Model # 1605508

Internet #202088834

Store SKU #371662

null Melamine White Shelf Drilled Board (Common: 3/4 in. x 11-3/4 in. x 8 ft.; Actual: 0.75 in. x 11.75 in. x 97 in.)
0099167678467

Melamine White Shelf Drilled Board (Common: 3/4 in. x 11-3/4 in. x 8 ft.; Actual: 0.75 in. x 11.75 in. x 97 in.)

$19.96 /each

Frequently Bought Together

Product Overview

Shelving is a quick, easy, and affordable way to get organized! Melamine shelving is perfect or utility purposes, while decorative melamine adds the same functionality with the look that complements your decor for closets, work rooms, and pantry areas. This 3/4 in. x 11-3/4 in. x 8 ft. Particleboard Melamine Shelf features a smooth-textured surface and drilled holes. The shelf has a KDHT moisture content rating.

  • Manufactured from particleboard/composite
  • Smooth surface
  • Pre-drilled holes
  • Kdht moisture content

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

On the drilled holes on this product, do they go all the way through? (i.e. can I hang shelves on both sides?)

Asked by: AlaskaTrent
No. However, you can drill the holes through with a 5mm twist drill bit. If you decide to do this use some kind of wood backing, pressing the two firmly together, to avoid chipping the particle board on the exit side of the hole.
Answered by: Stimi
Date published: 2017-01-08

are the side edges finished in white

Asked by: JWH
Only one edge.
Answered by: Stimi
Date published: 2016-12-22

How big are the holes? I'm trying to purchase shelf supports. The ones I purchased are too small for the holes

Asked by: Eve
5mm. Shelf support pins typically come in one of two diameters, 1/4 inch and 5mm.
Answered by: Stimi
Date published: 2017-01-08

How do you connect the side board to the top shelf board? I want to create a rectangle box with panels on sides, top, and bottom.

Asked by: AI
Screw and glue. For melamine you must use hide glue - typical wood glues won't adhere. There are lots of techniques for building the basic box using various joinery techniques or assemble-it-yourself-furniture style hardware (think IKEA), but the simplest and fastest way to get to a basically stable box is to pre-drill 4-5 evenly spaced holes 3/8 inch in from the top and bottom edges for attaching the top and bottom panels. Use #8 1 5/8 or 2 inch flat head wood screws. Use good quality wood screws (GRK or similar) with a cut, self drilling point and flutes under the screw head for self counter sinking. IMPORTANT - particle board chips and cracks easily so make sure your screws are centered on the shelves (3/8 inch is half of 3/4 inch - the shelf thickness) and don't overdrive the screws. Finally, and this is important for lateral stability, I'd suggest adding a panel to the back using 1/8 inch thick melamine faced pressboard. Cut the pressboard to slightly less than the overall dimensions of the box and nail or screw it to the back. If you don't want to completely enclose the back then cut two narrow pieces, one for the top and one for bottom and attach with screws or nails.
Answered by: Stimi
Date published: 2017-02-20
  • y_2017, m_2, d_23, h_5CST
  • bvseo_bulk, prod_bvqa, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_9
  • loc_, sid_202088834, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 88ms
  • QUESTIONS, PRODUCT

Customer Reviews

Melamine White Shelf Drilled Board (Common: 3/4 in. x 11-3/4 in. x 8 ft.; Actual: 0.75 in. x 11.75 in. x 97 in.) is rated 1.5 out of 5 by 4.
Rated 1 out of 5 by from I bought two pre-drilled panels to use as shelf support panels and one panel without the holes to... I bought two pre-drilled panels to use as shelf support panels and one panel without the holes to cut into shelves. To my surprise, the pre-drilled panels are not symmetrical top to bottom - meaning you can't use two panels facing inward because the distance from the bottom/top of the panel to the first set of holes is different. Moreover, the edge banding is only on one edge, which means you have to flip one panel to get two panels with inward facing holes. For this to work the panels have to be symmetrical. It appears that these panels are manufactured in left/right configurations and HD only stocks one side. And finally, as if that weren't enough, the ends were not cut square. Frustrating, to say the least. Fortunately, I'm a reasonably competent wood worker with a full wood shop in my basement so squaring off the ends and cutting the boards to make them symmetrical was, while annoying, not a big deal. Once I cut them to be symmetrical and squared up the ends, I routed dadoes and rabbits into the side panels, top, bottom and middle to build a shoe rack that fit inside a utility closet. My wife loves it. And her dog is no longer able to chew the little plastic things off the ends of our shoelaces. Success! The reason I can't recommend this product for the average DIY buyer is precisely because I had to do the above - I have to assume the average buyer doesn't have the facilities I have at their disposal. I EXPECTED a product that would allow me to quickly and efficiently assemble the basic frame for a set of shelves. Instead I ended up with a product that required truing before I could use it. Given the price of the panels and the hassle factor associated with preparing the panels for use, I can't recommend the product.
Date published: 2016-11-25
Rated 3 out of 5 by from Good deal but not the highest quality Purchased two panels to redo a child's closet. Once things were caulked, it looked much nicer. However initial installation looked a bit rough. The board chips very easily when you cut it so make sure you tape the seams before you cut. The panels are not painted in the picture. I did not think it was necessary. Did not have any issues with the alignment of the holes. Since the holes are not drilled all the way through, it worked for me to use it as a middle divider between shelving and hanging areas.
Date published: 2016-07-15
Rated 1 out of 5 by from Check Hole Pattern Before Purchase I purchased this product to make a shelf in my kitchen where I could adjust the shelves. I got this home and cut ir to size only to find that the peg holes did not line up horizontally!!! They were at least 1/4 inches off from each other. I took it back and to Home Depots credit they refunded my money. I still need the shelf so I went to get another one. This time I went with my T-square. To my amazement, EVERY single shelf in stock, had hole patterns that did not line up!!! That is very poor craftsmanship. If you are going to purchase this item, take a T-square with you. It will save you a lot of time and grief.
Date published: 2015-07-11
Rated 1 out of 5 by from Not white These are not white. They are dingy off white.You will have to paint them if you want white shelves.
Date published: 2015-12-03
  • y_2017, m_2, d_23, h_12
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_4
  • loc_, sid_202088834, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 166ms
  • REVIEWS, PRODUCT