Model # PF9360

Internet #202034710

Store SO SKU #910458

Millstead Oak Bordeaux 3/8 in. Thick x 4-1/4 in. Wide x Random Length Engineered Click Wood Flooring (20 sq. ft. / case)


Oak Bordeaux 3/8 in. Thick x 4-1/4 in. Wide x Random Length Engineered Click Wood Flooring (20 sq. ft. / case)

  • Get It Installed - Call 855-978-2910
$4.28 /sq. ft.
Covers 20.0 sq. ft.
$85.60 /case

Choose Your Options

  • Bordeaux
  • Dusk
  • Honey
  • Latte
  • Mink
  • Natural

Frequently Bought Together

Product Overview

This durable prefinished engineered click real oak floor is easy to install Simply engage the long sides at an angle and press down. The flooring is crafted of five layers of solid wood permanently bonded together in a cross-ply design. No HDF or other fiber boards are utilized. The stability of this construction provides superior strength, humidity resistance, and installation options (glue-less, floating, or glue down). The aluminum oxide finish provides 10 times more abrasion resistance than ordinary urethane finishes. Our company has been manufacturing wood floors to exacting standards in Johnson City, Tennessee for over 110 years. This product is CARB Phase II Certified.

California residents: see   Proposition 65 information

  • Wood Species: Real Domestic Oak Hardwood
  • 3/8 in. Thickness x 4-1/4 in. Width x Random Length Planks up to 46-1/4 in.
  • 20 sq. ft. per case and case weight is 28 lb.
  • Construction: 5 ply cross grain Engineered Wood Flooring
  • Prefinished Bordeaux Dark Color, Medium Gloss, Clear Finish
  • Planks have micro-beveled edges
  • Janka wood hardness rating/resistance to denting: 1290
  • Appropriate Grade for Installation: Above Grade, On Grade or Below Grade
  • Installation: Float or glue down
  • Residential use
  • 30-year finish warranty and limited lifetime residential defect warranty
  • Don't forget your coordinating trim and moldings
  • Shipping: All online orders for this item ship via parcel ground and may arrive in multiple boxes
  • It is recommended you purchase a minimum of 10% overage to account for cuts




Warranty / Certifications

More Products With These Features


Customer Questions & Answers

Is this flooring supposed to creak when walking on?

Asked by: Leee
No it should not. We used the premium underlayment and have been very disappointed with this product. It is too weak and flexes too much which causes the squeaking. The last flooring I had used was glued as each piece was installed this worked out great. That floor was 1/2" with an 1/8" wear layer. This Vintage Maple product is 3/8" with a 1/16" wear layer. We were fooled by the look of the wood which is nice but that is where it ends. This product is not suitable for flooring.
Answered by: Carpenterdiem
Date published: 2015-11-06

I need to know if this wood needs to be tapped into place or simply layed down.

The row you are working on always seems to stick up on the long edge and does not lay flat, will additional rows pull the wood flat. Is there a suggested tool or hardware that will help with the installation.
Asked by: Anonymous
It takes a light tap. I used a 4x4 block to tap into groove and then to seat good.
Answered by: Jim
Date published: 2015-09-20

can black felt paper be used as underlayment between subfloor and this engineered hardwood

Asked by: Doug
I would not use an underlayment made for a roof on my floor. These floors are made to have some cushion underneath which helps when the floor floats over high/low areas that have not been sorted out with floor leveling products. The felt paper would not be enough cushion. I had used the plastic air entrained underlayment and that worked great for the fourteen years we lived in our last house. That said I would never use this Vintage Maple flooring again after our experience. This flooring scratches so easily you would not believe it. It will pit and dent just from putting a chair on it. We put felt pads under all of our chairs yet we still experienced some pitting which really looks bad. I am looking into to trying to finish over these places but the veneer is so thin you could easily sand thru it in a second. If I come across a way to safely finish these problems areas I will post it. In the mean time look for another company and product. This product is poorly made and should not be used on a floor anywhere. Don't be fooled by the "hardness rating" it is for the wood species not the product made with it. Fortunately this is not the case for all engineered products. If I could have found the flooring we had used in our last house I would have used it in this new one and saved myself money and aggravation.
Answered by: Carpenterdiem
Date published: 2015-11-06

how red is this floor?

I am considering it as a first option but I want to make sure it doesn't have a red/orange feel to it, but rather a warmth to the wood tone.
Asked by: michael
Did not notice any red in this wood color. It looks medium dark at a distance, but standing upon the floor it appears lighter in color. Some boards are a bit darker than others, another reason to mix the boxes upon installing for a clean natural finish.
Answered by: Jim
Date published: 2016-03-07
  • y_2017, m_5, d_18, h_23CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_54
  • loc_, sid_202034710, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 89ms

Customer Reviews

  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 106ms
  • bvseo-msg: The resource to the URL or file is currently unavailable.;