0745932305235

Metal Sales

Model # 2313349

Internet # 204255013

10 ft. Classic Rib Steel Roof Panel in Burnished Slate

$29.98 /each
Color Family: Brown
  • Beige
  • Blue
  • Brown
  • Gray
  • Red
  • White

FREQUENTLY BOUGHT TOGETHER

PRODUCT OVERVIEW

Model # 2313349

Internet # 204255013

Built for beauty, durability and value, the Metal Sales Classic Rib is a hard-working roof panel that performs in all seasons. Ideal for a variety of structures including pole barns, equipment storage, stables, garages, sheds and houses, this lightweight metal panel is easy to install to protect your investment beautifully and affordably. Classic Rib has a low profile rib height of ¾” and is designed for attachment to the roof substrate with fasteners that penetrate the face of the panel. Fastener heads are exposed to view and feature a gasket that prevents leaking. Classic Rib comes standard with MS Colorfast45, a superior four-layer coating system that has undergone rigorous real-world weathering tests to prove its long-term ability to stand up to the elements. All 7 color options are listed with ENERGY STAR and improve energy efficiency by reflecting sunlight before it can be absorbed as heat. This reduces the amount of energy needed for cooling your building. Classic Rib also provides you with decades of worry-free service with low maintenance requirements.

  • 29 gauge thickness, 36 in. panel coverage and ¾ in. rib height; features bell top trapezoidal rib on 9 in. centers.
  • Designed to be installed on roofs with a 3:12 or greater slope over open framing or solid substrate
  • MS Colorfast45 coating system guards against corrosion, fading, chalking and chipping.
  • Carries a 45-Year finish warranty for durability and aesthetics
  • Withstands severe weather conditions including high winds and fire – advantages that may lower insurance premiums
  • Environmentally responsible choice containing a minimum 30% recycled content and is 100% recyclable
  • Virtually maintenance free and resistant to mildew, rot and pests. Occasional cleaning will maintain its appearance
  • Product available to ship to local The Home Depot Store, not available for residential or jobsite delivery
  • For help with your project please refer to our Pre-Installation and Installation videos located next to product images above.

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

SPECIFICATIONS

Dimensions
Approximate Length (ft.) 
10 
Coverage Area (sq. ft.) 
30 
Product Depth (in.) 
120 
Product Height (in.) 
0.75 
Product Length (in.) 
120 
Product Width (in.) 
36 
Details
Color Family 
Brown 
Commercial / Residential 
Commercial / Residential 
Material 
Steel 
Product Weight (lb.) 
22 lb 
Profile 
Metal Sheets 
Returnable 
90-Day 
Roofing Product Type 
Panel 
Warranty / Certifications
Manufacturer Warranty 
45 Year Finish Warranty 

MORE PRODUCTS WITH THESE FEATURES

Color Family: Brown
Material: Steel
Approximate Length (ft.): 10
Price: $20 - $30
Brand: Metal Sales
Review Rating: 4 & Up
Search
31 Questions40 Answers

Customer Questions & Answers

10 ft. Classic Rib Steel Roof Panel in Burnished Slate
10 ft. Classic Rib Steel Roof Panel in Burnished Slate

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
 
2 answers

The sheets are 36 in wide. And require overlaping. Please see below

This question is from 10 ft. Classic Rib Steel Roof Panel in Red
Asked by
Charleston sc
Read all my Q&A
May 21, 2016
Will 4 sheets cover a 12 ft wide roof end rafter to end rafter or do you loose coverage due to overlapping sheets. Do I measure center to center from end of first sheet.
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
Great Falls, MT
Read all my Q&A
Home Improvement Profile: DIYer
May 23, 2016
Answer: 
Hello Scapes, you are correct. You will loose approx 3-4 inches within those 4 sheets. This is why they have Gable Trim Available. I have included pictures & a link for you. I hope this helped.
Link: http://www.homedepot.com/p/Metal-Sales-Gable-Trim-in-Red-4206024/204256731
User submitted photo
User submitted photo
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Great Falls, MT
Read all my Q&A
Home Improvement Profile: DIYer
May 23, 2016
Answer: 
Hello Scapes, you are correct. You will loose about 3-4 inches in overlap within those 4 sheets - However that is why they have the Gable Trim available. I have included links & Pictures for reference. I hope this helped.
Link: http://www.homedepot.com/p/Metal-Sales-Gable-Trim-in-Red-4206024/204256731
User submitted photo
User submitted photo
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
0 answers

How wide with OVERLAP?

This question is from 10 ft. Classic Rib Steel Roof Panel in Charcoal
Asked by
Read all my Q&A
May 18, 2016
I can understand that these panels are 36" wide per the description. How much width do you lose when you overlap them, though? They overlap next to each other, no?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0
 
1 answer

What if the pitch is less than 3:12?

This question is from 10 ft. Classic Rib Steel Roof Panel in White
Asked by
Read all my Q&A
May 18, 2016
We're using this on a chicken coop which only has a pitch of 1.3:12. It's a ten-inch rise over an eight-foot run.

Thanks!
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

Asked by
Great Falls, MT
Read all my Q&A
Home Improvement Profile: DIYer
May 19, 2016
Answer: 
Hello Herb, I believe for a Chicken Coop this would be fine as long as the run has a stable frame structure to support the panels properly. I would however seal the edges of roof panel with edge tape & of course use roof washer screws too. Screws come in matching colors also. I did provide links below. I hope this Helped.
Link : Read More
Hello Herb, I believe for a Chicken Coop this would be fine as long as the run has a stable frame structure to support the panels properly. I would however seal the edges of roof panel with edge tape & of course use roof washer screws too. Screws come in matching colors also. I did provide links below. I hope this Helped.
Link : http://www.homedepot.com/p/Metal-Sales-50-ft-Single-Bead-Tape-Sealant-6404099/204289091
Link: http://www.homedepot.com/p/Metal-Sales-1-1-2-in-Galvalume-Wood-Screw-250-Bag-8211200/204741605 Read Less
User submitted photo
User submitted photo
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
1 answer

What to use for flashing with metal roof panels?

This question is from 10 ft. Classic Rib Steel Roof Panel in Burnished Slate
Asked by
Richmond
Read all my Q&A
March 21, 2016
I'm using these panels for a lien-tu on the back of a shed. I don't see any flashing offered in matching colors. The vendor shows valley pieces and other transitions but not on the HD site.
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

Asked by
Read all my Q&A
May 20, 2016
Answer: 
RVADIY, thank you for your recent inquiry with The Home Depot. The flashing and other finishing items are on the Home Depot web page for this item, located just below the item. We appreciate your business and look forward to serving you in the future. Thank you for shopping Home Depot.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
2 3 »
  • 2016-05-31 T11:34:52.424-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_204255013, prod, sort_default
2 3 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 390ms
  • QUESTIONS, PRODUCT

CUSTOMER REVIEWS

Rated 4.7 out of 5 by 26 reviewers.
Rated 4.0 out of 5.0 by No complaints! Installed on flat top pergola. Installed with no problem. May 26, 2016
Rated 5.0 out of 5.0 by Rib Steel Roof Heavy metal steel roof is excellent. Easy to install December 30, 2014
Rated 5.0 out of 5.0 by Beautiful Beautiful brown color. Very sturdy, surprisingly so! November 11, 2014
Rated 5.0 out of 5.0 by Easy to Install The product was easy to put up and looks good as new. Would recommend this to anyone adding an exterior structure to there home. I love my new roof and can sit outside in the rain now! March 31, 2015
Rated 4.0 out of 5.0 by decent quality Product was eay to install. Not as sturdy as i was expecting. worked well fro an outdoor shed. color is sharp. Hoping both sides painted brown. October 21, 2014
Rated 5.0 out of 5.0 by Great Product! This was very quality product! Easy to install and great value. September 16, 2014
Rated 4.0 out of 5.0 by Satisfied with Product 8 Sheets of Rib Steel Roof Panels picked up at store well packaged and in excellent shape. Very happy with the product which went on well. Would have liked to have had a fastening schedule with the purchase. See partially completed project photo September 11, 2014
Rated 5.0 out of 5.0 by As described and easy to work with Just buying one sheet I was worried it would arrived twisted and bent but it was perfect. It was easy to cut with tin-snips and made a great roof for a chicken coop. It seems like it should last many years. June 3, 2014
  • 2016-05-31 T12:05:23.184-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_26, tr_26
  • loc_en_US, sid_204255013, prod, sort_default
2 >>
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 87ms
  • REVIEWS, PRODUCT