Model # 6451799

Internet #204289085

Metal Sales Classic Rib Inside Closure Glued
0745932786591

Metal Sales

Classic Rib Inside Closure Glued

  • Protects from outside elements, bugs and insects
  • Easily cut to length
  • Dense, polyethylene closure
Was  $1.73
$130 /each

Save 25%  through 06/28/2017

Frequently Bought Together

Product Overview

Inside Closure is a polyethylene closure designed to be used at roof and wall edges. Dense material keeps insects out. The gray foam closure can easily be cut to length if needed. Helps keep the building closed off from outside elements.

  • 1 in. x 1.5 in. x 36 in. pieces
  • Dark gray color to blend into the shadows of the panel
  • Glue strip to adhere to panel and trim
  • Keeps bugs and insects out of your building
  • Product available to ship to local The Home Depot Store, not available for residential or jobsite delivery.

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

put on after or during install of the roof

Asked by: red
I've learned the best way to install these enclosures at the eave end of roof. When installing metal sheets fasten all sheets using appropriate spacing for rows of attachment screws. However, do not install final row of screws at the eave end of the roof (depending on how many rows are chosen the last 2 may need to be foregone to accommodate room for enclosure installation) When roof is installed as stated previously, the eave end of the panels will be slightly movable (wiggle room or temporary ), enough so that the foam enclosures can be carefully slid underneath the panels and into place. With the pressure that results from installing the bottom row (or rows) of screws when the foam enclosures are in place the adhesive strip on the bottom is not really required. But a dab of glue applied to the rib tips is an extra piece of mind in the rare case the enclosures want to shift with severe weather conditions. This method was used for a straight run of 36' (12 panels) on a low pitched roof.
Answered by: Sunburn
Date published: 2017-05-15

Will air pass through this material ?

Will air pass through this material to help allow attic space ventilation?
Asked by: Dave
it is a foam material, but a denser foam. I would say air will not pass.
Answered by: RickB
Date published: 2016-10-11

What are size specs?

Will this fit a steel 36" "PBR" panel. Is it self-sticking? Is it stocked in the stores?
Asked by: JCB2
No its for classic rib. Yes it is self sticking.
Answered by: Bigriver
Date published: 2016-02-17

how far apart are the ribs??

Asked by: amature
9 inch spacing for classic rib siding.
Answered by: Bigriver
Date published: 2016-09-19
  • y_2017, m_6, d_26, h_23CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_8
  • loc_, sid_204289085, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 33ms
  • QUESTIONS, PRODUCT

Customer Reviews

Classic Rib Inside Closure Glued is rated 3.1 out of 5 by 10.
Rated 2 out of 5 by from I placed wood underneath and screwed in. Much better results... I placed wood underneath and screwed in. Much better results
Date published: 2017-03-14
Rated 5 out of 5 by from perfect way to close up the ends....fit great. perfect way to close up the ends....fit great.
Date published: 2017-05-16
Rated 2 out of 5 by from Met expectations Met expectations
Date published: 2017-01-03
Rated 3 out of 5 by from Used for interior metal siding in work shop. The closure material has the glue on the wall side. That is fine you can get it stuck on the building in the right position to match the ribs. Would be much easier if the closure material was configured such that you could glue it to the metal siding before the siding is installed. That's why I gave it 3 stars.
Date published: 2016-02-16
Rated 1 out of 5 by from Get it somewhere else No glue on the ends. Melted to bottom of box, customer service thought it was funny, Customer service is horrible.
Date published: 2016-08-03
Rated 3 out of 5 by from This product is OK if you follow the recommendation to use double side tape and secure it to the ... This product is OK if you follow the recommendation to use double side tape and secure it to the panel and then place it and the panel in the desired location. However, this still leaves the issue of interlocking the ends of the strips. The strip's adhesive is extremely sticky, once touched down it can not be pulled back up without breaking the closure strip. I tried to place the strip where intended and then place the panel on top; it was a real challenge to get the correct spacing of the closure strip ridges at the exact locations to match the panel ribs. I did all the roofing panel installation by my self; I believe it would take two people to properly place the panels if the closure strip was adhered to the panel first. Like I said once the closure strip glue touches something, its very difficult to shift or pull up and move. Maybe the answer is to make up a gauge jig to enable making prefect spacing of the ribs when sticking the closure strip in place, that is, don't tape them to the panels. This approach would allow one to keep placing two strips down prior to placing each panel. I believe this is necessary to properly interlock the ends of the strips; difficult to do once the panel is placed. Bottom line, I learned a few things about installation that I would apply on the next roofing project, if I have one.
Date published: 2016-12-09
Rated 2 out of 5 by from Glue on Wrong side Complete agree with the reviewer who said the glue was on the wrong side. It would have worked so much better to glue it to the metal panel and then position the metal panel correctly. It is very hard to put metal roofing on a steep roof, by yourself, to began with. After fiddling with this, trying to line them up correctly so the my next metal panel fit properly, I decided they were worth the extra difficulty and increase in life threatening falls. They are in the garbage!
Date published: 2016-10-16
Rated 3 out of 5 by from Not so good This ribs did not match with the panel groves exactly. I had to cut about 1 inch piece regularly to fit in to the groves in the panel
Date published: 2016-10-11
  • y_2017, m_6, d_27, h_6
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_10
  • loc_, sid_204289085, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 53ms
  • REVIEWS, PRODUCT