0053608007193

Model 461877

Internet #100070209

Store SKU #461877

Melamine White Panel (Common: 3/4 in. x 4 ft. x 8 ft.; Actual: .750 in. x 49 in. x 97 in.)

$29.97 /each
  • Highly durable and resistant to scratches and staining.
  • Great for cabinets, closets, furniture and much more
  • Easy to maintain and clean

Frequently Bought Together

Product Overview

Melamine is particleboard laminated with a thermally fused paper/resin coating to provide a durable hard surface. Great for making cabinet carcases because it wipes clean easily. Use it, as well, for shop fixtures or to make an economical router-table top. Melamine is resistant to scratches, chemicals and staining.

California residents: see   Proposition 65 information

  • Great for making cabinet carcases. It is inexpensive too
  • Melamine is a highly durable product
  • It is easy to maintain and clean
  • Great also for cabinet liners, desk tops, furniture, closet, store fixtures etc
  • Ideal for cabinets, desk tops, closets, store fixtures, furniture and more
  • Easy to maintain and clean
  • Resistant to scratches, chemicals and staining
  • Special order colors are available on a regional basis. Contact the home depot prodesk for specific colors and locations
  • Note: Product may vary by store.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

51 Questions43 Answers

Customer Questions & Answers

Melamine White Panel (Common: 3/4 in. x 4 ft. x 8 ft.; Actual: .750 in. x 49 in. x 97 in.)
Melamine White Panel (Common: 3/4 in. x 4 ft. x 8 ft.; Actual: .750 in. x 49 in. x 97 in.)

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
 
3 answers

How to finish edges

This question is from Melamine White Panel (Common: 3/4 in. x 4 ft. x 8 ft.; Actual: .750 in. x 49 in. x 97 in.)
Asked by
Thousand Oaks
Read all my Q&A
August 26, 2015
I am thinking of using this material as the shelving in a walk in pantry. How do you finish the edges so that the raw sides are not showing.
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (3)

Asked by
Tucson AZ
Read all my Q&A
December 11, 2015
Answer: 
I found a great "alternative" for the edge banding that is perfect in some applications: Use the textured faux stone finish. (I use a grey) In some of my applications I 1/4 round the edges and lightly sand then spray this on the edges and top it off with a clear spray on urethane that seems to lock it in. It REALLY holds well due to the very open particleboard substrate.
+5points
5out of 5found this answer helpful.
Was this helpful?helpful5unhelpful0

Asked by
Pike, KY
Read all my Q&A
September 19, 2015
Answer: 
Home Depot sells rolls of iron-on laminate.
+3points
3out of 3found this answer helpful.
Was this helpful?helpful3unhelpful0

August 27, 2015
Answer: 
Hi Jill,
You can purchase edge banding in the store or online.
I have included the link below.
http://www.homedepot.com/p/Unbranded-13-16-in-x-250-ft-White-Melamine-Edgebanding-with-Hot-Melt-Adhesive-03white/204217201
Mike
+13points
13out of 13found this answer helpful.
Was this helpful?helpful13unhelpful0
 
2 answers

what kind of laminate is on top of the particle board

This question is from Melamine White Panel (Common: 3/4 in. x 4 ft. x 8 ft.; Actual: .750 in. x 49 in. x 97 in.)
Asked by
michigan
Read all my Q&A
May 23, 2016
is the laminate on top of board sold separately
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
Read all my Q&A
July 4, 2016
Answer: 
The laminate is actually called melamine. It's essentially a paper sheet impregnated with resin under heat and pressure. In this case it is bonded directly to the particle board substrate. You can by a phenolic resin sheet of similar but thicker stuff. The brand name you're most likely to see is Formica in with the counter tops. If you are looking for even tougher, thicker material you could try looking Read More
The laminate is actually called melamine. It's essentially a paper sheet impregnated with resin under heat and pressure. In this case it is bonded directly to the particle board substrate. You can by a phenolic resin sheet of similar but thicker stuff. The brand name you're most likely to see is Formica in with the counter tops. If you are looking for even tougher, thicker material you could try looking for phenolic sheets from a plastic supplier. That stuff is dense, heavy, and costs significantly more. Read Less
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0

Asked by
Severna Park
Read all my Q&A
May 24, 2016
Answer: 
Well, it's really not a laminate, it's called Melamine and it's a plastic or Formica. It is heat bonded to the particle board so it is not sold separately, it's always one piece.
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0
 
2 answers

Custom cuts in-store?

This question is from Melamine White Panel (Common: 3/4 in. x 4 ft. x 8 ft.; Actual: .750 in. x 49 in. x 97 in.)
Asked by
Whitestone,NY
Read all my Q&A
November 12, 2015
Can I get this cut to size in- store? Need 3 cuts
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
Severna Park
Read all my Q&A
November 12, 2015
Answer: 
Yes, every Home Depot has a designated station that will cut any sheet-goods for you at no charge.
+6points
6out of 6found this answer helpful.
Was this helpful?helpful6unhelpful0

Asked by
Pike, KY
Read all my Q&A
November 12, 2015
Answer: 
Usually that is up to the particular store. They usually have a 4 x 8 ft panel saw in the store and can make straight cuts and they may charge for each cut. Don't always count on those cuts to be really accurate. They do what they can, but the level of accuracy is dependent on the experience of the store saw operator, current accuracy settings of the saw at the time as well as the dullness/sharpness of Read More
Usually that is up to the particular store. They usually have a 4 x 8 ft panel saw in the store and can make straight cuts and they may charge for each cut. Don't always count on those cuts to be really accurate. They do what they can, but the level of accuracy is dependent on the experience of the store saw operator, current accuracy settings of the saw at the time as well as the dullness/sharpness of the blade. Read Less
+8points
9out of 10found this answer helpful.
Was this helpful?helpful9unhelpful1
 
1 answer

needing a melamine board to make a concret counter top an it need to be at least 10 feet long an 4 feet wide can i order it form here

This question is from Melamine White Panel (Common: 3/4 in. x 4 ft. x 8 ft.; Actual: .750 in. x 49 in. x 97 in.)
Asked by
ohio
Read all my Q&A
August 9, 2016
if I cant where can I
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

Asked by
Severna Park
Read all my Q&A
August 10, 2016
Answer: 
No store is going to have anything bigger than 8'. You could special order it from a supplier, but it would be outrageously expensive I am sure. So yeah, 8' is the standard size.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
2 3 4 »
  • 2016-08-29 T14:07:00.763-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_100070209, prod, sort_default
2 3 4 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 64ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 4.8 out of 5 by 8 reviewers.
Rated 4.0 out of 5.0 by This melamine is not 3/4" thick I bought this product seeing that the online specifications show that it is 3/4" thick. I designed my project for 3/4" thick dadoes throughout. The boards I cut COULD NOT be driven into a 49/64" slot. (allowing 1/64" for fit-up) Now I have to go back and change all my drawing measurements to 25/32" because the panels are just a tad thicker than specified. Either this product is not milled to specs or Home Depot needs to change the measurements in it's description. FOI: The edges were not swelled. I measured the thickness from a center cut. July 11, 2014
Rated 4.0 out of 5.0 by painting melamine painting melamine is not advisable.it has a very, very slick surface. October 21, 2014
Rated 5.0 out of 5.0 by Did the job! Needing a large panel to front a white garage work desk, I bought this 4x8 knowing there would be plenty left over. But I've found several ways to constructively use up the pieces, shelves etc. Good stuff. August 26, 2014
Rated 5.0 out of 5.0 by great stuff I build reptile enclosures for a living and this is all I use because it is so easy to wipe down if something is spilled on it or an animal goes to the bathroom the only downside to this is that you must predrill all the holes which can be time consuming but it makes a enclosure look great June 1, 2014
Rated 5.0 out of 5.0 by Excellent materiel I have used this mel board for decades both black and white to make cabinets, desks, office counters, computer work centers, and shelving. I even used it in my kitchen as a temporary sink counter for four years until I could replace it with the real thing. It held up very well for being in a wet place but I don't recommend it for that. The desks and counters I made for commercial offices were heavily used and lasted for 15+ years until the warehouse was totally rebuilt. You can edge it with white edging tape or use solid hardwoods. You can also use vinyl Tee molding (commonly called "slap" molding. It is best cut, in my opinion, with 1/4" carbide tipped router bits. I am currently making a sewing room for my wife and I will use this materiel for a sturdy sewing table, extensions, and work area. August 23, 2010
Rated 5.0 out of 5.0 by DIYDOOD I bought 1 and had staff cut for me (free) I made counter top,,2 sides for a dishwasher ,,and (2)1x5 foot shelves easy to work with,beutiful results ,,and looks pro(: June 3, 2014
Rated 5.0 out of 5.0 by It is melamine It's melamine. It was white and in fine condition. I ordered 16 sheets via Web which was nice. The order was ready for the next day all bundled. Guys loaded it on my trailer as well. Used for cabinets April 15, 2014
Rated 5.0 out of 5.0 by This pannel was fantastic I bought it to make shelves and it was exactly what I was looking for May 20, 2014
  • 2016-08-29 T14:23:25.071-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_8, tr_8
  • loc_en_US, sid_100070209, prod, sort_default
1-8 of 8
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 36ms
  • REVIEWS, PRODUCT