to say from their experience.
+5points
5out of 5found this answer helpful.
Was this helpful?helpful5unhelpful0

Asked by
Read all my Q&A
October 30, 2012
Answer: 
Yes, If you use automotive class air tools.
0points
2out of 4found this answer helpful.
Was this helpful?helpful2unhelpful2

Asked by
McQueeney, TX, USA
Read all my Q&A
September 25, 2012
Answer: 
I would recommend a compressor with a larger tank. You woud be able to fill tires, however, the compressor would have to cycle/run almost continuosly to accomplish this task. As for an impact wrench, I do not think this model would be best for this task. When the tank is at maximum pressure, it would power the tool fine and most likely be able to break the bolts loose. The problem occurs after the Read More
I would recommend a compressor with a larger tank. You woud be able to fill tires, however, the compressor would have to cycle/run almost continuosly to accomplish this task. As for an impact wrench, I do not think this model would be best for this task. When the tank is at maximum pressure, it would power the tool fine and most likely be able to break the bolts loose. The problem occurs after the initial surge of air and the volume of air impact wrenches use. I do not believe that the compressor would be able to keep up with the tools air requirements with the size of the tank and the pump volume. Read Less
+4points
6out of 8found this answer helpful.
Was this helpful?helpful6unhelpful2

Asked by
pikecity
August 12, 2012
Answer: 
The rated "air flow" in CFM on this device is 6.5 @ 90 PSIG. You need to find out what your tools' CFM rating is and compare it to the compressor's. If it's 6.5 @ 90 or LESS then you're good-to-go. If it's higher (i.e. 7.0 @ 90) then you'll have problems: either it won't run or it'll run and stop while the compressor builds pressure back up (not good for the compressor over long periods of time). Also, Read More
The rated "air flow" in CFM on this device is 6.5 @ 90 PSIG. You need to find out what your tools' CFM rating is and compare it to the compressor's. If it's 6.5 @ 90 or LESS then you're good-to-go. If it's higher (i.e. 7.0 @ 90) then you'll have problems: either it won't run or it'll run and stop while the compressor builds pressure back up (not good for the compressor over long periods of time). Also, the size of your hose/couplings/in-line-filters will greatly affect the air flow (what good is 4 lane highway that goes through a 1 lane tunnel every 1/4 mile?) so use the largest couplings/hoses that will fit the compressors output ports. Have fun! Read Less
+9points
9out of 9found this answer helpful.
Was this helpful?helpful9unhelpful0

Asked by
Read all my Q&A
January 27, 2012
Answer: 
I think you will need a compresssor with a lot more tank volume. It won't be able to keep caught up with air wrenches and filling tractor tires.
-1point
2out of 5found this answer helpful.
Was this helpful?helpful2unhelpful3

Asked by
Read all my Q&A
January 19, 2012
Answer: 
Makita MAC5200 3.0 HP Air Compressor provides 6.5 CFM at 90 PSI and 6.9 CFM at 40 PSI. Maximum pressure output is 140 PSI. The compressor has a 5.2 gallon tank and can provide power for up to two faming nailers simultaneously. For information on other applications, please read the tool owners manual for air consumption requirements.
-8points
9out of 26found this answer helpful.
Was this helpful?helpful9unhelpful17

Asked by
Sonora
Read all my Q&A
January 18, 2012
Answer: 
Yes, but only in very short durations.
+4points
5out of 6found this answer helpful.
Was this helpful?helpful5unhelpful1
 
6 answers

Question for anyone who OWNS this compressor: Does it 'trip' your 15 Amp circuit breaker?

This question is from 5.2 Gal. 3.0 HP Electric Single Tank Air Compressor
Asked by
TX
Read all my Q&A
June 19, 2015
I know its stated 'draw' is 13.2 amps, but just wanted to hear from some Owners, Thanks!
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (6)

July 27, 2016
Answer: 
Yes, especially on cold days or with a tank that is nearly full (both situations are considered "hard starts"and require extra amperage at start up, and both are exacerbated by extension).
Use a heavy gauge extension cord rated for fifteen amps or more, avoid starting the compressor when it's below ten degrees, and drain the air tank after using it and you won't have a problem.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Read all my Q&A
August 18, 2015
Answer: 
Not my 15 amp. Works fine.
+4points
4out of 4found this answer helpful.
Was this helpful?helpful4unhelpful0

Asked by
Ogden, Utah
Read all my Q&A
Home Improvement Profile: Professional
August 4, 2015
Answer: 
As long as you are not running other equipment (Table saws, miter boxes etc.). I have had it for about a month and have had no problems with tripping breakers.
+4points
4out of 4found this answer helpful.
Was this helpful?helpful4unhelpful0

Asked by
Farmington Hills, MI
Read all my Q&A
July 22, 2015
Answer: 
No. Has never tripped mine.
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0

Asked by
shelton, wa
Read all my Q&A
Home Improvement Profile: DIYer
July 2, 2015
Answer: 
I've had this compressor for over 2 years and not once has it ever tripped a 15 amp breaker.
+5points
5out of 5found this answer helpful.
Was this helpful?helpful5unhelpful0

Asked by
Silver Spring, MD, USA
Read all my Q&A
June 23, 2015
Answer: 
I do not think so. We use this in our car Garage and worked fine with 15 amp circuit.
+5points
5out of 5found this answer helpful.
Was this helpful?helpful5unhelpful0
 
6 answers

with handle extended for rolling to or from,what is hieghth from ground to tip of handle

This question is from 5.2 Gal. 3.0 HP Electric Single Tank Air Compressor
Asked by
Huntington Beach
Read all my Q&A
December 26, 2012
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (6)

Asked by
Lewisville, TX
Read all my Q&A
September 4, 2014
Answer: 
I haven't measured it but its probably about 36 inches from the ground to the handle. I'm 5' 11" and the handle is about belt high. It works good for me.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Twin Falls, Idaho
Read all my Q&A
April 21, 2014
Answer: 
From the floor to the tallest portion of the handle is 37.75 inches
User submitted photo
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0

Asked by
Ohio
Read all my Q&A
March 31, 2014
Answer: 
With the handles in the upright locked position from ground to top of handle is (37 1/4").
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
Maine
Read all my Q&A
June 18, 2013
Answer: 
38 inches.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Read all my Q&A
February 12, 2013
Answer: 
It is just under 38"
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Read all my Q&A
December 28, 2012
Answer: 
The height of the MAC5200 3.0 HP Air Compressor from the base to the top of the handle is 37 1/2 inches.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
 
6 answers

Is this MAC5200 as quiet as the Makita MAC2400?

This question is from 5.2 Gal. 3.0 HP Electric Single Tank Air Compressor
Asked by
Gil
Florida
March 21, 2012
Is there a decibel specification for this unit. I am also considering the MAC2400 which is rated at 79dB which is a large selling point for my shop.
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (6)

Asked by
Ohio
Read all my Q&A
March 31, 2014
Answer: 
The MAC5200 is rated at 84dB which is oil lubricated. Compared to a oil-less 3gal. compressor that I own and is called a 'Quiet-Air' which isn't so quiet at about 92dB. I've never heard the MAC2400 but if you live near an authorized Makita service center/sales they might have both compressors there that they could fire them up for you and make a decision from there.
+7points
7out of 7found this answer helpful.
Was this helpful?helpful7unhelpful0

Asked by
Read all my Q&A
April 30, 2013
Answer: 
yes
-2points
0out of 2found this answer helpful.
Was this helpful?helpful0unhelpful2

Asked by
Read all my Q&A
November 10, 2012
Answer: 
From my experience all direct drive compressors are noisy. If you want something a little quieter go with a belt driven model. Also a larger tank would reduce how often it has to cycle.
+1point
2out of 3found this answer helpful.
Was this helpful?helpful2unhelpful1

Asked by
Read all my Q&A
October 30, 2012
Answer: 
There is no discernible difference in sound between the two. But a big difference in air volume.
+6points
6out of 6found this answer helpful.
Was this helpful?helpful6unhelpful0

Asked by
Waldo, Oh
Read all my Q&A
October 4, 2012
Answer: 
Mac2400 is a oilless compress. It runs at half the speed of the MAC5200. MA2400 you have to carry around, the MAC5200 has wheels and a handle to pull around. From most friends that have air compressors, prefer the oil. You have to do more maintence, but they will last longer. My MAC5200 is not as noisy has by neighbors pancake compress. It fills fast, only 70 secs from 0-140 lbs. The MAC5200 also has a Read More
Mac2400 is a oilless compress. It runs at half the speed of the MAC5200. MA2400 you have to carry around, the MAC5200 has wheels and a handle to pull around. From most friends that have air compressors, prefer the oil. You have to do more maintence, but they will last longer. My MAC5200 is not as noisy has by neighbors pancake compress. It fills fast, only 70 secs from 0-140 lbs. The MAC5200 also has a storage drawer and extra hoses can be hung on the handle. Read Less
-6points
9out of 24found this answer helpful.
Was this helpful?helpful9unhelpful15

Asked by
Read all my Q&A
March 22, 2012
Answer: 
The Makita MAC5200 3.0 HP Air Compressor has an induction 2-Pole motor that provides 6.5 CFM at 90 PSI with a decibel reading of approximately 84dB. The MAC2400 2.5 HP Air Compressor has an induction 4-Pole motor that provides 4.2 CFM at 90 PSI with a decibel reading of 79dB.
+7points
9out of 11found this answer helpful.
Was this helpful?helpful9unhelpful2
2 3 »
  • 2016-08-27 T16:28:58.683-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_202713486, prod, sort_default
2 3 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 79ms
  • QUESTIONS, PRODUCT

Customer Reviews

  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 43ms
  • REVIEWS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;