Model # 16715

Internet #202768983

Store SO SKU #877744

Masonite 30 in. x 80 in. Smooth Flush Hardwood Hollow Core Birch Veneer Composite Interior Door Slab


30 in. x 80 in. Smooth Flush Hardwood Hollow Core Birch Veneer Composite Interior Door Slab

$111.72 /each

Choose Your Options

  • Birch

Frequently Bought Together

Product Overview

For a sleek, clean look, the Masonite Smooth Flush Hardwood Hollow Core Birch Veneer Composite Interior Door Slab offers an affordable option perfect for home and office. As part of the Masonite commitment to environmental excellence, door facings are made with by-product wood chips and constructed using premium wood veneers. To customize to your decor, doors are ready to paint, varnish or stain.

California residents: see   Proposition 65 information

  • Constructed using premium wood veneers to reveal the beauty and warmth of natural wood
  • Clean, contemporary flush doors with the beauty of natural wood grain
  • Ready to paint, stain or varnish to coordinate with your decor
  • Select designs offered in coordinating bi-fold and factory prehung single or double prehung units
  • Replacement size fits standard finished openings
  • Reversible handing allows flexibility when installing
  • Slab only hardware to install not included
  • Click here to check out our project guide on installing an interior door

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.




Warranty / Certifications

More Products With These Features


Customer Questions & Answers

are the edges finished in the birch veneer too?

Asked by: martyjimbo
Bubba's answer is the correct answer the styles are finger jointed pine in the top and bottom rails or MDF within the year is over a thin layer of particle board.
Answered by: Bob
Date published: 2015-12-30

Are the door knob assembly holes predrilled? I need the holes predrilled.

Asked by: Kent
The door is a slab door. It is not routered for the hinges or bored for the door knob and latch.
Answered by: HandyMan
Date published: 2017-02-26

can I get the door in 34" width?

Asked by: LindiB
No, this door in not manufacted in a 34" width.
Answered by: CommunityAnswer
Date published: 2016-01-24

Can these doors be trimmed and if so how much?

Asked by: Steve
The door will have a one inch stile on the sides and some to one and a half inch rail on top and's not recommended to trim more than one quarter inch off each side or three quarter inch off the bottom if you need to do more than that on the bottom it's best to hire a finish carpenter who remove the rail piece and then reglue it in the door
Answered by: Bob
Date published: 2017-04-16
  • y_2017, m_4, d_24, h_8CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_32
  • loc_, sid_202768983, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 122ms

Customer Reviews

30 in. x 80 in. Smooth Flush Hardwood Hollow Core Birch Veneer Composite Interior Door Slab is rated 3.8 out of 5 by 8.
Rated 5 out of 5 by from Just the right door for my 1970s house. Very... Just the right door for my 1970s house. Very well made and very nicely priced for this common bedroom size, 32" x 80". Cut to fit and Stain to match your other doors. Looks great!
Date published: 2017-01-24
Rated 4 out of 5 by from The door was in good shape with no major flaws when I received it. I do like the wood grain in t... The door was in good shape with no major flaws when I received it. I do like the wood grain in the veneer. In boring the hole for the door knob, I was surprised to find how small the interior wood was for holding the knob in place. There was, just barely, enough wood for the hole and support the knob. I haven't worked with a slab door for several years. In seems like the amount of wood in a hollow core door gets less and less, each year. I have the door installed and it works fine.
Date published: 2016-11-29
Rated 4 out of 5 by from The door has a nice grain.... The door has a nice grain.
Date published: 2017-04-11
Rated 4 out of 5 by from It's a Fine Enough Door I was renovating a 1960's house, all birch doors and all birch kitchen cabinets, the classic mid-century house. Some of the doors were beat up so bad they were not salvageable.1960's birch doors are not made anymore, this is it unless you make one yourself from scratch.So this is it. For the money and effort these are pretty good. The right and left edges are made out of pine so those pieces accept stain differently than the birch face. So you have to use a slight different color stain on the edges to match a stained birch face. The tops and bottom are a masonite product, which is kind of weird, because what could the cost have been to just make it out of pine like the sides. You can't see it, so, what ever. The face is made of a single peeled piece of birch so there are no seams. That would be good EXCEPT that of the 2 doors I bought, all faces had big blotches of white coloring in the grain. It took some tricky staining to get a uniform color across all the door faces. Another aspect that was troubling was the packaging on the door during shipping..there wasn't any. Not even a cheesy plastic wrap. The corners were protected by cardboard but the faces were open to possible shipping dings. Both of my doors arrived in good shape, so I thank the shippers for their care. But The door is just a veneer and if there is a large scratch on the face, there is not enough depth of birch to do too much restorative sanding. Check your door closely before accepting it. But all that said, I'd recommend it and I'm going to get more. You just have to be forewarned of possible shipping hazards and massage them more to make them look original.
Date published: 2015-10-15
Rated 5 out of 5 by from Make A Table Out Of A Door! We needed a large table to put several computers monitors on, and couldn't find what we needed that was big enough, and didn't have a lot of money to spend, so we made a table out of this slab door! We made the legs out of 4x4's and made a base for the door to sit on for support out of 2x4's so it wouldn't sag since it's hollow, and since it wouldn't be moved around much, we just glued the door to the frame with liquid nails. We painted it, and it's a table that suits our needs just fine. If you wanted a more sturdy table, you could get a solid wooden slab door.
Date published: 2013-03-01
Rated 1 out of 5 by from Cheap and poorly made This product was poorly made. I had to use wood glue to repair it before I could think of using it. Terrible coloring. Not at all like the picture.
Date published: 2014-05-07
Rated 3 out of 5 by from need more cutting space There is not hard wood te sides and top bottom. In other words you have to trim from all sides as the wasanot enough reinforcement to cut on one side.
Date published: 2015-04-14
Rated 4 out of 5 by from Good for the purpose Used for a closet door in a rental unit, Took stain well and looks good in the bedroom.
Date published: 2015-04-22
  • y_2017, m_4, d_23, h_23
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_8
  • loc_, sid_202768983, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 24ms