Rated 5.0 out of 5 by 9
Rated 5.0 out of 5.0 by Greg High quality holder
I've used a number of torsion bit holders in the past with mixed results. Normally, they just don't hold the bit in very tightly and tend to strip the heads of the screws out. Not so at all with this holder. The fitment of the bits in the holder is really tight. Plus, it's magnetized, so not only does it make sure the bits stay firmly in the holder, but also helps to hold the screws to the bit when setting them. I haven't stripped a single screw with this yet and I can really tell how well this holder transfers the power of the impact driver down to the bit itself. Just a great tool!
May 7, 2015
Rated 5.0 out of 5.0 by Nick100 Good Tool
This is a good tool. It is the same as the blue Magnetic bit holder except it is not magnetic. If you don't need the magnet to hold the screw it is your tool.
March 8, 2016
Rated 5.0 out of 5.0 by Tides As good as it gets
Like most people, I have several of these bit holders from a handful of different brands and, yet, this is the only one I need. Far and away superior to the others, most of which are big brand. Magnet is strong with absolutely zero wobble. I use with Makita's impact gold bits and can't imagine needing anything better. Exemplary products.
August 30, 2015
Rated 5.0 out of 5.0 by farmgirl95602 Just the thing for my impact driver.
I was a little disappointed that it didn't have the slide screw stabilizer, but it does hold the screwdriver tip so that it doesn't come out of the bit holder. I have dropped many a screwdriver tip into the tall weeds when it came out of the bit holder and then fell into the weeds.
The magnetic quality holds the screw on the bit holder until you have the material ready to put the screw into the material.
They do recommend that you use a Impact Gold tip because they will not be destroyed by the constant pounding of the impact driver.
November 23, 2014
Rated 5.0 out of 5.0 by medic1112 Very Durable and Great for holding bits in place
A great extension bit and holder. Its magnetic end holds the bits in place and in some cases the tip of the bit becomes magnetized and allows it to hold the screw on the end of the bit making it easy to guide smaller screws like for electronics back into the holes without having to fight the process.
March 4, 2015
Rated 5.0 out of 5.0 by texted Seems sturdy
I've had two of these come apart in the past, and I don't really know what caused it, they just gave up. This is the sturdiest, and most promising I've seen yet. It seems to be made of heavier materials that I hope will give me a much longer service life.
November 15, 2014
Rated 5.0 out of 5.0 by troy nice heavy bit holder
The only bit holder I could find that would lock into my Bosch IDH182-02 impact really heavy built bit stays locked in real well
January 18, 2015
Rated 5.0 out of 5.0 by wxray Nice features result in a good grip on the bits
This hefty little holder makes a good match with Makita's insert bits, although it will also work with any other brand.
For just a few bucks more, you get a holder with some heft. The insert end is fairly thick to add to durability. It is a little heavy, but not too much. The throat tolerance is tight, which provides a snug fit for the bits - a very good thing. You want to avoid "play."
And when you use it with matching Makita bits, you'll get a really good grip on the bits via some subtle features. The bits have small indents on them, and the holder has some raised ridges inside the throat that engage the indents. My macro focus on my camera isn't working, otherwise I'd provide a picture, so please accept my description. It is an interesting feature that really helps hold the bits. My older, cheaper holder doesn't have this.
And of course there is a magnet to also hold the bit steady.
December 3, 2013