Rated 4.5 out of 5 by 60
Rated 4.0 out of 5.0 by keny Has the bits used most of the time, at least for us.
I got tired of ordering full sets of hole saws, and having some of them, usually under 2 1/2" get worn out and the larger ones multiplying since they are not used as often. This is a good small bit set, and they cut well.
October 18, 2016
Rated 5.0 out of 5.0 by gmoney hole dozer
Made so easy to complete small jobs around the house.
August 9, 2016
Rated 4.0 out of 5.0 by Pete A nice hole saw set
I have a mix-match of different holes saws and decided to consolidate and standardize.
This set is a good mix of sizes and includes two arbors. I like the "semi'-tool-less changeout ability with the larger arbor.
The hole cutting blades cut well.
I cut several holes through thin plastic walls in storage bins with not trouble whatsoever.
Later I cut several different holes through some 2/4 plywood and did run into a couple of issues that were the result of cutting holes in plywood lying flat.
The first problem was with all the holes, the cutters don't have chip-clearing grooves to help lift any sawdust out of the hole, so I had to drill a little, then lift the cutter our and blow the sawdust out of the hole. Otherwise the sawdust clogged the cutters and started to smoke and reduce the cutting efficiency of the blades.
The second problem was with the smaller diameter cutters in the plywood. As I cut through the layers of the plywood it separated and began to spin, That, in conjunction with the clogged teeth created a lot of smoke.
For both problems I had to pull the cutter out of the partially cut hole to clear sawdust and remove layers of plywood that separated during the drilling process.
One of the things I like about the Milwaukee kit is the wide selection of additional sizes available on the shelf at Home Depot.
July 19, 2016
Rated 5.0 out of 5.0 by Harryone Quality Product
Typical of Milwaukee Tools product, high quality at a reasonable price. They don't give these away but if you use your tools in your business or you're a serious hobbyist, this brand is always a good value.
June 28, 2016
Rated 5.0 out of 5.0 by sam best on the market--great price
best kit on the market--great quality--superior store employees
July 13, 2016
Rated 5.0 out of 5.0 by MACs best out there
Was drilling in 3/8 thick cruved metal beams 3/4 holes with a magnitc drill press couldnt get the magnit to stick too much cruved couldnt get the job done came back the next day with one of these badboys drilled 45 3/4 holes in 3/8 thick metal like butter just add lots of oil so it wont heat up still like new
July 1, 2016
Rated 5.0 out of 5.0 by steve High quality
This hole kit has high quality components and is easy to use!
June 14, 2016
Rated 5.0 out of 5.0 by Skippy Great deal
This is a great kit and very easy to use. The price was very good
April 12, 2016