0745932304825

Metal Sales

Model 2313241

Internet #204289023

8 ft. Classic Rib Steel Roof Panel in Galvalume

$21.98 /each

Frequently Bought Together

Product Overview

Built for beauty, durability and value, Metal Sales Classic Rib is a hard-working roof panel that performs in all seasons. Ideal for a variety of structures including pole barns, equipment storage, stables, garages, sheds and houses, this lightweight metal panel is easy to install and protects your investment beautifully and affordably. Classic Rib has a low profile rib height of 3/4 in. and is designed for attachment to the roof substrate with fasteners that penetrate the face of the panel. Fastener heads feature a gasket that prevents leaking. Classic Rib also provides you with decades of worry-free service with low maintenance requirements.

  • 29 gauge thickness, 36 in. panel coverage and ¾ in. rib height; features bell top trapezoidal rib on 9 in. centers.
  • Galvalume finish is unpainted for a natural metal appearance and carries a 25-year material warranty for durability
  • Withstands severe weather conditions including high winds and fire, advantages that may lower insurance premiums
  • Environmentally responsible choice containing a minimum 30% recycled content and is 100% recyclable
  • Virtually maintenance free and resistant to mildew, rot and pests; occasional cleaning will maintain its appearance
  • Product available to ship to local The Home Depot Store, not available for residential or jobsite delivery
  • For help with your project please refer to our Pre-Installation and Installation videos located next to product images above.

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

9 Questions8 Answers

Customer Questions & Answers

8 ft. Classic Rib Steel Roof Panel in Galvalume
8 ft. Classic Rib Steel Roof Panel in Galvalume

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
This question is from 8 ft. Classic Rib Steel Roof Panel in Galvalume
 
3 answers

what gauge metal is the panel 3/4 hight is the corigation hight but no metal gauge listed from what i can see

This question is from 8 ft. Classic Rib Steel Roof Panel in Galvalume
Asked by
mass
Read all my Q&A
September 9, 2015
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (3)

Asked by
NE Ohio
Read all my Q&A
Home Improvement Profile: DIYer
November 7, 2015
Answer: 
It says it's 29 gauge in the specs.
+3points
3out of 3found this answer helpful.
Was this helpful?helpful3unhelpful0

Asked by
San Antonio, Tx.
Read all my Q&A
Home Improvement Profile: Other
October 2, 2015
Answer: 
yes it is 29 gauge
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
Read all my Q&A
September 29, 2015
Answer: 
It is 29 gauge, I believe. Might be 26, but I think 29.
-1point
0out of 1found this answer helpful.
Was this helpful?helpful0unhelpful1
This question is from 8 ft. Classic Rib Steel Roof Panel in Galvalume
 
2 answers

Can one purchase rolls of corrugated metal for a long stretch?

This question is from 8 ft. Classic Rib Steel Roof Panel in Galvalume
Asked by
Sacramento, CA
Read all my Q&A
October 7, 2015
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
NE Ohio
Read all my Q&A
Home Improvement Profile: DIYer
November 7, 2015
Answer: 
Corrugated metal can't be rolled, but a portable roller system is made that guys will take on a job and corrugate the metal cut from a roll.
Some lumber yards can custom order panels in longer lengths. I ordered 21 foot long sheets for my roof from the local lumber yard so I didn't have a seam in the roof.
+5points
5out of 5found this answer helpful.
Was this helpful?helpful5unhelpful0

October 19, 2015
Answer: 
Thank you for your recent inquiry with The Home Depot, CBS. We do not carry corrugated metal in longer rolls, only in panel form. We appreciate your business and look forward to serving you in the future. Thank you for shopping Home Depot.
0points
2out of 4found this answer helpful.
Was this helpful?helpful2unhelpful2
This question is from 8 ft. Classic Rib Steel Roof Panel in Galvalume
 
2 answers

what is used to attach panels

This question is from 8 ft. Classic Rib Steel Roof Panel in Galvalume
Asked by
texas
Read all my Q&A
September 21, 2015
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
NE Ohio
Read all my Q&A
Home Improvement Profile: DIYer
November 7, 2015
Answer: 
Screws with a rubber seal.
+3points
3out of 3found this answer helpful.
Was this helpful?helpful3unhelpful0

Asked by
Read all my Q&A
September 29, 2015
Answer: 
You will want to use coated screws to attach the panels, such as:
http://www.homedepot.com/p/Teks-12-x-1-in-Hex-Washer-Head-Drill-Point-Roofing-Screw-80-Pack-21412/100187594
You should be attaching into 1x4 or 1x6 nailers that are attached to and lay across the roof joists at a distance of about 24" from each other. You will need at least 2 screws per every 2 linear foot of roof panel (one each side, Read More
You will want to use coated screws to attach the panels, such as:
http://www.homedepot.com/p/Teks-12-x-1-in-Hex-Washer-Head-Drill-Point-Roofing-Screw-80-Pack-21412/100187594
You should be attaching into 1x4 or 1x6 nailers that are attached to and lay across the roof joists at a distance of about 24" from each other. You will need at least 2 screws per every 2 linear foot of roof panel (one each side, every 2 feet on the metal panel) plus 2 screws per panel (18 for each 16 foot panel). Read Less
+15points
15out of 15found this answer helpful.
Was this helpful?helpful15unhelpful0
This question is from 8 ft. Classic Rib Steel Roof Panel in Galvalume
 
1 answer

what is the span rating

This question is from 8 ft. Classic Rib Steel Roof Panel in Galvalume
Asked by
pa
Read all my Q&A
October 9, 2015
how many supports are needed for a 16' X 3' panel. what to cover a car port. putting them on a 12' X16' roof
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

Asked by
NE Ohio
Read all my Q&A
Home Improvement Profile: DIYer
November 7, 2015
Answer: 
Typically it is screwed to a 2x4 24" on center, and is sturdy enough to walk on safely.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
2 »
  • 2016-09-08 T13:09:41.764-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_204289023, prod, sort_default
2 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 38ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 4.8 out of 5 by 8 reviewers.
Rated 5.0 out of 5.0 by perfect for the job! This metal siding made a perfect roof for my storage shed. I used self drilling screws with rubber washers to fasten it to the metal stud framing. No maintenance and very unlikely to leak. August 23, 2016
Rated 5.0 out of 5.0 by First rate material Material was flawless. Nice weight. No visible flaws or cosmetic problems. May 17, 2016
Rated 5.0 out of 5.0 by Satisfied The sheet metal was exactly what I needed for my project. March 22, 2016
Rated 5.0 out of 5.0 by Came in excellent condition and was extremely pleased. Easy to remove packing material. Bought the roofing material to cover inside of horses barn because my mare was eating the 3/4" paneling that was inside. Made excellent siding and prohibits her from chewing anymore holes... May 12, 2015
Rated 5.0 out of 5.0 by Great Quality! BEST PRICE OUT THERE! My parents had an existing aluminum patio cover at a 4 family house. The steel frame was in good shape but the aluminum roof was in bad shape it was over 40 years old. I shopped for roof material but I did not like the plastic or composit roofs . I was told some only lasted 5 years before cracking. 5 years? So I went with this and couldnt be happier. The quality is (TOP RATE) easy to cut I used snips and a jigsaw you may even cut using a sawzall with steady hands. I bolted roof to existing metal frame with Tek#12 screws with gasket washers they are very good . Homedepot delivered to store as scheduled no shipping charge! This is easily one of the best deals out their a metal roof as cheap as plastic or composit this was a no-brainer! June 25, 2014
Rated 3.0 out of 5.0 by Works great but way too expensive. OK if you're rich or have a job. Not so good if you're on Social Security trying to fix a leak in the roof. I found the material a little too flexible. Not recommended for instillation over uneven roofing like older farmhouses without using perlins or new wood to attach it to. Very difficult to cut hole for clearing vent pipes due to the thinness and flexibility but then maybe I don't have professional snipping tools - just a saber saw. Good luck with this - it looks great when finished correctly. September 16, 2014
Rated 5.0 out of 5.0 by Easy to install; good support in store. Arrived in store as scheduled. Staff helped choose fasteners. Even two pros at cashier's chimed in with tips. Us two inexperienced seniors had no problems with installation. Used our ryobi cordless drill, bought from homedepot years ago. Thanks HD for support throughput the project: deck then roof and screening next. April 8, 2014
Rated 5.0 out of 5.0 by Roof Panels There's not much to say, I needed roof panels to match an existing roof, and Home Depot had what I needed. l bought them, installed them and they work fine. End of story. July 8, 2014
  • 2016-09-08 T14:29:27.605-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_8, tr_8
  • loc_en_US, sid_204289023, prod, sort_default
1-8 of 8
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 32ms
  • REVIEWS, PRODUCT