Model # 633663

Internet #202091158

Store SKU #858396

Master Halco 7 ft. 6 in. Postmaster

Master Halco

7 ft. 6 in. Postmaster

  • Used with 4 ft. through 6 ft. high wood fencing
  • Installs without the use of brackets, saving time and money
  • Backed by a 15-year limited manufacturer warranty

Frequently Bought Together

Product Overview

The 7 ft. 6 in. Postmaster is used in place of wood fence posts for added strength, durability, longevity, and resistance to wind. It can be easily concealed from view to maintain the beauty of your wood fence project. It saves money since installation does not require use of brackets.

  • Galvanized steel to protect from rust and corrosion
  • Does not rot or warp like wood posts
  • Resists wind loads up to 70 mph
  • Patented design

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.




Warranty / Certifications

More Products With These Features


Customer Questions & Answers

How does this system work with corners? Is there s different post or clip to buy that allows the fence to turn?

I don't see any such options at homedepot. Anyone have a link to where the corner post components can be purchased? Thank you.
Asked by: Brian
I usually use treated posts (either 4x4, 4x6, or 6x6 depending on exposure) on the corners and where gates will be.
Answered by: AffordableDecksFences
Date published: 2017-01-31

Can these fence posts be cut?

Asked by: Michael
Instead of cutting it, I plan to sink the post to the same exact height the I plan to install the pickets at. Then, I won't have to cut the posts. I will have to have my plans finalized before starting the project.
Answered by: John
Date published: 2016-06-11

what kind of rail screw or cover screw can I use?

what kind of rail screw or cover screw can I use? HD doesn't carry the screws and corner post clip mentioned on their installation instruction. What are the alternatives? Thanks,
Asked by: Wing
I use 1-5/8" coated screws and put 3 in each side of the rail.
Answered by: AffordableDecksFences
Date published: 2017-01-31

Is the 7-1/2 post used for a 6' foot fence or a 4' fence..... I'm installing a 6' fence seeing if the post will work...

Asked by: Ryan
These posts are for 6' fences. I usually put them 18"-20" into the ground. You could build a 4' fence and just cut off the top to your desired height.
Answered by: AffordableDecksFences
Date published: 2017-02-11
  • y_2017, m_2, d_24, h_21CST
  • bvseo_bulk, prod_bvqa, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_19
  • loc_, sid_202091158, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 53ms

Customer Reviews

1/8 in. x 3-1/8 in. x 7-1/2 ft. Metal Fence Post is rated 4.6 out of 5 by 17.
Rated 5 out of 5 by from Great- Wish it was 8 ft. or 8 1/2 ft. I used these to build an all two inch by four inch fence. Used Deckmate # 8, 1 5/8 screws. Probably should have used Deckmate # 8 1-1/4 inch screws would help prevent splitting of some two by fours. I used the bottom three two by fours the ground treated lumber to save money. The treated lumber was less likely to split but more likely to bow in and out. The kiln dried two by four I used up top for all rest above bottom three treated two by fours was more likely to split but looked nicer to me. Also, make sure to put the screws on the inside so people can't steal your two by fours. I decided not to use pickets with three rails. I also did not cover the metal post with a picket the metal post looked good. I used 1 one inch by six inch up top to cover my unevenness up top my only real mistake. I used string and a level so everything else was straight and level but had some uneven ground. Probably better to use the pre punched holes and 6 inch lines on the metal post to get exact measurement of how deep to dig your post to put exactly 18 inches (1.5 ft.) in the ground to have 6 feet up top. I read you can put the rails on the outside and put 6 screws on each edge, then you can alternate the next rail up and down so you can get the next two by four up. I decided not to do this but considered it. If I used the 6 screw method I would measure about 7.5 feet between metal posts. Then you alternate up and down so don't cut treated two by fours exposing them. This was a greata alternative. It would have made the fence easier and quicker to put up if I did it 6 screw method as you would not have to worry about perfect 8 feet spacing of the two by four rails. Also you would not have to worry about the two by fours being slightly different sizes as not all 8 feet two by fours are cut exactly the same 8 ft. But I built it with 3 screws on each edge of two by four because I intended to cover the metal post with a picket but changed my mind. Check out the Halco website if you want to build a traditional wood picket fence they have instructions. Very easy to use. very sold. bend but don't break. Handled the weight fine.
Date published: 2016-09-03
Rated 4 out of 5 by from Great Product but not for everyone I chose to use these posts instead of wood posts in hopes not to replace posts in the future. I did use larger wood posts for gate openings. I set these like wood posts, dug holes and set in concrete. A few I did have to drive into the ground and the tops mushroomed. These are more expensive than the wood posts, especially when you consider filling in voids with 2x2 boards. One improvement I would ask the manufacturer would be to drill some holes on the center channel to secure 2x2's in the void. I live in an area that wasps like to build hives in voids, especially around wood fences. The height indicators every 6"s are nice for easy leveling of support boards. If you have the room in your budget, I highly recommend.
Date published: 2016-05-10
Rated 4 out of 5 by from Stagger these backwards for strongest effect! For very windy areas, rather than using these forward, as recommended, it's better to use these on the opposite side and bring the rail across both sides, and stagger down or up for the next section. That way you get SIX screws into each end of the rail. This does leave the bulge out on the back side that you can cover with two pieces. The six screws also allows sticking a fence into a corner (no post on the other end) without it sagging too much There is no stronger fence if done this way.
Date published: 2016-05-13
Rated 5 out of 5 by from Great product. Easy to install. Well made. Saves time and built to last! I try to talk all of... Great product. Easy to install. Well made. Saves time and built to last! I try to talk all of my fence customers into using these.
Date published: 2017-01-31
Rated 5 out of 5 by from Silver fence post Easy to use... exceed my expectations. Save money in long run.
Date published: 2017-02-21
Rated 5 out of 5 by from Look of wood with the strength of steel! I installed these over a year ago in big, wonderful, windy Wyoming. I've installed wood fences before using wood posts but they don't tend to handle the wind very well and they also warp or have other defects that make building straight fences that last difficult. These are very sturdy. Yep they're more expensive but I don't have to worry about the wind anymore and my fence still looks as straight and true as the day I installed it. My fence has endured multiple 60mph + windstorms with ease and looks great. The neighbors all want to know where I got these. I highly recommend these posts; they are going to last for a very long time.
Date published: 2016-02-28
Rated 5 out of 5 by from Put these is 5 years ago and they are still perfect These are a great product. Easier to lay out. Easier to mount wood rails to. Easier to set. They allow you to fill hole with more concrete because they are not bulky like 4x4s. They flex well in wind. I put the in 5 years ago at another house of mine and I'm posting this review because I am buying them again.
Date published: 2016-04-02
Rated 5 out of 5 by from Halco Metal Posts This is the best post to use for wood fences. Won't rot out like wood posts. Very slim for tight spaces. I just wish there was an 8 1/2' long post for the new code of fence heights in LA County from 6' to 7' because I have more fencing to put in.
Date published: 2015-07-19
  • y_2017, m_2, d_24, h_14
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_17
  • loc_, sid_202091158, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 59ms