Model # 26FY6X6X6

Internet #202258555

Store SKU #489136

Store SO SKU #1000544805

Master Flow 6 in. x 6 in. x 6 in. 26 Gauge Flue Wye

Master Flow

6 in. x 6 in. x 6 in. 26 Gauge Flue Wye

$12.98 /each

Frequently Bought Together

Product Overview

Used to vent two appliances together where codes allow. Heavy duty construction meets most building codes for single wall use. Crimped branch pipe in the direction of airflow.

  • 26 Gauge steel construction
  • Branch allows air to flow easily
  • Crimped in the direction of airflow
  • Vent multiple appliances together

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.




Warranty / Certifications

More Products With These Features


Customer Questions & Answers

Is picture acurate? I need for top to be female, and both y and bottom to be male

Asked by: nono
The ends are as pictured, but the photo is not accurate. The Y shown is at about a 45 degree angle, but what you get is more like a 70 degree angle, hindering airflow. So, if you have measured and calculated your airflow based on the photo shown, you won't get it.
Answered by: NoThankYou
Date published: 2017-02-12
  • y_2017, m_4, d_24, h_2CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_1
  • loc_, sid_202258555, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 102ms

Customer Reviews

6 in. x 6 in. x 6 in. 26 Gauge Flue Wye is rated 3.0 out of 5 by 7.
Rated 1 out of 5 by from NOT what you see in the photo. The angle in the photo is 45, or very close, which is what I thoug... NOT what you see in the photo. The angle in the photo is 45, or very close, which is what I thought I was paying for. However, the ones I received are more like 65 to 70 degrees. Makes for inefficient air flow. AND, the crimped end won't fit inside any 6 inch non-crimped end. If I didn't need them right now I would send them back, but I'll have to spend my time and money modifying them to fit like they should. It's like Home Depot thinks people will put up with poor quality. Do they think we don't tell others when we are talking shop?
Date published: 2017-02-12
Rated 3 out of 5 by from Not optimal for dust collection but serviceable if... These were used for a dust collection system in a woodworking shop and as others have stated the branch angle on these is no where near 45 degrees. I measured it at close to 70 but if your system has enough power to overcome the extra losses, they'll work just fine after sealing the branch joint.
Date published: 2015-05-26
Rated 1 out of 5 by from well assembled but at wrong angle. I purchased 16 of these for a wood shop dust collection system. They arrived quite fast and were well assembled, but the laterial was attached at 64 degrees, not 45 degrees as advertised. This will cause an additional 1/2 " to 1 " of static pressure loss on each run. I kept these because my system could handle the additional loss. Other than the angle issue they were good quality. Master flow needs to either improve there quality control or advertise them correctly.
Date published: 2014-02-20
Rated 5 out of 5 by from Fit right in This 6 by 6 by 6 wye was just what i needed. it was used near the end of my run in my dust collection system.
Date published: 2014-10-30
Rated 1 out of 5 by from Should have paid attention to the reviews The only complaint I have with this product is that the angle is not 45 degrees as advertised but closer to 60 degrees. Another reviewer noted this, but I thought it may have just been a bad batch. I was wrong. I am going to try to make this work, but Master Flow and Home Depot should correct their product description.
Date published: 2014-04-24
Rated 5 out of 5 by from Perfect for the task I am using this for a dust collection system, so the crimping here - opposite end of the other style - is essential in maintaining proper air flow and reduced turbulence. Good gauge, nice feel of quality here.
Date published: 2014-01-28
Rated 5 out of 5 by from Good build quality Much better built than the lighter gauge version. I used this in a dust collector system for my new woodshop and it worked very well. I would order this product again.
Date published: 2013-04-24
  • y_2017, m_4, d_24, h_7
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_7
  • loc_, sid_202258555, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 21ms